Newsletter 697: Capri TurboJanuary 8^th, 2026

Originally released back in 1979, Tamiya is reissuing the scale model kit of the spectacular Group 5 Ford Capri from the Zakspeed team, which competed in the German Touring Car Championship (DRM) during the 1970s. The kit retains the same parts list, including the driver figure for the interior, although it omits the electric motor and its mechanisms from the first edition. This reissue includes revised instructions and a decal sheet, as well as a masking sheet to aid in painting the frames on the clear parts.

Fantastic MFH kit where, as usual, several materials are combined, including resin, white metal, turned metal parts, photo-etched parts, rubber tires, different cables and materials to recreate the pipes and connections, and several decal sheets that also include various carbon patterns. The rims are turned in golden aluminum with a totally realistic finish. This reference reproduces the version with which Jean Alesi achieved his first and only victory in Formula 1, on the occasion of the Canadian Grand Prix held on the Gilles Villeneuve circuit in Montreal in June 1995.

A comprehensive set of parts for meticulous detailing, featuring 3D-printed components far more detailed than the original parts included in the scale model kit, this 1/24 scale BMW M4 GT3 interior kit is a must-have. Virtually no element has been overlooked, including a new seat, control units, fire extinguisher, ABS module, ballast box, air conditioning ducts, multifunction steering wheel, fuel tank caps, and even some of the pipes and wiring harnesses running under the cockpit floor. As an added bonus, it includes exterior elements such as mirrors and new 18-inch tires with Pirelli logos printed on the sidewalls. If you want to customize your BMW M4 GT3, this is a must-have.

Most of the changes to the BMW M4 GT3 Evo are mechanical, but externally, the Evo version can be identified by its new headlights and taillights. To help you transform Nunu's scale model kit into the Evo version, this set includes the headlight and taillight housings, which create the new look of its lights.

Set of 4 rims for your Nunu BMW M4 GT3 scale model kit. The center nuts are printed as separate pieces. The rims can be mounted on the kit's original tires.

We were almost speechless after hearing the news about this release! The entire rear section of the stunning Lancia Delta S4 has been reproduced in incredible detail, ready for your Beemax/Nunu Lancia Delta S4 scale model kit. The parts include the complete engine assembly, rear chassis, gearbox, transmission, and rear suspension, all 3D printed. Developed by GPmodeling and accompanied by a comprehensive instruction manual detailing the necessary modifications, it fits the Lancia S4 perfectly. It's even a marvel to display on its own!

Replacement seat for the Tamiya Benetton Ford B192 scale model kit. The new seat has been reproduced in great detail, including the holes for the different harness sections, replacing the kit part that has the seatbelts pre-formed into the plastic itself. Even the opening through which the cockpit wiring harnesses would pass in the real car has been reproduced. A set of harness buckles is also included to build a detailed replica of the original seatbelts.

Set of 4 Michelin Formula 1 rain tires with the design used in the 1984 season, ideal for recreating memorable events such as the Monaco Grand Prix held in the rain. The tires have additional sidewall markings and are modeled as faithfully as possible. This set includes the rims used on the Toleman Hart TG184, along with the lug nuts, air valves, and two stencils for painting the Michelin logos onto the tires. It is recommended to use only acrylic paints. The use of solvent-based paints softens the resin from which the stencil is made, so the fine details of some of the lettering may come loose and disappear. The complete set of wheels can be used on AMD, MFH, or Neko scale model kits.

Set of 4 Goodyear Formula 1 rain tires with the design used in the 1984 season, ideal for recreating memorable events such as the Monaco Grand Prix held in the rain. The tires have additional sidewall markings and are modeled as faithfully as possible. This set includes the rims used on the Tyrrell Ford 012, along with the lug nuts, air valves, and two stencils for painting the Goodyear logos onto the tires. It is recommended to use only acrylic paints. The use of solvent-based paints softens the resin from which the stencil is made, so the fine details of some of the lettering may come loose and disappear. The complete set of wheels can be used on Wolf Models or Studio27 scale model kits.

This detailing set allows you to customize the front engine bay, including the engine block, of the Belkits Toyota Yaris Rally1 Hybrid scale model kit. The engine components have been separated to facilitate the painting process and to accurately and realistically reproduce the original engine. This kit does not include a hood, so the original hood from the kit must be cut out and reused. Some additional details and parts are included if you prefer to display the engine outside the car.

Complete set of wheels to transform the Belkits Toyota Yaris Rally1 Hybrid scale model kit into its tarmac version, with the corresponding lowering of the ride height. The suspension has been designed to easily adapt to the original kit parts by simply bending the original suspension arms slightly and installing the new suspension parts. This set includes 5 rims, tires, wheel hubs with nuts and center caps, with the parts separated for easy detailing and painting.

Assembled collector's model at 1/43 scale that reproduces the version of the Group 5 BMW 3.5 CSL that achieved victory in the third round of the 1978 World Championship for Makes season, the 6 Hours of Silverstone.

Assembled collector's model at 1/43 scale that reproduces the version of the Porsche 935/78 that achieved third position in Division I in the first round of the 1981 season of the German Touring Car Championship (DRM) held at the Zolder circuit.

Assembled collector's model at 1/43 scale that reproduces the version of the Lancia Beta Montecarlo Turbo that achieved fifth position, third among Group 5, in the eighth round of the 1979 World Championship for Makes season, the 6 Hours of Brands Hatch.

If the Kawasaki Ninja ZX-10R was already a brutal machine, what can we say about the RR? A model of which only 500 units were produced, and which raises the bar even further for the Ninja. This scale model kit accurately reproduces its aerodynamic and aggressive design. Its special 998cc inline four-stroke engine with titanium connecting rods and VAI variable intake system has also been precisely replicated, as has the twin-spar frame, which masterfully combines strength and lightness. Its exclusive seven-spoke Marchesini forged rims, which are one of the elements that differentiate the ZX-10R from the RR, have also been reproduced in minute detail. The front and rear shock absorbers, as well as the steering damper, are movable. The kit includes seats and tires made of soft vinyl, which realistically reproduce the texture of the real parts. The stainless steel brake discs are not only highly detailed but also offer a texture similar to the authentic ones. The mirrors and Kawasaki emblem have been recreated with metallic decals, providing a completely realistic finish. The kit's decals allow you to choose between two different paint schemes.

A fantastic 36-page A4 guide, published by Model Factory Hiro, and packed with current photographs of the Honda RA302 housed in the Honda Museum, known as the Collection Hall. The photos focus on the car's details, such as the cockpit and engine, with modelers and detail enthusiasts in mind. The Honda RA302 pictured is number 802, which only participated in practice for the 1968 Italian Grand Prix, the ninth race of that season. The other RA302 ever built, which debuted at the 1968 French Grand Prix, crashed and caught fire during that same race and was never rebuilt. While this car differs from the version that raced in the 1968 French Grand Prix, both were designed to be very similar.

Decal sheet designed to replace those for the Tamiya Nissan Skyline Xanavi Nismo GT-R (R34) scale model kit. The decal sheet is essentially the same version as the Tamiya kit, but with the difference that the colored stripes and sponsor logos are separate decals, and the yellow ink used is fluorescent. Naturally, all logos have been more accurately scaled to the actual size, and some additional decals are included, such as those for the ballast weights that were added based on race results.

Although in 1990 the team already laid the first stone with the participation of a Skyline R32 GT-R within the category of series cars or Gr.N, it was in 1991 when it obtained one of its greatest successes, the absolute victory in the 24 Hours of Spa, with an overwhelming dominance, which was also supported by the victory of Skyline registered as Gr.N, in what was one of the first Skyline victories outside of Japan, but without a doubt the most renowned. Any of the three Zexel sponsored builds, the 1990 and 1991 Gr.N, as well as the overall Gr.A winner in 1991, can be completed with this superb decal sheet, initially designed to fit Tamiya kits of the Nissan Skyline GT-R Gr.N and Gr.A respectively.

High-quality decals made in Japan. These decals are from a limited series and will only be available for a short time. They are designed to replace the original decals on Tamiya McLaren Honda MP4/7 scale model kits. Of course, the Marlboro logo decals, which are not included with the kit, are also included.

Set of four 3D printed resin rims, 1/24 scale, with a design similar to the 15-inch OZ Racing WRC gravel rims used by several teams, such as Peugeot, on their WRC cars. Designed for use on the Tamiya Peugeot 307 WRC scale model kit, therefore, the rear coupling is via a rod. A set of rubber tires with tread pattern, identical to reference USCP-15-5, is included.

BMW motorcycles have been a common sight on our roads for decades, and in many cases, objects of desire. However, it wasn't until September 2020 that BMW's renowned M racing division launched its first model, the BMW M 1000 RR. This machine, powered by a 999cc inline four-cylinder engine, is fully optimized for racing. It incorporates carbon fiber winglets, a precision suspension system, and a chassis specifically designed for track performance. It has been the base motorcycle used by BMW in the Superbike World Championship, where it secured the titles in 2024 and 2025. This scale model kit accurately reproduces its aerodynamic and aggressive design, as well as the chassis and engine. The included decals allow you to choose between two different paint schemes. A truly impressive kit!

Complete set with all the necessary parts to replace the master cylinders and brake fluid reservoirs on Beemax's 1/12 scale McLaren Honda MP4/4 model kits. The detail on the new 3D-printed parts is incredible, including even the connections for the brake lines. Simply perfect!

Exquisite 3D printed reproduction of the complete front grille to replace the original included with the Beemax Group 5 BMW 320 E21 Turbo scale model kit. The meticulous printing ensures the entire grille has through-slats, just like the real grille, and with remarkably fine slats. Furthermore, the central kidney grille section has been printed separately, facilitating painting, as have the air intake trumpets that replace the headlights. Spectacular!

If there's one striking feature of Group 5 cars, besides their widened bodies and powerful turbocharged engines, it was the enormous wheels that had to be fitted to manage the immense power output, which also necessitated improved brake management and cooling. One of the most common elements used to help extract the hot air generated by the brakes were air vents, which, in the case of BBS, mimicked the design of the honeycomb rims they covered. The 3D-printed parts from Fat Frog Models reproduce these aerodynamic covers in exquisite detail, adding a much more realistic touch to the wheels of your Beemax scale model kits, and are compatible with the references for the BMW 320 E21 and the 1979 Porsche 935 Group 5 cars.

Set of 3D printed parts designed to replace the original chain on the Tamiya 1/12 scale Kawasaki ZZR 1400 scale model kit. The chain is highly detailed, including the links between each one, and both the front and rear sprockets incorporate the fastening bolts, also reproduced with great detail.

Set of 3D printed parts designed to replace the original chain on the Tamiya 1/12 scale Honda Dax 125 scale model kit. The chain is highly detailed, including the links between each one, and both the front and rear sprockets incorporate the fastening bolts, also reproduced with great detail.

Set of 3D printed parts designed to replace the original chain on Fujimi's 1/12 scale Suzuki GSX-R750 scale model kit from the 1986 Suzuka 8 Hours. The chain meticulously reproduces the links, including the gap between each link, and both the sprocket and pinion incorporate the fastening screws, also reproduced with great detail.

Set of 3D-printed parts designed to replace the original chain on Hasegawa's 1/12 scale Honda RS250RW scale model kits. The chain is highly detailed, including the links, and both the front and rear sprockets incorporate the fastening bolts, also reproduced with great precision. This reference also includes the clutch assembly, further enhancing the detail of the original part.

Set of parts that reproduce in great detail the side air intake grilles for your Nunu Porsche 911 991 RSR GT3 scale model kits. One of those simple details that exponentially increases the realism of your model.

Set of parts that meticulously reproduce one of the most distinctive features of the BMW M4 GT3: its vertically mounted, side-mounted front exhaust. In addition to the exhaust assembly itself, the set includes the grille and the reinforcements located between the fender and the wheel arches. An essential detail to enhance your model!

Set of parts that reproduce in great detail many of the connectors used in the electrical harnesses of 1980s vehicles, suitable for detailing your 1/12 scale models. The parts reproduce connectors where the male and female parts are connected to each other.

Set of parts that reproduce in great detail many of the connectors used in the wiring harnesses of 1980s vehicles, suitable for detailing your 1/12 scale models. The parts reproduce both connectors with the male and female parts connected, as well as both parts of the connectors disconnected.

New installment of Komakai's Fast Guides series, with a publication full of exquisite photographs that cover in great detail the spectacular Audi A4 Quattro. Includes 32 full color pages with detailed images of the interior, exterior, wheels, etc...

New book of the Ultra Detail Guides series, this time about the Lancia Beta Montecarlo Turbo .

We are genuinely delighted that Studio27 has embarked on developing a new livery for the Tamiya scale model kit of the Porsche 911 GT1, a timeless classic. The chosen livery is based on the car that the Kremer team entered in the 1997 24 Hours of Le Mans, sporting a sponsor closely associated with Porsche for several years: FATurbo-Express. The car was fast in qualifying but was unable to finish the race due to overheating issues.

After all its successes in the World Rally Championship, the Lancia Delta HF Integrale was already a cult classic, and during its final months of production, several special editions were released with specific equipment and exterior details, such as the stripes that adorned its bodywork. Studio27 has compiled the necessary stripes in this decal sheet so you can choose from four of these special editions: two dedicated to the successes achieved with Martini, another called "Blue Lagos," which, as its name suggests, was painted in an exclusive blue color, and the "Collezione" version. Which one do you prefer to pay tribute to such a successful model?

Complete decal sheet to create the different liveries of the Skyline GT-R R33 unit of the Impul team, sponsored by Calsonic, during its participation in the Japanese GT Championship in the seasons between 1995 and 1998, inclusive.

Decal sheet to reproduce the version that won the 1981 Macau race, driven by Manfred Winkelhock, who wore number 1. The decals also allow you to make the team's second car with number 2, driven by local driver Herbert Adamczyk, who had to retire.

Decal sheet to reproduce the Group 5 version of the BMW 320 E21 Turbo with which Roberto Ravaglia participated in the Selangor Jubilee Grand Prix in 1985, an event held at the Shah Alam circuit in Malaysia.