Newsletter 662: Triple trio of acesMay 8^th, 2025

Following the rule change in the DRM regulations, driver Karl Oppitzhauser acquired one of the last units of the BMW 320 E21 Turbo, which he competed in all kinds of events, including some hill climbs. Its unusual white polka dot livery was undoubtedly eye-catching... almost as much as it will be on your kit. This livery allows for a reproduction of the car, already sponsored by Bauhaus, during its participation in the 1984 FIA Interserie European Cup support race held at the Erding circuit in Germany.

Although Hans-Joachim Stuck competed in the German DRM for most of the 1981 season aboard a BMW M1 Turbo, he was seen driving one of the Schnitzer team's BMW 320 E21 Turbos at the Hessen Cup held at Hockenheim. This decal sheet reproduces this car, with which the brave German driver achieved sixth place on the starting grid, although turbo boost pressure problems prevented him from completing the race.

Exquisite 1/43 scale kit that allows you to reproduce the Ferrari 312F1 with which Chris Amon participated in the 1969 Spanish Formula 1 Grand Prix, held on the Montjuïc street circuit. A kit with an extensive parts list, and that allows you to enjoy the assembly of the characteristic Ferrari V12 engine, with its exhausts in their particular light colour placed clearly in a high position on the sides.

After seeing the Lotus Ford Cosworth 72D reproduced in almost all scales, we were missing the 1/43 option. But now, it's finally going to be possible! Tameo Kits has just announced its development within its special series of Formula 1 World Champions... and the 1972 champion couldn't be missing from its catalogue.

We had been dreaming for a long time of being able to assemble the tremendous Audi Sport Quattro S1 E2 in plastic, and our dreams came true. The kit includes the decorations used by the official Audi team in the 1985 San Remo rallies, where Walter Röhrl achieved the only victory in the World Rally Championship for this car, and in Monte Carlo in 1986. A very complete kit, which also includes the auxiliary lights used in the night stages. Just one "but", the decals do not include tobacco advertising!, although that will not be a problem with the different sets available on our website to complete the sponsors.

FINALLY!!!!, the long-awaited plastic kit of the Lancia Delta S4. In addition to being a kit we all wished for, we were lucky enough to also get it with a detailed engine and interior, and a HUGE number of parts to make the assembly that it deserves. Essential for your shelf!!

Thanks to the collaboration with BBR, Arena Modelli is launching a series to reproduce different versions of the Ferrari 512 BB LM with a long tail. These kits, made of resin at a scale of 1/43, present some modifications with respect to the kits from which they are derived, with additional details both in the cockpit and, above all, in the engine area. The number of photo-etched parts has also been increased. This reference allows the production of the unit with chassis number #26685, the second of the units put on the track by the French importer Charles Pozzi in the 24 Hours of Le Mans in 1979. This unit, sponsored by 3M and with the number #63 on its doors, would not manage to finish the race after suffering an accident.

1/43 scale kit that allows you to build, in a completely open version, any of the three Audi Quattro Group B cars that topped the podium in the 1984 Monte Carlo Rally, with Walter Röhrl taking victory ahead of Stig Blomqvist and Hannu Mikkola. This reference allows for a fully open assembly, allowing you to open each of the doors, the front hood, revealing the 5-cylinder longitudinal front engine, and the rear hatch. It's hard to have more detail in less space!

Resin kit that will allow you to reproduce the second unit of the Porsche 911 Carrera RSR that the official Porsche team put on track for the 1973 edition of the 1973 24 Hours of Le Mans. Like the unit with number #46, it was equipped with the new aerodynamics with wide wedge-shaped rear fins that joined with the rear wing, so that practically the entire part of the car generated aerodynamic downforce. What it could not match was the final result, as it could not even complete the entire test, having to retire due to problems with the fuel supply system.

New installment of Komakai's Fast Guides series, with a publication full of exquisite photographs that cover in great detail the spectacular Lancia Super Delta HF Integrale. Includes 32 full color pages with detailed images of the interior, exterior, wheels, etc...

Photo-etched parts reproduce the Kenworth CC series tractor radiator grille in detail. Also included is a complete and detailed dashboard with instrument cluster gauges.

Complete set of 3D-printed connectors to reproduce the pneumatic air circuits found in 1/24-25 scale trucks. The set includes four types of connectors (straight, T, 45-degree elbow, and 90-degree elbow) and three sizes (0.6, 0.8, and 1 mm). The largest number of parts in the set are the 0.8 mm size, as it is the most common and therefore the most suitable for realistic wiring detailing of your 1/24-1/25 scale truck models.

Decal sheet to reproduce the version of the Mercedes AMG GT3 Evo that the GruppeM Racing Team used in the recent 2025 Bathurst 12 Hours. A livery with a format reminiscent of the old "test card." After achieving third place in timed practice, an accident on lap 170 prevented the car from crossing the finish line. This decal sheet is designed for use with the Tamiya kit, and as this is an Evo version, it is recommended to use a transkit such as the one developed by LB Production.

Decal sheet to reproduce the version of the Audi R8 LMS Evo II GT3 that the Uno Racing team used in the FIA GT World Cup held at the Macau circuit at the end of the 2024 season. The decal set includes some of the carbon patterns of the body parts and chrome decals.

Can a Liberty Walk-modded version of a Liberty Walk Nissan R35 GT-R Type 2 be made even more striking? Apparently, that's what the folks at Bape (Bathing Ape) thought when it came to decorating it, not hesitating to use a whole range of pink and red stains. Over the top? Maybe, but why not?

If you are one of those who like to detail your models, and you plan to assemble one of the numerous Hasegawa Porsche 962C kits, you will surely appreciate this detailing set launched by Studio27, which combines several photo-etched plates and white metal parts so that you have everything necessary. The set includes two photo-etched plates, which allow the creation of complete ventilated discs, and also white metal parts, including a set of 6-spoke wheels or brake calipers. This transkit is designed to be used on the different Hasegawa Porsche 962C references, and does not include decals.

Do you think your Porsche 962C Hasegawa kit needs a little more detail? Well, Studio27 has developed this detail up set that combines several photo-etched plates and white metal pieces so that you have everything you need to do it. The set includes three photo-etched plates, which allow you to make complete ventilated discs and include the beautiful golden cores of the BBS "honeycomb" rims, and also white metal parts, including a set of outer rings for the rims or brake calipers. This transkit is designed to be used on the different Hasegawa Porsche 962C references, and does not include decals.

Transkit to detail and reproduce the "works" version of the Porsche Rothmans team in some of its participations in the 1986 World Endurance Championship (WEC). Apart from the decal set with the tobacco logos (also available separately with the reference ST27-DC1164), two photo-etched plates and white metal parts are included, including a set of six-spoke wheels or the brake calipers. This transkit is designed to be used on the different Hasegawa Porsche 962C references.

Transkit to detail and reproduce the Porsche 962C sponsored by Leyton House in different events of the 1987 Japanese Sport Prototype Championship (JSPC). Apart from the decal set (also available separately with the reference ST27-DC1167), three photo-etched plates are included, which allow the creation of complete ventilated discs and include the beautiful golden cores of the BBS rims, and also white metal parts, including a set of outer rings for the rims or brake calipers. This transkit is designed to be used on the different references of the Hasegawa Porsche 962C.

If you're keen to further enhance the detailing of the Tamiya Porsche 911 992 GT3 RS kit, don't miss this reference with a complete photo-etched sheet.

The photo-etched parts sheet is back for a limited time and is perfect for adding detail to your Tamiya Renault R5 Turbo kit. These sheets are suitable for both the rally and road versions. Brake discs and calipers, windshield wipers, pedals, side grilles, and emblems are just some of the details included in this reference. And as a complement, the decals of the 1981 Monte Carlo Rally plates are included, not included in the decal sheet of the Tamiya kit reissue.

Nunu's second reference based on the Porsche 911 991 GT3 RSR kit. Although it was the "pink" Porsche with the number #92 that took victory in the LMGTE Pro category, it's worth remembering that the team's second car, with a livery that pays homage to the Rothmans-sponsored Group C 956s, finished just behind, formalizing a one-two for Porsche. The kit reproduces the 2018 version, characterized by its large rear diffuser that meant the lower part of the rear bumper was not mounted directly on the car. The kit maintains the same parts list as reference PN24040, varying only the decal sheet. Are you up for a one-two finish assembly?

A kit that will allow you to reproduce one of the latest evolutions of the powerful Group 5 BMW 320 E21 Turbo, which achieved victory in Division II of the DRM race called the Westphalia Cup held at the Zolder circuit in the 1980 season.

Set of four 1/24 scale 3D-printed resin rims with a design similar to that used on Hartge 17-inch rims. The rims are different for each axle, with a slightly larger tread depth for the rear rims. A set of treaded rubber tires is included. The set also includes various adapters so the wheels can be mounted on models from the most common manufacturers, such as Tamiya, Hasegawa, or Aoshima. The adapter holder also includes the rim air valves.

Set of four 1/24 scale 3D-printed resin rims with a design similar to that used on OZ Mito 17-inch rims. A set of treaded rubber tires is included. The set also includes various adapters so the wheels can be mounted on models from the most common manufacturers, such as Tamiya, Hasegawa, or Aoshima. The adapter holder also includes the rim air valves.

Set of four 1/24 scale 3D-printed resin rims with a design similar to that used on Work Emotion Cr-Kai 18-inch rims. A set of treaded rubber tires is included. The set also includes various adapters so the wheels can be mounted on models from the most common manufacturers, such as Tamiya, Hasegawa, or Aoshima. The adapter holder also includes the rim air valves.

Set of four 1/24 scale 3D-printed resin rims with a design similar to that used on RSR Porsche Custom 19-inch rims. A set of treaded rubber tires is included. The set also includes various adapters so the wheels can be mounted on models from the most common manufacturers, such as Tamiya, Hasegawa, or Aoshima. The adapter holder also includes the rim air valves.

Set of rubber tires for 17-inch rims. Ideal for use in conjunction with USCP 17-inch rims. The tires measure 26.4 mm outside diameter, 18.8 mm inside diameter, and 10.5 mm wide. The Bridgestone tread marks are embossed on the tire profile.

Set of rubber tires for 18-inch rims. Ideal for use in conjunction with USCP 18-inch rims.. The tires measure 27.2 mm outside diameter, 20.2 mm inside diameter, and 11.5 mm wide. The Dunlop tread marks are embossed on the tire profile.

Up to 11 colours to choose from for the side stripes for your Tamiya Porsche 911 GT3 RS kit. This reference includes the lime green stripes, with both long and short stripes. The decal sheet also includes decals for the wings and seats of the "Weissach RS" version, and strips to recreate the stitching to match the colour of the stripes on the passenger compartment upholstery.

Decal sheet to reproduce the Uno Racing Team's Audi R8 LMS GT3 Evo II version, with number #10, that took part in the 71st edition of the FIA GT Cup held at the Macau circuit. This decal can be used both with Meng kits, where decals for the purple area are included, and with Nunu kits, in which case those purple areas must be painted. Perhaps one of the most striking liveries of the race!

Decal sheet to reproduce the Uno Racing Team version of the Audi R8 LMS GT3 Evo II that, with the number #30, participated in the 71st edition of the FIA GT Cup held at the Macau circuit. This is designed to be used on Meng's kits, and does not fit fully on the Nunu kits of the same model.

With a model so destined to become a legend, it is inevitable that liveries will appear that recall other great milestones of the brand, such as the victory at the 24 Hours of Le Mans in 1970 by the Porsche 917K of the Salzburg team. How would those red colours with white stripes look on the modern 911 992 RS? Well, here is the answer... like a glove!

1:24 scale reproduction of Volk Racing Rays TE37-SL rims used on the Toyota GR Supra A90, designed to be used with the tires of the Tamiya kit. Made in resin using 3D printing, the rims faithfully reproduce the structure of the real rim, improving the appearance of the set. The design of the rims has also taken into account the internal relief of the original Tamiya tire. The mounting method, inserted from the front, allows the lip of the rim to remain on the tire, integrating correctly as it would in reality. In addition to the rims, inflation valves, two types of nuts, standard and long size, and decals with the rim logos are included. Without a doubt, an essential improvement for modelers looking for a totally faithful reproduction in their work.

1:24 scale reproduction of BBS FI-R forged rims used on the Toyota GR Supra A90, designed to be used with the tires of the Tamiya kit. Made in resin using 3D printing, the rims faithfully reproduce the complex structure of the real rim, including all its reliefs and hollows, improving the appearance of the set. The design of the rims has also taken into account the internal relief of the original Tamiya tire. The mounting method, inserted from the front, allows the lip of the rim to remain on the tire, integrating correctly as it would in reality. In addition to the rims, inflation valves, two types of nuts, standard and long size, and decals with the rim logos are included. Without a doubt, an essential improvement for modelers looking for a totally faithful reproduction in their work.

Fantastic 1/12 scale Profil24 kit of the Matra-Simca MS 670 that dominated the 1972 24 Hours of Le Mans, achieving the first two positions. This reference allows the assembly of the unit that achieved victory, driven by Henri Pescarolo and Graham Hill, and which had achieved second place in timed practice. This unit is also distinguished by its shorter rear hood. The kit also includes the necessary parts to assemble its 3-liter V12 engine and the chassis in detail. Once assembled, the driver's door can be left open. In addition, its complete photo-etched sheet allows for even greater detailing during assembly.