Newsletter 670: Little peopleJuly 3^rd, 2025

Set of three figures depicting three farmers in different positions, including a seated position that allows them to be placed inside a vehicle, such as a tractor. This item includes only the parts to assemble the three figures. Vehicle kit not included. The standing figures are approximately 78.7 mm tall.

Set of three figures depicting three firefighters in different positions, including one climbing a ladder. This item includes only the parts to assemble the three figures. The standing figures are approximately 78,6 mm tall.

Set of three figures depicting three road workers in different positions. This item includes only the parts to assemble the three figures. The standing figures are approximately 77,8 mm tall.

Set of two figures, allowing you to recreate two stockers transporting old gasoline cans or loading a truck. In addition to the figures, several gasoline cans are also included. The pieces are made of injected plastic.

Set of three figures that allow you to play three female mechanics in a position to repair a classic vehicle. The pieces are made of injected plastic.

A set of two figures that represent two firefighters riding in a vehicle, one of them seated in the driver's position. The pieces are made of injected plastic.

Set of two figures that represent two occupants riding in a vehicle, both seated, with one of them in the driving position. The pieces are made of injected plastic.

Set of two figures that allow you to recreate two occupants riding in a vintage sports car, both seated, with one of them in the driving position. The pieces are made of injected plastic.

1/24 scale rims and tires set for the Nunu BMW M4 GT3 kit. At Decalcas, they know you're looking to enhance the look of your models, so why not add this faithful reproduction of the BBS rims fitted to the BMW M4 GT3 and the correct size tires, thus improving the overall look of your model? Made in 3D resin with Decalcas' usual print quality and impressive fit and detail. We recommend using this product together with the Decalcas reference DCL-PAR175 - Brake discs.

1/24 scale rims and tires set for the Nunu BMW M4 GT3 kit. At Decalcas, they know you're looking to enhance the look of your models, so why not add this faithful reproduction of the Rimstock rims fitted to the BMW M4 GT3 and the correct size tires, thus improving the overall look of your model? Made in 3D resin with Decalcas' usual print quality and impressive fit and detail. We recommend using this product together with the Decalcas reference DCL-PAR175 - Brake discs.

At Decalcas, they know you're always looking to improve the detailing of your models, and as a perfect complement to the DCL-PAR176 rim set, they've also designed brake discs and calipers to match. That's why they've developed the AP Racing braking system, used on the BMW M4 GT3 and numerous modern GT vehicles, in 1/24 scale. Made in 3D resin with the usual Decalcas print quality and impressive adjustments and level of detail.

Full decals sheet for decorating the Ferrari F2001 by Tamiya, including Marlboro sponsor logos.

After several years, Shunko Models has decided to reissue the decal sheet to complete the Peugeot 905 Evo1. The decal design for the Le Mans versions is maintained, since at the time they were already revised and improved with respect to those included in the Heller or Airfix kits, but this reissue also includes additional decals that allow to reproduce the version of the race held at Silverstone in 1992, where Derek Warwick and Yannick Dalmas achieved a resounding victory.

This new Shunko Models reference has been designed to replace the decals of the Fujimi kit, although with a greatly improved design, where the shape and size of each decal is different from those on the kit's decal sheet. Also included are the logos not included in the original kit, as well as some replacement decals, such as the side numbers that are difficult to apply.

This new Shunko Models reference has been designed to replace the decals of the Fujimi kit, although with a greatly improved design, where the shape and size of each decal is different from those on the kit's decal sheet. Also included are the tobacco logos, some spare decals, as well as the numbers and decals to also make the unit with number #2, which is not included in the original kit's decal sheet, and which also obtained the best position in the race with her third place.

This high quality display case has been specially designed to display and protect your Pocher 1/8 scale models. The showcase cover is made of highly transparent 5 mm thick acrylic material, and is provided with a black wooden base which is fully velvet flocked. The measurements of the showcase are 643 x 308 x 205 mm, with a total weight of 6.5 kg. The nameplate is not included with the display case, but is included with the Pocher kit itself.

Complete decal sheet that will allow you to correctly reproduce, using the Tamiya kit of the Renault R5 Turbo as a base, any of the units that Jean Ragnotti used to participate in the Monte-Carlo Rally, where he won, and the RAC of England, where he got fifth position, both in the 1981 season. Unlike what happens with the Tamiya kit, the decal section for the Monte-Carlo version does include the rally plates or the decal with the starting town, Paris, which must be duplicated on the roof of the car. In addition, the set includes as resin pieces a new steering wheel and a pair of exterior rear-view mirrors that are more in line with the real ones.

Set of two exterior mirrors, left and right, with the conical design used in the Renault R5 Turbo, plus the steering wheel used in the competition version, to replace the parts that come in the Tamiya kit.

Decal sheet to reproduce the Simon Clarr Racing team's version of the Opel Acona 400 during its participation in the 1982 Tour de Corse Rally. The team had to retire due to a suspension problem.

The re-edition of Heller's Citroën C4 WRC kit has been great news, but now it's time to decide how to "dress" it in its wartime colours. This decal sheet, designed by Reji, reproduces the livery used by the Citroën team during its first season in the World Championship, on the German and Irish Rally Championships, both held on asphalt. The winner of both events was, once again, Sebastian Loeb, who proved unstoppable in 2007, becoming World Champion for the fourth time.

A Grey Filler/ Putty for Models in a huge 180g tube has been added to our range of products. It is a fine grade model filler which can be sanded, filed and painted once dry. Fills hairline cracks and gaps between plastic parts. The product can be sanded when fully dry using a fine grade of sandpaper and then painted. Directly onto substrate without excessive application of product. If gaps are deep, two thin coats are preferable to one thick coat. Surface dry in 15mins. Sandable in 20mins at 20 degree C. Drying times will vary according to ambient temperature and humidity. Excess filler should be wiped away with a damp cloth. Product is permanent once dry.

Pre-diluted satin finish varnish supplied in a 30ml bottle and ready to use with your airbrush. Allow the base paint to dry for at least 30 minutes before applying this varnish. Apply a thin coat, allow to dry for 5-10 minutes, and apply successive thicker coats (at least two more are recommended) allowing 5-10 minutes drying time between coats. Touch dry in 1 hour, and full hardness after 24 hours. Wait at least 48 hours to polish. If applying over decals, always apply at least a couple of thin coats. NEVER apply wet coats of varnish directly onto decals, as this could damage the decals.

With the proven quality of Tamiya products, this kit allows you to assemble the Yamaha YZF-R1 super sports bike, which was presented at the Milan Show in 1997. The kit faithfully reproduces the sculptural lines of the real bike, as well as the mechanical parts, chassis and suspensions. As usual with Tamiya, various cables and vinyl pipes are included to reproduce the cooling or brake circuits. Among the parts are those necessary to be able to assemble a stand to hold the bike, as well as a rear tail cover to assemble the version without a rear seat.

Limited-time re-edition of the 1/12 scale kit of one of the most aggressive bikes of the 80s, the Suzuki Katana GSX 1100S, with innovations that are still seen today in the most modern motorcycles. With countless parts, you will enjoy assembling all its mechanical parts, very grateful for the smallest detail since, once assembled, almost everything will be visible. Who's up for it?

Launched in 2006, the Kawasaki ZZR1400 was intended to be the fastest production motorcycle in the world. To achieve this, it was equipped with a 1.352 cc inline 4-cylinder engine capable of generating up to 190 hp. Its design was unique, with a front fairing with six lights and black side grilles that extend along the fairing. All its features have been faithfully reproduced in this Tamiya kit, which once assembled has a total length of 180 mm. The kit allows you to choose between three specifications to build: North America, Europe or Malaysia. It has metal transfers for most of the emblems and for the rearview mirror lenses.

Set of rubber tires for 15-inch rims. Ideal for use with 15-inch USCP rims, although they can be fitted to rims from other manufacturers. The tires measure 27 mm in outer diameter, 17 mm in inner diameter, and 10 mm in width.

Often, the reason we decide to make a model is the memories it evokes... a corner where we saw it skidding as a child, summer trips inside it, our father's or uncle's car... and why not that pedal model in which we began to dream of becoming great drivers and world champions? This USCP reference faithfully reproduces the Murray Torpedo children's pedal car at 1/24 scale. What memories!

Decal sheet with the logos that can be found painted on some intercoolers, such as those of Greddy, EGS, AMS, Blitz, HKS, MM or Yamamotoworks.

3D printed brake system, consisting of 4 discs and 4 brake calipers, designed to improve the brakes of the Tamiya Nissan 240Z kit. This set allows you to replace the rear drum brakes with disc brakes, as well as mount larger front brakes, just as you would do to improve the real model. The brakes are mounted without the need to modify any part of the kit, and are designed to be able to mount the kit's wheels. Decals are also included in case you want to "decorate" the body of your model with Wilwood logos.

Although the acronym JDM stands for "Japanese Domestic Market," meaning products specifically for the Japanese market, in the automotive and tuning world, it's also associated with the preparations carried out in the land of the rising sun. This decal sheet includes logos that can be found on the bodies of some of these models, such as Greddy, Bride, Option Drift, Blitz, Wildwood, Sparco, Night Runners, Relax, Dori-Style, Good Vibes, V-opt.co.jp, and Yamamotoworks.

Transkit to convert the Tyrrell P34 Tamiya kit into the version with which Jody Scheckter achieved fourth position in the 1976 Belgian Formula 1 Grand Prix held in SPA, while his teammate Patrick Depailler had to abandon due to transmission problems when fighting for the podium. The transkit includes resin parts for the engine cover, cockpit and rear wing, white metal parts for the mechanical parts, two complete photo-etched plates plus an extra one to use as a template to paint the Goodyear logos on the tires, and a sheet of decals.

Transkit to convert the Tamiya kit of the Tyrrell P34 into the version as it participated in the qualifying session of the 1976 Spanish Grand Prix held at the Jarama circuit, where Patrick Depailler achieved a creditable third place on the grid. The transkit includes resin parts for the engine cover with the side pontoons and the cockpit, white metal parts for the mechanical parts, two complete photo-etched plates plus an extra one to use as a template to paint the Goodyear logos on the tires, and a sheet of decals.

The Lotus 23 was designed by Colin Chapman to compete in small-displacement categories, taking advantage of its low weight and excellent handling to surprise rivals with much more powerful engines. This high-quality resin kit lets you choose from six different versions of the Lotus 23, some driven by such charismatic drivers as Jim Clark, and which obtained important victories in events such as the Australian Tourist Trophy or the 3 Hours Autosport at Snetterton, both in 1963. The kit includes photo-etched parts and white metal parts, so you can assemble the version of your choice with great detail.

Transkit to recreate in great detail the single-seater that put the legendary Tyrrell team back on the podium, the 019. This single-seater was characterized by its high nose, which was nicknamed the "dolphin nose". In his debut at the San Marino Grand Prix, Jean Alesi scored points, reaching sixth place. Based on the Tamiya kit of the Jordan 191, of which mainly the wheels and mechanical part are used, the transkit includes elements such as the complete floor and bodywork, the front and rear spoilers, the seat and the suspension arms, as well as including the complete decal sheet and a complete plate of photo-etched parts.

Transkit to recreate in great detail the single-seater that put the legendary Tyrrell team back on the podium, the 019. This single-seater was characterized by its high nose, which was nicknamed the "dolphin nose". At the Monaco Grand Prix, in only his second race, Jean Alesi managed to get on the podium, with a superb second place. At the Japanese Grand Prix, Satoru Nakajima managed to finish in sixth place. Based on the Tamiya kit of the Jordan 191, of which mainly the wheels and mechanical part are used, the transkit includes elements such as the complete floor and bodywork, the front and rear spoilers, the seat and the suspension arms, as well as including the complete decal sheet and a complete plate of photo-etched parts.