Newsletter 666: Fewer clothesJune 5^th, 2025

This is a low cost edition of Nunu's E90 BMW 320si kit, which is priced lower by NOT including the box or decal sheet. Ideal for those who want to build the model with one of the alternative liveries.

This is a low cost edition of Nunu's Audi R8 LMS GT3 kit, which is priced lower by NOT including the box or decal sheet. Ideal for those who want to build the model with one of the many alternative liveries.

This is a low cost edition of Nunu's Audi A4 Quattro kit, which is priced lower by NOT including the box or decal sheet. Ideal for those who want to build the model with one of the many alternative liveries.

This is a low cost edition of Nunu's BMW M3 E30 kit, which is priced lower by NOT including the box or decal sheet. Ideal for those who want to build the model with one of the many alternative liveries.

This is a low cost edition of Nunu's Volvo S40 kit, which is priced lower by NOT including the box or decal sheet. Ideal for those who want to build the model with one of the many alternative liveries.

New installment of Komakai's Fast Guides series, with a publication full of exquisite photographs that cover in great detail the spectacular Lancia Super Delta HF Integrale. Includes 32 full color pages with detailed images of the interior, exterior, wheels, etc...

The R5 Turbo seats were characterized by their carefully designed design to enhance lateral support for the occupants, with prominent, enveloping side cushions. When designing the Renault 5 Turbo kit, Tamiya included flatter seats to accommodate the driver's figure, thus losing the seats' spectacular appearance. This pair of resin seats has been designed to replace those in your Tamiya Renault R5 Turbo kit, but without the figure being assembled, achieving a much more realistic image of the interior. In this reference, the fabric texture in the central part of the seat is smooth.

The R5 Turbo seats were characterized by their carefully designed design to enhance lateral support for the occupants, with prominent, enveloping side cushions. When designing the Renault 5 Turbo kit, Tamiya included flatter seats to accommodate the driver's figure, thus losing the seats' spectacular appearance. This pair of resin seats has been designed to replace those in your Tamiya Renault R5 Turbo kit, but without having to assemble the figure, achieving a much more realistic image of the interior. In this reference, the central part of the seat highlights the texture of the fabric.

Decal sheet for use on the Bandai kit of the Honda DT125 Super Trail.

Decal sheet designed to reproduce the bikes that the Aspar team put on track for its two riders during the Moto GP United States Grand Prix held at the Circuit of the Americas in Austin, Texas, in April 2015.

The 1986 United States Grand Prix, held on the Detroit street circuit, saw a curious novelty on the sidewalls of the tires of the Benetton team cars... and that was that each of them was painted in different colours to match those of its main sponsor, "United Colours of Benetton. Tameo Kits, with the usual quality of its products, has developed the scale kit of this model, carefully reproducing the shapes of the single-seater. The kit is complemented with an extensive sheet of photo-etched parts to provide it with maximum detail and the corresponding decals.

Decal sheet to recreate the Group A version of the Subaru Impreza WRX with which Bruno Thiry achieved second place in the 1997 Ypres Westhoek Rally, in a fierce battle with another of Belgium's most famous drivers, Freddy Loix, who was only seven seconds ahead. A beautiful livery for use on Hasegawa kits, which feature tobacco logos.

Decal sheet to recreate the Group A version of the Toyota Celica ST185 with which Jari-Matti Latvala achieved victory at the 2025 Šmucler Historic Vltava Rally. A beautiful livery with colours similar to those used by the Yaris WRC in the World Championship. The decals have been developed to fit Tamiya and Hasegawa kits.

Within the Honda range, below the powerful NSX, there is a coupe model with less sporty pretensions, the Prelude. Tamiya's next release will allow this model to be reproduced, and with a curious feature: it is configured to open the rear hatch, revealing the trunk... and to top it all off, among the parts you will find up to three different types of suitcases and travel bags. The kit also includes masks for painting the windows and metal transfers.

Introducing the next Belkits release, the Toyota Yaris GR Hybrid Rally1. This new model allows you to reproduce the version that participated in the 2023 Rally Guanajuato Mexico, where Sébastien Ogier and Vincent Landais achieved victory. As is customary with Belkits, inside the enormous box you'll find a host of parts to reproduce the vehicle's interior, transmission, and underbody in great detail. It includes paint masks for the window frames and some photo-etched parts such as the hood latches and brake discs. More details to come soon.

This livery, used by the GruppeM Racing team at the recent 2025 Bathurst 12 Hours, has not left anyone indifferent, with a format reminiscent of the old "test card". Starting from third position, he was unable to finish the race after an accident on lap 170. This decal sheet is designed to be used with the Tamiya kit, and in combination with the transkit for the Evo version developed by LB Production.

Birthdays are meant to be celebrated, and if it's a round number like 130, even more so... and to top it all off, celebrate in style by achieving victory, and doing so with victory. Yes, Maro Engel took advantage of a collision between Antonio Fuoco and Raffaele Marciello on lap 15 of the main race to win the FIA GT World Cup held in Macau for the second time, but as they say, you have to be there. This decal sheet allows you to reproduce this livery and is designed for use with the Tamiya model kit in combination with the Evo version transkit developed by LB Production.

Decal sheet to make the version of the Group A Ford Escort Cosworth with which Jan Trajbold Jr. co-driven by Pavlína Trajboldová achieved fifth final position in the Sumava Mogul Rally in 1999... just ahead of his father, aboard another similar vehicle.

Complete decal sheet that will allow you to transform the Tamiya Renault R5 Turbo kit into the unit with which Jean Ragnotti, accompanied by Jean-Marc Andrié, participated in the 1980 Tour de Corse Rally, where he had to retire after suffering problems with the alternator. The set includes, as resin parts, a new steering wheel and a pair of exterior rear-view mirrors that are more in line with the real ones.

Set of five 15-inch OZ rims, as used on the Citroen C4 WRC during gravel events. The set includes gravel tires and complete brake discs, which are smaller to fit inside the rim.

Set of 9 fuel caps similar to those used in the Porsche 917 tanks, characterized by having a small handle that serves both to tighten or loosen the cap, as well as to remove it when refuelling.

Special "detail-up" edition of Hasegawa's kit of the Nissan Skyline 2000GT-R. This edition includes photo-etched parts with a multitude of details, such as the various body emblems, door locks, windshield wipers, front grille, and license plates, allowing you to enhance the model's finish. The exhaust pipes are also included as turned metal parts. A true classic that started the Skyline GT-R saga!

A new reference of the classic Hasegawa kit with a new livery, matching the two Subaru Italia units that competed in the 1993 Bettega Memorial, and with which Colin McRae won with the number 1. The parts list does not change with respect to other references of the kit, and as a nice touch, the rims do not match the five-spoke Speedline rims shown in the box photo.

To mark its 40th anniversary, Rover launched a special commemorative version, of which only 250 units were built for the UK market. This special edition of the Mini featured a full leather interior, rally-style headlights, 13-inch Sports Pack alloy wheels, and a brushed aluminium dashboard, topped with a magnolia-coloured instrument panel. Hasegawa also produced a limited edition of its Mini Cooper kit, which includes the special commemorative emblem mounted on the front hood.

Hasegawa includes new parts in this reference to make the conventional version of the Honda XLR250R, launched in 1985. Unlike the "Baja" version, it featured a single headlight integrated into a small protective fairing, and a small storage bag behind the seat, above the rear fender. The decoration and logos also changed compared to the Baja version. The kit, developed from scratch by Hasegawa with new molds after a detailed study of the real model, allows for a reproduction of the 1991 version, which incorporated a more advanced suspension system.

Spectacular set of 3D printed parts to detail the headlights of your Tamiya Porsche 911 992 GT3 RS kit... and switch on them like the real car! The set not only includes the necessary parts to detail the inside of the kit's headlights, but they are also designed to let the light through from the included LED lighting system, allowing you to turn the lights on and off just like on the real car. Who can resist "lighting up" the display case?

Studio27 reissues its photo-etched plate to detail the Tamiya references of the McLaren Honda MP4/7 at 1/20 scale, with elements as interesting as the lateral planes of the rear wing, the covers of the air inlets of the sidepods, the different radiators, and even the engine exhaust manifold gaskets. Are you also wanting to get one?

Studio27 reissues its photo-etched plate to detail the Tamiya references of the McLaren Honda MP4/8 at 1/20 scale, with elements as interesting as different configurations for the side planes for the rear spoiler, the air inlet covers of the sidepods, the brake disc cores, the radiators, and even the suspension system anchors.

Limited time re-edition of these photo-etched parts designed for the 1977 version of the Tyrrell Ford P34 from Tamiya in 1/20 scale. The photo-etched plate includes such interesting elements as the radiators, two different configurations of the rear wing planes, the chassis structure under the cockpit dome, the brake discs, and many more details to give a high degree of realism to your model. Do not stay without them!!

Silver cable and connectors set for reproducing the pipes, pipes, and hydraulic or pneumatic connections found in your scale models. The silver cable is made of metallic-textured fiber, while the connectors are 3D printed. This item includes approximately 1 meter of cable and connectors designed to make pipes with an approximate diameter of 2 mm.

Silver cable and connectors set for reproducing the pipes, pipes, and hydraulic or pneumatic connections found in your scale models. The silver cable is made of metallic-textured fiber, while the connectors are 3D printed. This item includes approximately 1 meter of cable and connectors designed to make pipes with an approximate diameter of 1.5 mm.

Silver cable and connectors set for reproducing the pipes, pipes, and hydraulic or pneumatic connections found in your scale models. The silver cable is made of metallic-textured fiber, while the connectors are 3D printed. This item includes approximately 1 meter of cable and connectors designed to make pipes with an approximate diameter of 0.8 mm.

Silver cable and connectors set for reproducing the pipes, pipes, and hydraulic or pneumatic connections found in your scale models. The silver cable is made of metallic-textured fiber, while the connectors are 3D printed. This item includes approximately 1 meter of cable and connectors designed to make pipes with an approximate diameter of 0.6 mm.

Rubber made rain tyres, perfect for your MotoGP scale models in 1/12 scale. Front tire measures 48mm outer diameter, 36mm inner diameter, and 10,5mm wide. Rear tire measures 52,5mm outer diameter, 36mm inner diameter, and 15,8mm wide.

Rubber made rain tyres, perfect for your MotoGP scale models in 1/12 scale. Front tire measures 49mm outer diameter, 36mm inner diameter, and 10mm wide. Rear tire measures 52mm outer diameter, 35mm inner diameter, and 16,5mm wide.

Decal sheet designed to replace the original decal sheet for Hasegawa's 1/24 scale Ferrari 641/2 kit, correcting several of the errors in the original decal for the model and including decals with tobacco advertising.

Ferrari 310B livery for replacing or updating the decals on the Tamiya kit. The decal sheet includes tobacco advertising.

New decal sheet for the 1/12 scale kit of the McLaren TAG Porsche MP4/2C, originally released by Protar and recently reissued by Italeri. This decal sheet complements the original decal sheet for the kit, which is still required to complete the model. These decals correct several errors in the logos on the original decals and also include the decals necessary to recreate the special livery of the car driven by Keke Rosberg with the number 2, which, sporting a striking yellow color, was only used at the 1986 Portuguese Grand Prix.

Decal sheet that allows you to reproduce the Group C Porsche 962C that, with race number 11, participated in the first round of the 1987 World Sports Car Championship, held at the Jarama circuit. This event was also known as the 1987 Fortuna Grand Prix. Driven by Emilio de Villota and Paco Romero, the Porsche driven by Kremer managed to finish the race in tenth place. The decal, printed by Cartograf, was developed for use on the Tamiya model kit.