Newsletter 665: Where, when, how much...May 29^th, 2025

Complete set of trip meters, radios and timers, covering the most common models from the 1960s and 1970s to the present day. Designed to delight all rally and raid enthusiasts, and to provide maximum detail on the communications, distance, and time measurement aspects of your models' cockpits.

Complete set of trip meters, radios and timers, covering the most common models from the 1960s and 1970s to the present day. Designed to delight all rally and raid enthusiasts, and to provide maximum detail on the communications, distance, and time measurement aspects of your models' cockpits.

Complete set of trip meters, radios and timers, covering the most common models from the 1960s and 1970s to the present day. Designed to delight all rally and raid enthusiasts, and to provide maximum detail on the communications, distance, and time measurement aspects of your models' cockpits.

Decal sheet to reproduce the version of the Renault 5 Turbo Group 4 that obtained fourth position in the 1980 Tour de Corse. To be used on the Tamiya kit base.

Decal sheet with series of numbers from 0 to 9 in two designs, available in black and white. There are four series of each type of digit in both colours. The numbers are approximately 14 mm and 17 mm high, depending on the design.

Decal sheet with series of numbers from 0 to 9, featuring eight different designs, in black and white. There are two series of each type of digit in two different colours. The numbers are approximately 5mm to 8mm tall, depending on the design.

Decal sheet with round white numbers in diameters ranging from 20 to 30mm (20, 21, 22, 23, 24, 25, 28, and 30mm). Depending on the size, there are 4 or 6 units of each circle size. Ideal for combining with the LB-NUM1L reference number series from the same manufacturer.

Decal sheet with round white numbers ranging in diameter from 8 to 19mm. Depending on the size, there are between 7 and 14 units of each circle size. Ideal for combining with the LB-NUM1S reference number series from the same manufacturer.

Finally, a kit that allows you to reproduce one of the icons of supersports, the Ninja ZX-10R. The kit accurately reproduces its aerodynamic design. Its 998cc liquid-cooled inline four-stroke engine is also accurately replicated, as is the twin-spar frame that balances strength and lightness, and the inverted front fork. The forged rims have also been reproduced in great detail, and the front and rear shock absorbers, as well as the steering damper, are movable. The kit includes seats and tires made of soft vinyl, which realistically reproduce the texture of the real parts. The stainless steel brake discs are not only highly detailed but also offer a texture similar to the authentic. The mirrors and Kawasaki emblem have been recreated with transferable metallic stickers, offering realistic details. The kit allows you to complete three different paint schemes, with a high-quality decal sheet.

There are models that are very recognizable just because of their decoration, and beyond their results on the track. Who hasn't seen or heard of the green Porsche with the dinosaur decoration? This is precisely the decoration that allows us to complete this decal sheet, in the version that participated, completing the event, in the 24 Hours of Le Mans in 2023. To complete the correct model, in addition to the Nunu kit of the Porsche 911 991 GT3 RSR, the ZoomOn brand transkit reference Z187 is needed to convert it into the Porsche 911.2 RSR 2020.

Perhaps one of the most striking and followed cars of the Alfa Romeo fleet in the DTM. The Alfa Romeo 155 V6 Ti of the Schübel Engineering team was painted in one of the most recognizable and even legendary colours in the world of competition: Jagermeister orange. Now, it is possible to refresh the decals of the Tamiya kit, or even change the decoration if you have one of the references of the Alfa Corse team kit... and who can resist orange?

It's the perfect time to get a fresh set of decals for your Alfa Romeo 155 kit, in this case the Bosch version that competed in the ITC in 1996, the international version of the DTM, an attempt to turn it into something similar to a World Championship with more races outside Germany. The best results for the team and its driver, Jason Watt, were in the race held at Silverstone, where he managed to get on the podium in third position in the second race.

In the 1996 season, the Alfa Corse team continued to be sponsored by Martini, although the stripe scheme was changed with straighter lines than those used in the previous season. Shunko gives us the option of renewing the set of decals for our kit, with this complete set to make any of the two units that the Alfa Corse team used in the ITC. The team's best results were obtained by Alessandro Nannini, with up to 7 race wins, fighting for the Championship until the last race, although he had to settle for third place.

Not happy with releasing a version based on the Lamborghini Aventador, extreme tuning specialist Liberty Works has included a second version with a few changes, the easiest to identify being the rear wing with its supports located at the front and anchoring it by its upper part. This and other small changes can make it difficult to use the different decals available to customize your Aoshima kit, so SK Decals has decided to offer the same decorations for version 1 of the Aventador revised to fit perfectly on version 2. This decoration called Zero Fighter pays tribute to the brave Japanese fighter pilots aboard the famous Mitsubishi A6M Zero (be careful, we are talking about planes), adapting its colours to those of the car with the characteristic red circle of the Japanese flag.

Not happy with releasing a version based on the Lamborghini Aventador, extreme tuning specialist Liberty Works has included a second version with a few changes, the easiest to identify being the rear wing with its supports located in front and anchoring it by its upper part. This and other small changes can make it difficult to use the different decals available to customize your Aoshima kit, so SK Decals has decided to offer its decorations for version 1 of the Aventador revised to fit perfectly on version 2. This decoration uses the logos of one of the most famous energy drink brands in the world and with a strong presence in the world of competition and risk sports. You almost certainly know which brand we are talking about, right?

Not happy with releasing a version based on the Lamborghini Aventador, extreme tuning specialist Liberty Works has included a second version with a few changes, the easiest to identify being the rear wing with its supports located in front and anchoring it by its upper part. This and other small changes can make it difficult to use the different decals available to customize your Aoshima kit, so SK Decals has decided to offer its decorations for version 1 of the Aventador revised to fit perfectly on version 2. This livery is based on another of the most recognizable color schemes wherever you are, the Martini one.

Not happy with releasing a version based on the Lamborghini Aventador, extreme tuning specialist Liberty Works has included a second version with a few changes, the easiest to identify being the rear wing with its supports located in front and anchoring it by its upper part. In addition to the adaptations of some of the liveries of the Aventador LB version 1, SK Decals has also developed some new versions specific to version 2, such as this one from Aape with a striking combination of lines on the bodywork. And to complete the transformation, the correct resin front hood is included. It looks great!

For the 2019 Spa 24 Hours race, part of the Blancpain GT Series Endurance Cup and the Intercontinental GT Challenge Championship, the Mercedes-AMG Black Falcon team sported a livery very much in the style of those seen with the Good Smile team, which was actually one of the sponsors, but the theme was the premiere of the anime film Promare. Perhaps the livery brought them some luck, because they managed to finish the race in third place.

Just presented and even without having raced yet, it is already possible to build the 2025 version of the Mercedes AMG GT3 Evo that the Good Smile Racing team will use in its participation in the Autobacs Super GT.

Decal sheet reproducing the #10 Audi R8 LMS Evo II GT3 version used by the Uno Racing team in the FIA GT World Cup held at the Macau circuit at the end of the 2024 season. A very striking version thanks to its purple and black combination. The decal set includes some of the carbon patterns used on the bodywork parts.

Decal sheet to reproduce the Cliff version of the Opel Calibra V6 4X4 with which former Finnish Formula 1 driver Jyrki Juhani Järvilehto began his career in the German DTM Championship, after competing in his final F1 season in 1994 with the Benetton and Sauber teams. The decals have been developed for use on the Tamiya model kit.

Italeri has recently almost completely revamped its Volvo FH reference, using new moulds to reproduce the low-roof version. This new reference takes advantage of this recent renovation, and incorporates new parts. However, it maintains the main features of the kit, with the new cab and its fully detailed interior, as well as the engine and the frame, and allowing you to choose whether the driver's door or the front radiator grille are open or closed.

Complete transkit to make, based on the Porsche 934 Tamiya kit, the impressive Porsche 935 that achieved second position in the Zolder race belonging to the 1977 German DRM Championship. The transkit includes several resin parts, among which is the complete body, with its corresponding rear wing and front spoiler separately, 3 photo-etched plates, one of them for the precious honeycomb cores for the BBS rims, a high-quality decal sheet and different white metal parts, among which there are 4 wheel rims and two 5-spoke rear wheels, with their corresponding rubber tires. Spectacular!

If you're keen to further enhance the detailing of the Tamiya Porsche 911 992 GT3 RS kit, don't miss this reference with a complete photo-etched sheet.

Complete decal sheet to reproduce the livery of either of the two official Porsche 911 GT3 RSR units that participated in the 2019 24 Hours of Le Mans, where the car with the #91 registration number achieved second place in the GTE Pro category. The decals are designed to be used over the references of Nunu's kit of the Porsche 911 991 GT3 RSR.

Complete set of individual trailer air couplings, including two electrical plugs, two ABS plugs, two open sockets, and two closed sockets. Four color-coded cables (red, blue, black, and yellow) are included to complete the electrical installation.

Photo-etched sheet to reproduce and detail a pair of reduction hubs for DAF trucks. The parts are designed to fit the rims of older Italeri models, which have large diameter hubs.

Photo-etched sheet including the front grille and emblems for detailing AMT/Ertl kits of the GMC Astro. This reference reproduces the details of the models manufactured between 1978 and 1987.

Photo-etched sheet including the front grille and emblems for detailing AMT/Ertl kits of the GMC Chevrolet Titan. This reference reproduces the details of the models manufactured between 1978 and 1987.

Photo-etched sheet including the front grille and emblems for detailing AMT/Ertl kits of the GMC Chevrolet Titan. This reference reproduces the details of the models manufactured between 1968 and 1977.

Decal set reproducing various types of data and instructions plates found on all types of trucks and equipment.

Photo-etched parts reproduce the Kenworth CC series tractor radiator grille in detail. Also included is a complete and detailed dashboard with instrument cluster gauges.

Digital printed decals designed for use on the Finishers transkit, which allows the Tamiya kit of the Williams FW11 to be converted into the Arrows Megatron A10 of the 1987 season.

Digital printed decals designed to help convert the Tamiya Lotus 107B kit into the 1993 Minardi M193. The decal sheet includes several decal versions to recreate at least 8 different GP versions.

2017 saw the debut of the impressive and powerful barqueta, created by Marco Gramenzi, based on the design of the Alfa Romeo 4C. This 1/43 scale resin kit reproduces the vehicle that, in the hands of the creator himself, competed in the Trento Bondone Hill Climb in 2017.

Hill climb regulations have always allowed for the creation of highly sophisticated cars equipped with specific aerodynamic solutions. This 1/43 scale resin kit reproduces the spectacular Group 5 Alfa Romeo GTA 1600, driven by Ubaldo Smittarello, which competed in the Trento Bondone Hill Climb in 1976.

1/43 scale resin kit that allows you to choose between three versions of the Group 5 Alfa Romeo GTAm that driver Romano Bellina used in various hill climbs during the 1977 season.

Hillclimb racing regulations have always allowed for the creation of highly sophisticated cars equipped with specific aerodynamic solutions. This 1/43 scale resin kit allows you to choose between two of the Group 5 Alfa Romeo GT cars that participated in the Trento Bondone Hill Climb in 1976. The car with the number 274 is the GTAm 1300 driven by Mauro Sacchini, while the number 332 is the GTAm 2000 driven by Paolo Lara.

Assembled collector's model that reproduces the version of the BMW 2002 Tii with which Timo Mäkinen and Paul Easter participated in the 1969 Monte-Carlo Rallye Automobile, where they were forced to retire early due to a problem with the braking system.