Newsletter 673: A life among scale modelsJuly 24^th, 2025

First released in 2011, we were thrilled to hear about the re-edition of the incredible Yamaha FZR750R OW01 Tamiya kit, a true street-legal superbike. This kit features a two-piece, upper and lower clear plastic fairing, just like the real bike. Its DOHC inline-4 engine and all its ancillary components, such as the carburetors and radiators, have been accurately reproduced, including much of the wiring, which can be recreated with the included vinyl tubing. Even the tire tread pattern is precisely sculpted, enhancing the appearance of the assembled model. We can't wait to get our hands on it and enjoy building it!

In 1993, the fourth generation of the Toyota Supra appeared, internally designated the A80. A coupé with a curvaceous design that has been reproduced with great precision in this kit. Also included are the active front spoiler and the large rear wing, a piece that was offered as an option. Another interesting aspect of the kit is the possibility of mounting its powerful inline -6 twin-turbo engine, reproduced down to the smallest detail. The underbody, with its advanced double wishbone suspension, has also been reproduced in great detail. The kit allows you to choose between the left-hand and right-hand drive version.

Nothing escapes Liberty Walk 's spectacular transformations, and the Lexus LC500 is one of its latest creations. Thanks to Kitbox PZY Model, you can build this spectacular scale version, which in its left-hand drive variant features a rear spoiler that is "detached" from the body. This kit is made of excellent-quality resin and features an extensive photo-etched sheet to reproduce every last detail. Awesome!

Nothing escapes Liberty Walk 's spectacular transformations, and the Lexus LC500 is one of its latest creations. Thanks to Kitbox PZY Model, you can build this spectacular scale version, which in its right-hand drive variant comes with a rear spoiler integrated into the bodywork. This kit is made of excellent-quality resin and features an extensive photo-etched sheet to reproduce every last detail. Awesome!

Three interesting decal sheets with the carbon patterns of the Tamiya Mercedes Benz AMG GT3. Driver's seat, dashboard, rear tray, front spoiler, inside of the headlights, the rear diffuser... and even each of the vertical ribs of the front grille. No carbon part is left uncovered with this set. Do not miss it!!

Decal sheet that will allow you to create one of the most spectacular liveries on the entire grid for the 2025 Spa 24 Hours... because Good Smile Racing's liveries never fail to impress. As is customary at SPA, this livery features a predominant red color.

Decal sheet that allows you to build any of the two bikes used by the official Yamaha team during the 2001 500cc World Championship season, including the special version with the number #30 to commemorate Biaggi's birthday. The logos of the tobacco sponsors are included on the decals.

Can a Liberty Walk-modded version of a Liberty Walk Nissan R35 GT-R Type 2 be made even more striking? Apparently, that's what the folks at Bape (Bathing Ape) thought when it came to decorating it, not hesitating to use a whole range of pink and red stains. Over the top? Maybe, but why not?

Decal sheet to reproduce the version of the Audi R8 LMS Evo II GT3 that the Uno Racing team used in the FIA GT World Cup held at the Macau circuit at the end of the 2024 season. The decal set includes some of the carbon patterns of the body parts and chrome decals.

Decal sheet reproducing the #98 version of the Rowe Racing BMW M4 GT3 that won the 2023 Spa 24 Hours, marking the team's third victory in the event, following the 2016 and 2020 races, both times with the BMW M6 GT3. The decal sheets include several carbon fiber patterns for various bodywork parts.

Decal sheet to reproduce the #46 BMW M4 GT3 version of Valentino Rossi's WRT team, which competed in the 2024 24 Hours of Le Mans. An edition where luck wasn't on their side, as they were forced to retire due to an accident early in the evening, when the race hadn't even reached its ninth hour. A very colorful and eye-catching version, which also includes several carbon fiber patterns for various body parts.

New Hasegawa molds allow you to reproduce in perfect detail the final version of the Mazda Savanna RX-7 SA22C Turbo, launched in 1983.

Limited edition of Hasegawa's kit of the first model in the Celica series, the 1600 GT, in a version that includes some of the components used in the competition models, such as the wheel arches, the front spoiler, and the rear spoiler.

A new version of Hasegawa's fantastic kit of the Group A Nissan R32 GT-R that dominated the Japanese Touring Car Championship, better known as the JTCC, with an iron fist. This version allows you to reproduce the car that won the ninth and final round of the 1993 season, held at the end of October at Fuji Speedway.

A superbly detailed Hasegawa model kit that allows you to reproduce the Honda NSR500 used by Shinichi Ito in the 1989 All-Japan 500cc Motorcycle Championship, where he finished second overall. This limited edition kit features the extensive parts list and detail found in other Hasegawa references of this kit.

A new reference of Hasegawa's classic Group B Lancia 037 kit. In this case, the chosen version is the Duriforte team unit with which Carlos Bica, four-time Portuguese Rally Champion between 1988 and 1991, participated in the 1986 Vinho de Madeira Rally, where he finished in fifth place. This limited edition features a photo-etched sheet with elements such as the brake discs, grilles, and windshield wipers. The rims included in the kit do not correspond to those shown in the photo of the actual model on the box.

Set of three figures depicting three French police officers in different positions, including a seated position that allows them to be placed inside a vehicle. This item includes only the parts to assemble the three figures. The standing figures are approximately 78,5 mm tall. Vehicle kit not included.

Set of three figures depicting three farmers in different positions, including a seated position that allows them to be placed inside a vehicle, such as a tractor. This item includes only the parts to assemble the three figures. Vehicle kit not included. The standing figures are approximately 78.7 mm tall.

Set of three figures depicting three firefighters in different positions, including one climbing a ladder. This item includes only the parts to assemble the three figures. The standing figures are approximately 78,6 mm tall.

Set of two figures that represent two occupants riding in a vehicle, both seated, with one of them in the driving position. The pieces are made of injected plastic.

Simple transkit to reproduce, based on the Belkits kit, the successful Skoda Fabia S2000 in its international debut race, the 2009 Monte Carlo Rally, where Jan Kopecky, accompanied by Petr Starý, managed to take the Czech car to a fourth place finish. This reference includes the same parts as the REJI-169 reference from the same manufacturer, but without the photo-etched plate.

Simple transkit to reproduce, based on the Belkits kit, the Skoda Fabia S2000 with which Juho Hänninen Juho and Mikko Markkula participated in the 2009 Rally of Finland, finishing in tenth position behind all the WRC vehicles, but first among the S2000s. The transkit includes resin parts to replace the entire front of the car and reproduce the shapes of the 2009 model, with headlights, front grille and air intakes different from those of the base kit.

Developed by Luca Cavicchi, the Group A version of the Renault Clio is once again available from Arena Modelli in 1/24 scale, also maintaining one of its most spectacular features, which is its spectacular reproduction of its mechanics under the front hood. The version reproduced in this reference is that of the official silver-coloured Renault Sport Williams with which the always acrobatic Jean Ragnotti, accompanied on his right by Gilles Thimonier, managed to finish in tenth position in the 1994 Monte-Carlo Automobile Rally, although a subsequent penalty caused them to fall in the final classification to thirteenth place.

Developed by Luca Cavicchi, the Group A version of the Renault Clio is once again available from Arena Modelli in 1/24 scale, while still maintaining one of its most spectacular features, which is its spectacular reproduction of its mechanics with the front bonnet lowered. The version reproduced in this reference is the official silver Renault Sport version with which the legendary Jean Ragnotti, accompanied on his right by Gilles Thimonier, managed to finish in ninth position in the 1992 Tour de Corse Rally.

This resin kit allows you to choose between the two Group 4 Porsche 911SC Almeras with their distinctive Esso livery that participated in the 1982 Monte-Carlo Rally. The car with the number #8, driven by Jean-Luc Thérier and Michel Vial, achieved the best result, achieving third place, while the car with the number #4, driven by Guy Fréquelin and Jean-François Fauchille, finished immediately behind. A very complete kit, which includes the option of assembling the engine, which is accessible once the model is completed.

A set of 3D-printed parts that will allow you to enhance the detail of your Tamiya Audi Quattro kit. The parts include the complete front grille with all four headlights, the Audi emblem rings, making them easy to paint, and the door handles, all with incredible definition.

Now that Tamiya has released the 992.1 generation Porsche 911 GT3RS model kit, Kitbox PZY Model has decided to pay tribute to its predecessor by developing the kit so that you can also reproduce the 991.2 generation Porsche 911 GT2RS in scale. A kit that, at the time of its launch in 2018, redefined the performance limits of its most iconic model. This kit is made of high-quality resin, to which we must add an extensive sheet of photo-etched parts and a complete decal sheet. Simply spectacular!

Complete set of 3D-printed connectors to reproduce the pneumatic air circuits found in 1/24-25 scale trucks. The set includes four types of connectors (straight, T, 45-degree elbow, and 90-degree elbow) and three sizes (0.6, 0.8, and 1 mm). The largest number of parts in the set are the 0.8 mm size, as it is the most common and therefore the most suitable for realistic wiring detailing of your 1/24-1/25 scale truck models.

There's no excuse when it comes to detailing your Tamiya kit of the Alfa Romeo Giulia Sprint GTA. This reference includes a whole series of parts to reproduce the 1750 GT version, with a new complete front end and front hood, more interior parts, such as the seats, and a new dashboard with center tunnel console. Even the smallest details are captured thanks to the large number of 3D-printed parts. Truly impressive!

New edition of the US American Superliner. Inside the box, you'll find the usual Italeri parts list, with new decals, rubber tires, and a multitude of parts so you can assemble the model with maximum detail. Once assembled, the model measures 35 cm in length.

New edition of Italeri's Volvo VN 780 kit. Inside the box, you'll find the usual Italeri parts list, with new decals, rubber tires, and a multitude of parts so you can assemble the model with maximum detail. Once assembled, the model measures 34.5 cm in length.

Small white metal parts for recreating the pin locks used in rally cars and GTs hoods.

Set of 4 rims with the design of the 13-inch PLS rims. The outer ring of the rim is made of turned aluminium, while the core of the rim is made using 3D printing. The diameter of the rims is approximately 15,5 mm. This reference DOES NOT include tires.

The set contains the following parts: 4 Wheel rings 4 Wheel inserts (plastic), central wheel hub nuts, Optional: 4 Tires (slicks or tread)

Set of four 19" rims, like the ones used in the late Porsche Turbo. The set featured four metallic rings and resin rim centers. Tyres are NOT included.

Set of two door handles made of white metal, imitating the design of those used by the Porsche 911.