Newsletter 691: Cyber Monday 2025November 27^th, 2025

There are trailers for cars and trailers for trucks, but a suitable trailer for attaching to a tractor was missing... and that's precisely what Heller has just presented: a 3-ton trailer scale model kit that can be attached to any of their tractor kits. Several trailers can even be coupled together to form a convoy. The trailer's front axle is designed to rotate freely, allowing for adjustments to its position. The trailer's sides can be mounted in either an open or closed position.

Set of 5 3D printed resin rims at 1/24 scale with a design similar to the 14-inch Gotti R17 rims used by Renault on many of its racing models. One of the rims comes without the lug nuts, allowing it to be used as a spare wheel. The rims are designed to be used with the tires and mounting system of Italeri Renault R5 Alpine scale model kits. The center of the rim, which is usually a different color, comes as a separate piece, making painting easier.

Set of 5 3D printed resin rims at 1/24 scale with a design similar to the 14-inch Fergat 4 rims used by Renault on many of its models. One of the rims does not include the lug nuts, allowing it to be used as a spare wheel. The rims are designed to be used with the tires and mounting system of Italeri Renault R5 Alpine scale model kits.

Set of four 3D printed resin rims, 1/24 scale, with a design similar to the 15-inch OZ Racing WRC gravel rims used by several teams, such as Peugeot, on their WRC cars. Designed for use on the Tamiya Peugeot 307 WRC scale model kit, therefore, the rear coupling is via a rod. A set of rubber tires with tread pattern, identical to reference USCP-15-5, is included.

If the Kawasaki Ninja ZX-10R was already a brutal machine, what can we say about the RR? A model of which only 500 units were produced, and which raises the bar even further for the Ninja. This scale model kit accurately reproduces its aerodynamic and aggressive design. Its special 998cc inline four-stroke engine with titanium connecting rods and VAI variable intake system has also been precisely replicated, as has the twin-spar frame, which masterfully combines strength and lightness. Its exclusive seven-spoke Marchesini forged rims, which are one of the elements that differentiate the ZX-10R from the RR, have also been reproduced in minute detail. The front and rear shock absorbers, as well as the steering damper, are movable. The kit includes seats and tires made of soft vinyl, which realistically reproduce the texture of the real parts. The stainless steel brake discs are not only highly detailed but also offer a texture similar to the authentic ones. The mirrors and Kawasaki emblem have been recreated with metallic decals, providing a completely realistic finish. The kit's decals allow you to choose between two different paint schemes.

10 brass screws with hexagonal nut heads, 0.5 mm wide between parallel faces, on a 0.7 mm diameter base. The screw shaft, which you can cut to size, is 0.4 mm in diameter.

10 brass screws with hexagonal nut heads, 0.6 mm wide between parallel faces, on a 0.8 mm diameter base. The screw shaft, which you can cut to size, is 0.4 mm in diameter.

10 brass screws with hexagonal nut heads, 0.7 mm wide between parallel faces, on a 0.9 mm diameter base. The screw shaft, which you can cut to size, is 0.4 mm in diameter.

10 brass screws with hexagonal nut heads, 0.8 mm wide between parallel faces, on a 1.0 mm diameter base. The screw shaft, which you can cut to size, is 0.5 mm in diameter.

10 brass screws with hexagonal nut heads, 0.9 mm wide between parallel faces, on a 1.1 mm diameter base. The screw shaft, which you can cut to size, is 0.5 mm in diameter.

10 brass screws with hexagonal nut heads, 1.0 mm wide between parallel faces, on a 1.2 mm diameter base. The screw shaft, which you can cut to size, is 0.6 mm in diameter.

Assembled collector's model that reproduces the version of the Porsche 911 Carrera RSR used by AJ Foyt in the final of the four 1974 IROC races, held at Daytona Riverside in mid-February 1974, where he finished sixth. These results allowed him to finish sixth in the final standings, second among USAC Champ Car drivers.

Assembled collector's model that reproduces the version of the Peugeot 306 Maxi used by Jaime Azcona, accompanied on his right by Julius Billmaier, in the 1997 Avilés Rally, a round valid for the Spanish Rally Championship, where he obtained victory.

1/24 scale wheel and tire set for the fantastic Heller Peugeot 205 GTI scale model kit. Enhance the look of your model with this complete wheel set, which includes 15-inch Speedline rims, Michelin MXV tires with full sidewall markings, lug nuts, and air valves. All the highly detailed parts are supplied separately for easy painting.

Who doesn't want to further enhance the look of Toyota's beautiful GT? Decalcas wants to give you the option of giving your Tamiya kit of the Toyota Supra GR a more radical look, and to that end, they've designed the Voltex Type 12 rear wing with its mounts. Made in 3D resin with Decalcas' usual print quality and impressive fit.

There are details that are worth seeing due to their visibility, such as the antennas that the Ferraris of the 2000 and 2001 seasons mounted in front of the driver's cockpit. Three fantastic pieces in turned metal, plus a metal tube to make the Pitot tube, make up this Top Studio antenna set. Essential!

Assembled collector's model that reproduces the Mitsubishi Galant VR-4 Group A version with which the Swedish duo of Kenneth Eriksson and Staffan Parmander achieved second position in the 1990 Lombard RAC Rally.

Collector's assembled model that reproduces the Mitsubishi Galant VR-4 Group A version with which Ari Vatanen, accompanied in the co-driver's role by Bruno Berglund, participated in the 1990 Lombard RAC Rally, where problems with the power steering forced him to retire at the end of the third day.

Limited edition of the Toyota 92 Group C used by the Tom's team in the Suzuka 500 km, the first round of the 1992 Japanese Sports Prototype Championship, where it obtained fifth position. Regarding the Hasegawa kit of the Toyota 91C-V, it includes new parts, such as the side door windows without the third air intake hole, different aerodynamic elements in the nose, or some extra grilles for air extraction on the front wings. We love this decoration entirely in red!

The official Mazda team fielded two cars in the 1979 Daytona 24 hours, the number #7 and the number #77, which were easily differentiated since, although the decoration followed the same design, the colors were different. And in addition, they achieved the double in the GTU category, also achieving fifth and sixth place overall. This reference allows the #77 number to be made, with a complete detail of the interior and the lower part of the chassis and suspensions, as well as having some exquisite fits. The kit also includes masks to paint the window frames.

The second reference of the Hasegawa's new scale model kit of one of Japan's most charismatic cars, the Toyota Starlet KP61, allows you to recreate the racing version that won the Starlet Grand Cup Race Championship in 1983. The kit is highly detailed, fits together perfectly, and includes all the parts needed to recreate the racing version, starting with a different body than the road-going version, which features a sunroof, front and rear spoilers, a roll bar, new suspension, brakes, and, for this occasion, new rims. How can you resist?

Hasegawa has developed entirely new molds for creating the scale model kit of the European market version of the Kawasaki GPZ900R (A1). The kit is designed to be assembled with or without the fairing and faithfully reproduces all the details of the real motorcycle, including its 908cc engine mounted on a diamond frame. Interestingly, this model was nicknamed "Ninja" in the American market, a moniker that has stuck to this day, becoming an iconic Kawasaki name.

Limited edition of the Hasegawa scale model kit of the Lancia Delta HF Integrale 16V, featuring the livery used by Juha Kankkunen during the 1991 Race of Champions, held at the Jarama circuit near Madrid, Spain. This event took place after the World Rally Championship season, where world champion drivers competed in one-on-one elimination races on a mixed gravel and tarmac course. Didier Auriol and Juha Kankkunen reached the final, with Kankkunen emerging victorious. The only difference between this reference and other versions of the same Hasegawa kit is the new decal sheet.

The Suzuki Jimny is one of those almost immortal cars, one that has remained a fixture for decades. Its second generation, manufactured between 1981 and 1998, also included different versions and variants, among them the JA11. The scale model kit features great detail in the interior and lower chassis, and the parts fit together very well. This set includes a new decal sheet with new side stripes.

During its production run, several special editions were created based on the various evolutions of the Lancia Delta HF Integrale, but perhaps the most special, sought-after, and desired is the last one produced, called the "Edizione Finale" or "Dealer's Collection." This is not only due to the limited number of units available—180—but also because this exclusive edition was reserved solely for Lancia dealerships as a farewell gift. Other exclusive details included its pearl red paint, beige Recaro seats, and factory-installed push-button start. As an exterior touch, a yellow and blue stripe ran down the center of the car from front to back. If you like this tribute to the legendary Lancia Delta Integrale, now you have the opportunity to build a 1/24 scale model of it. However, be aware that there may be some differences in detail between the kit and the real car, especially regarding the interior.

Would you love to build a 1/9 scale Honda CBR1000RR-R Fireblade SP, but aren't convinced by the pre-painted versions? Or perhaps you'd prefer to create your own version, choosing different colors? Well, for all of you who prefer to paint the parts yourselves, Magic Factory now offers the option of purchasing the scale model kit unpainted, just like any other conventional kit, while maintaining the same assembly system without the need for glue. The kit defines the mechanical parts and chassis in great detail and includes several interesting features, such as the metal front fork, epoxy resin decals for the Honda logos on the tank, and even a handy magnetic mat so you can place the necessary screws for assembly on it without risk of losing them.

Up to 3 decal sheets are included in this reference to recreate the JGTC Honda NSX Avex Mugen, perfect to replace the ones on the Tamiya kit of this same version, or to adapt any of the other Tamiya NSX references. One of the most splendid decorations of the championship, with a whole set of lights and flashes that leave no one indifferent.

There are several decorations that the Porsche team has been using on their 911 GT3 RSR as a tribute to some of their successes, such as this one recalling the successes of Bob Akin, with his famous Porsches sponsored by Coca-Cola. This decal sheet will allow you to reproduce this exclusive version, which was only used on the occasion of the last race of the 2019 IMSA WeatherTech Championship held at the Road Atlanta circuit. Don't you think it's beautiful?

There are models that are very recognizable just because of their decoration, and beyond their results on the track. Who hasn't seen or heard of the green Porsche with the dinosaur decoration? This is precisely the decoration that allows us to complete this decal sheet, in the version that participated, completing the event, in the 24 Hours of Le Mans in 2023. To complete the correct model, in addition to the Nunu kit of the Porsche 911 991 GT3 RSR, the ZoomOn brand transkit reference Z187 is needed to convert it into the Porsche 911.2 RSR 2020.

White color tone similar to that used on the Lancia Beta Montecarlo Turbo, such as that of the Martini Racing Team. It's the perfect shade for painting the Esci and Heller scale model kits.

Detailing set for your Tamiya kit of the Tamiya Jordan Ford 191. This set includes new parts not included in the kit, but also parts to replace some of the originals, increasing the detail and realism of the assembled model. In addition to parts for the engine and transmission area, upgraded parts for the rear suspensions and cockpit are also included. Rear brake hubs with air intakes allow you to recreate the Belgian GP version. In addition, a set of detailed parts for the open representation of the front shock absorber unit is included. Really complete!

Set of 4 rims designed to simulate the BBS rim design used by the RAM team on their 1985 03 single-seater, a rim model also used by other teams. The rims are manufactured in 3 parts to facilitate painting. This set of rims is not designed for a specific kit, so it may be necessary to adapt the rims to fully fit the model. The rims are suitable for mounting on the tires of Tamiya / Fujimi kits from 1981 to 1992 sessions. Tires not included.

Cockpit tub conversion set to replace part B2 on the Ebbro Lotus 33 kit. The new part reproduces the shapes, size, and details of the real car much more faithfully, as the part used in the kit is the same part Tamiya used on its Lotus 25 kit. In addition to the new tub, new parts are also included to replace parts B23, A33, B3, and B6 on the kit, and a new oil tank.

A set designed for use on Profil24 kit of the Porsche 911 GT1, including the air vents. These parts allow for the replacement and more realistic recreation of the air vents mounted on the front fenders, used for front brake ventilation, and the cockpit and engine cooling vents mounted on the rear windows.

Replacement seat for the Tamiya kit of the Lotus Ford 107 and 107B. The new seat has been reproduced in great detail, including the holes for the various harness sections, replacing the kit part that has the belts preformed in the plastic of the piece itself. A set of harness buckles is also included to build a detailed replica of the original seat belts.

Set of 3D-printed parts that will allow you to enhance the finish and detail of your Italeri Renault R5 Alpine scale model kit, with pieces compatible with both the road and rally versions. Among many other parts, the set includes the front grille, headlights (giving the lighting a much more realistic depth), rear grilles located on the pillars, rearview mirrors, windshield wipers, and some details from the competition version, such as the rear hood latches and the fuel filler cap. What a great help!

The Gallardo was unveiled by Lamborghini at the Genoa Motor Show in 2003. It featured a 500 hp V10 engine and all-wheel drive. This new Italeri scale model kit lets you build this supercar in 1/24 scale, taking advantage of the molds of the Fujimi kit for this purpose, with a rear hood that opens and closes, revealing the engine compartment. Once assembled, the model measures 17.9 cm in length.

Set of BBS E50 rims designed for Group 5 models, such as the BMW 320 Turbo, Ford Capri, and Lancia Beta Montecarlo, among others. The front rims are equivalent to 16-inch rims, while the rear rims are larger at 19 inches. The center nuts are made of aluminum, and the rim core is supplied as photo-etched parts in gold. Slick tires are included.

Assembled collector's model that reproduces the version of the Toyota Yaris GR Hybrid Rally1 with which Sami Pajari, accompanied on his right by Marko Salminen, achieved fourth position in the 2025 Safari Kenya Rally.