Newsletter 674: One bit at a timeJuly 31^st, 2025

The different versions of the BMW 1600 and 2002 also based part of their fame on their participation in circuits, where their constant evolution led to the appearance of increasingly wider bodies capable of housing increasingly larger wheels. Scale Production has developed a complete transkit with which to convert any of the rally version references of Hasegawa's BMW 2002 kit into the circuit version. New front and rear wings, rims with slick tires, side exhaust, interior fire extinguisher, fuel filler neck, cone-type exterior mirror, rubber closures for the hoods, fabric for the belts... along with a photo-etched sheet for the harness buckles.

The optics used by the renowned car tuner Singer in their Porsche 911 evolutions.

Resins parts to carry out the transformation of the Volkswagen T1 Pick Up van in the Doka version. This product is specially designed to be used on the basis of the Hasegawa model. The transkit includes the complete bodywork, the three panels for the rear cargo box, the second row seat in the cab and the front Volkswagen emblem.

Transkit with 3D printed parts to transform the 1/12 scale Italeri version of the Lancia Delta to which the 8-valve engine was mounted. The transkit includes a new engine hood with its fully detailed interior reinforcements, new engine parts such as the 8-valve cylinder head or the intercooler, some of the auxiliary elements such as the air intake to the passenger compartment or the air filter cover, as well as other interior elements of the passenger compartment such as the jacks or the strap hardware to hold the spare wheel.

Set of 1/20 scale rims with a design similar to the Campagnolo rims fitted to some Group 4 versions of the Fiat 131 Abarth, such as those sponsored by Olio Fiat. The rims are designed to be used in conjunction with the original Tamiya kit tires. The front rims are slightly smaller than the rear rims.

Thanks to this decal sheet, you can turn your Tamiya Porsche 962C kit into the official Porsche Team version, complete with the iconic colors of its main sponsor, Rothmans. This reference includes a second decal sheet featuring the tobacco logos.

The fourth Legrand reference in 1/8 scale may seem like a re-edition, but it is not... and the two units that were produced of the Mercedes-Benz 300 SLR Uhlenhaut Coupé present some important differences between themselves, both in the interior, completely in red instead of the blue of the previous version, as on the outside, with a striking and enormous Eberspächer exhaust silencer located directly on the right side of the body, the round exterior mirror, and not having a fuel filler through the rear window. The weight of the finished model is approximately 7 kg, it is made of die-cast metal and is already painted. It includes more than 900 pieces made of different materials such as metal, rubber, textiles and high-quality plastic, and is easily assembled, since many of its pieces are screwed together. The steering and suspension are functional, as are the doors and hoods. The measurements once assembled are: 550 x 210 x 160 cm.

Set of 3D printed parts for detailing the Street-Custom version of Tamiya's Nissan Fairlady 240Z kit. Inside the box you'll find parts such as the front grille, the upper and lower parts of the steering column, the radiator fan, the timing belt with grooved pulleys, the coil with holder and the ignition distributor, the battery with separately printed cable connectors, and a wide variety of screws for the front and rear fenders, the rims or the front shock absorbers. Some spare parts for smaller parts, such as bolts, are included.

Complete transkit to make the three bikes used by the official HRC team in the 1993 season in the 500cc World Championship using the Tamiya model of the 1998 Honda NSR500 as a base. The parts include the complete fairing, tail, swingarm rear, chassis profiles, brake discs, front fork... and much more. The decal sheet also includes the option of making the bike with the number #8 participating in the last rounds of the Japanese 500cc championship (All Japan Road Race Championship).

In 1994 there was a historic moment in the Japanese 500cc GP, when Norick Abe, wildcard rider to the race, led the race on lap 11 in front of names like Schwantz, Doohan, Cadalora or Kocinski, holding on in front before crashing. with three laps to go. Abe was riding a Honda NSR500 with the number #56, and thanks to this Studio27 transkit, with new rims, fairing, fuel tank, tail, rear swingarm, chassis beam, etc. now we can make based on the Tamiya kit.

Tabu Design has prepared a decal sheet that complements those of the Tamiya kit of the Porsche 962C in its Jägermeister version, which not only includes some of the Shell logos that are not included in the original decal sheet, but also allows to make one of the most famous versions of this vehicle, the one that was proclaimed winner of the 1000 Kilometers of SPA in 1986, a result that had a great weight in the team title obtained by Brun Motorsport in the World Sports Car Championship in 1986.

Limited-time re-edition of the decal sheet with the complete livery of the different versions of the Benetton Ford B192 used during the 1992 season.

New and freshly printed, here's everything you needed to build your old Tamiya kit. A true classic that will shine in all its glory with these Tabu decals.

Additional decals from completing Michelin and Shell sponsors on the recently reedited Alfa Romeo 155 scale model kit by Tamiya

Newly designed decals to replace those of the 1/20 scale McLaren Honda MP4/4 Tamiya kit. One of the most notable features is the inclusion of tobacco advertising, which is not present on some versions of the kit. And as a curious fact for fans of the Italian driver, the decal sheet also includes the name of the test driver, Emanuele Pirro.

This reference has been developed to replace the original decals of the kit, while various modifications have been made, reviewing the size and design of the different logos. The Tamiya kit includes the decals to make the versions of the 1977 Monaco and Japanese Grands Prix, and with this Shunko reference you can also make the versions of the 1977 Argentine Grand Prix, where the team obtained its first victory, the 1977 Canadian Grand Prix, where they obtained their third victory in the team's hometown, and the 1978 Monaco Grand Prix, where in addition to achieving second place, the car presented a peculiar cover for the cockpit with protuberances on both sides. The golden decals to decorate the bodywork do not include logos to give the option of making those areas based on paint.

This decal sheet reference has been developed to replace the original decals of the kit, while various modifications have been made, reviewing the size and design of the different logos. The Tamiya kit includes decals to make the versions of the 1977 Monaco and Japanese Grands Prix, and with this Shunko reference you can also make the versions of the 1977 Argentine Grand Prix, where the team obtained its first victory, the 1977 Canadian Grand Prix, where they obtained their third victory in the team's hometown, and the 1978 Monaco Grand Prix, where in addition to achieving second place, the car presented a peculiar cockpit cover with protuberances on both sides. The golden decals to decorate the bodywork do not include logos to give the option of painting those areas. This 1/12 scale reference also includes decals for the cylinder head covers, and includes a large-format instruction manual, making it easy to read.

First released in 2011, we were thrilled to hear about the re-edition of the incredible Yamaha FZR750R OW01 Tamiya kit, a true street-legal superbike. This kit features a two-piece, upper and lower clear plastic fairing, just like the real bike. Its DOHC inline-4 engine and all its ancillary components, such as the carburetors and radiators, have been accurately reproduced, including much of the wiring, which can be recreated with the included vinyl tubing. Even the tire tread pattern is precisely sculpted, enhancing the appearance of the assembled model. We can't wait to get our hands on it and enjoy building it!

Detail-up set for the Tamiya 1/24 scale Porsche 962C model kits. This set includes parts such as the headlights, side marker lights, taillights, windshield wipers, emergency power cut-off switch, pneumatic system activation valve, various hood lock pins, exhaust and turbo outlets, fuel filler necks, oil filler cap, and rear wing center supports. All parts, even the transparent ones, are printed in 3D resin with a high level of detail. Enhance the realism of your model kit with this set from Decalcas!

A set of 3D-printed parts that will allow you to improve the finish and detail of your Tamiya Renault R5 Turbo kits, with parts that are suitable for both the street and rally versions. Among many other parts, these include the hood and front bumper grilles, the front and rear grilles located on the rear fenders, the windshield wipers, and all the front lights, giving the lighting a much more realistic depth. Without a doubt, these are the missing pieces to "modernize" the R5 Turbo kit!

Rubber made rain tyres, perfect for your MotoGP scale models in 1/12 scale. Front tire measures 49mm outer diameter, 36mm inner diameter, and 10mm wide. Rear tire measures 52mm outer diameter, 35mm inner diameter, and 16,5mm wide.

In the 1970s, Formula 1 cars were fitted with Goodyear tyres. This MFH reference reproduces the tyres used at that time, with the manufacturer's logo and other tyre information reproduced in great detail and in relief on the sidewalls. These tyres are designed to be used on the various Tamiya 1/20 scale kits, such as the McLaren M23, the Lotus Type 78 and Type 79, the Brabham BT46, the Wolf WR1 or the Ferrari 312T. Rims not included.

This set of tires replicates the design of Goodyear rain tires used between 1974 and 1978. The tire sidewalls feature embossed markings, including the manufacturer's name and some warning text. They are compatible with Tamiya scale model kits of the McLaren M23, Brabham BT46, Wolf WR1, and Lotus Type 78 and Type 79, among others. Rims are not included. Tyre dimensions are:

• Front: 26 mm outer diameter, 18 mm inner diameter, 15.5 mm wide.
• Rear: 33 mm outer diameter, 17 mm inner diameter, 24.5 mm wide.

Set of four narrow rain tires, as used in the Formula 1 World Championship since 1993. They are ideal for replicating, for example, the McLaren MP4/8 driven by Ayrton Senna in the 1993 European GP. The tires are made of polyurethane and are compatible with Tamiya kits. In addition to the tread pattern, the tire sidewalls also feature various embossings with logos and warnings. Rims not included.

Silver cable and connectors set for reproducing the pipes, pipes, and hydraulic or pneumatic connections found in your scale models. The silver cable is made of metallic-textured fiber, while the connectors are 3D printed. This item includes approximately 1 meter of cable and connectors designed to make pipes with an approximate diameter of 1.5 mm.

Silver cable and connectors set for reproducing the pipes, pipes, and hydraulic or pneumatic connections found in your scale models. The silver cable is made of metallic-textured fiber, while the connectors are 3D printed. This item includes approximately 1 meter of cable and connectors designed to make pipes with an approximate diameter of 0.8 mm.

Silver cable and connectors set for reproducing the pipes, pipes, and hydraulic or pneumatic connections found in your scale models. The silver cable is made of metallic-textured fiber, while the connectors are 3D printed. This item includes approximately 1 meter of cable and connectors designed to make pipes with an approximate diameter of 0.6 mm.

Roll of mesh hose with an approximate diameter of 1.8 mm, ideal for reproducing the braided hoses used in many vehicles for hydraulic, fuel, or pneumatic lines. Its tubular shape allows for bending and securing metal cables inside. Approximately 1.5 meters of tubing are supplied.

Red racing safety harness with up to six anchor points. Includes the necessary components to complete the harnesses for two seats, quick-release fasteners in various designs, red fabric, and a central anchor made of turned metal.

New issue of the Ultra Detail Guides series, this time about the Williams Renault FW13B. Includes a total of 122 A5-sized pages with full-color pictures taken of the vehicle nowadays.

An icon of the Italian sports cars of the 90s, the Lamborghini Diablo, now recreated by Italeri.

A kit that will allow you to reproduce the latest version of the legendary Countach released by Lamborghini, also taking advantage of the opportunity to commemorate the brand's 25th anniversary. A very complete kit, which also includes the parts necessary to assemble its powerful V12 engine.

Limited production kit to reproduce the late 1987 Suzuki GSX-R750 GR71G special edition (called the H-type) with a striking black and gold color scheme.

This limited edition kit by Hasegawa comes with photo-etched parts and with the intake grille!! It also includes seat belts fabric and the driver's helmet as well.

Limited edition of the Group C Toyota 91 Hasegawa kit, reproducing the unit used by the Tom's team in the Sugo 500km, the fifth round of the 1991 Japanese Sports Car Championship, where it achieved a brilliant victory.

New reference of the Hasegawa kit of the Nissan R32 GT-R Group A. This version allows to reproduce one of the most exclusive versions of the Skyline, as it only participated in one round, the sixth of the 1991 Japanese Touring Car Championship held at the Fuji Speedway circuit, where it achieved sixth position.

The history of the Volkswagen Beetle is so long, and its applications and uses so extensive, that it's rare to find a detachment or department that hasn't used it at one time or another. It was even used as a fire patrol! This Hasegawa reference is based on the Beetle Type 1 kit and includes some extra parts, such as the rotating roof light and warning speakers above the front fenders. The decals also allow for versions of up to three different brigades: the Inspection and Public Relations Department of the Shiki City Fire Department in Saitama Prefecture (Japan); the Zurich Fire Department (Switzerland); or the Antwerp Police Patrol (Belgium). Which would you choose?

A model kit that allows you to reproduce in great detail one of the iconic models in the history of the automobile... and in a version you've seen in numerous gangster films. For greater realism, in addition to the parts for building the car, some are included to recreate the weapons used by gangsters, and even the decals include some to simulate bullet holes in the bodywork. The construction of the model is a delight, with highly detailed chassis, side members, and engine.

Decal sheet to reproduce the Studie x CSLMotorsport team's version of the BMW M4 GT3 (G82), which made its debut in Japan in 2022. Although the season began with two retirements in the first two races, the team achieved its first victory in the GT300 class at the Suzuka 300 km, the third round of the championship. This decal sheet allows to reproduce this version based on the Nunu kit, and includes the carbon pattern decal set for the body reference LB-M4CF.