Newsletter 640: Let's go to Burgos!November 21^st, 2024

Set of 4 slick tires for 13-inch wheels... to scale, of course. The 4 tires have an inner diameter of 15 mm, an outer diameter of 21 mm and a width of 11 mm.

Set of 4 rims with the design of the 13-inch PLS rims. The outer ring of the rim is made of turned aluminium, while the core of the rim is made using 3D printing. The diameter of the rims is approximately 15,5 mm. This reference DOES NOT include tires.

Set of 4 low profile tread tires, ideal for your most extreme transformations. The 4 tires have an inner diameter of 16.5 mm, an outer diameter of 20.5 mm and a width of 10.5 mm.

Assembled collector's model that reproduces the version of the Porsche 911 Carrera RSR used by George Follmer in the first three races of the Race of Champions (IROC) of 1974, held in Riverside at the end of October 1973, winning the second of them, in the which was the only race not won by future champion, Mark Donohue.

Assembled collector's model that reproduces the long-tail version of the Porsche 956, the specific configuration used by Porsche for Le Mans seeking to increase speed on the long Mulsanne straight. This striking version from the Obermaier Racing team managed to finish the race in seventh position.

Collector's assembled model that reproduces the version of the Ford Puma Rally1 Hybrid with which the Greek driver Jourdan Serderidis, together with Frédéric Miclotte as co-driver, participated in the Safari Rally Kenya in 2022, finishing the event in seventh position.

Assembled collector's model reproducing the version of the Renault 5 Turbo Group B with its legendary orange and red livery in the Calberson colours, used by Jean Ragnotti and Jean-Marc Andrié in the 1980 Tour de Corse ESSO Rallye de France, where they were forced to retire due to problems with their car's alternator.

Assembled collector's model that reproduces the version of the Renault 21 Turbo that, in 1988, broke the world speed record on ice on the frozen lake of Hornavan, in Sweden, travelling at over 250 km/h (with studded tyres).

Assembled collector's model that reproduces the white version of the 1996 McLaren F1 GTR Short Tail circuit model, ideal for carrying out the most diverse transformations and painting the model with that decoration you have in mind and that you like so much.

Set of 600 light weight hexagonal head bolts with stamped flange with diameters of 0.5mm, 0.6mm, 0.7mm, 0.8mm, 1mm and 1.2mm (100 units of each of the different sizes), with which to detail any part or piece of your models where these types of screws are found. With the usual quality of Decalcas products, and the convenience of not needing to use primer, avoiding the loss of detail of the pieces, you will only have to paint and assemble the pieces on your scale model.

Set of 240 light weight hexagonal head bolts with stamped flange like those used in the assembly of a multitude of parts in practically all types of vehicles, with diameters of 1.5mm, 1.75mm, 2mm, 2.25mm and 2.5mm (48 units of each of the different measurements), with which to detail any part where this type of screws is found. With the usual quality of Decalcas products, and the convenience of not needing to use a primer, avoiding the loss of detail of the parts, you will only have to paint and assemble the parts on your scale model.

Hasegawa offers us this beautiful kit, which reproduces the Yamaha YZR500 used by Christian Sarron to reach third place in the 500cc World Championship in 1989. A kit with an extensive and detailed part list faithfully reproducing the parts of the real bike, such as its Brembo brake caliper or the Marchesini rims. The decals have been printed by Cartograf and have excellent detail and color. Note that the Gauloises tobacco advertising is not included in the kit.

Hasegawa offers us the option of building the version with which Japanese motorcycling legend Norihiko Fujiwara achieved the third of his three consecutive 500cc titles in the Japanese Motorcycle Championship. A kit with an extensive and detailed parts list faithfully reproducing the parts of the real bike. Note that the Lucky Strike tobacco advertising is not included in the kit.

At the 1993 Japanese Grand Prix, held at the Suzuka circuit, the Tyrrell team presented minor changes to its car, the 021 equipped with a Yamaha engine. These changes were mainly focused on the front nose and wing, as well as a larger headrest. Hasegawa has reproduced these parts in this reference. The local driver, Ukyo Katayama, qualified well, achieving thirteenth position on the grid, although later in the race he had to retire due to engine problems.

New reference of the classic Hasegawa kit of the Lancia Stratos FH Group 4 rally car. This kit reference will allow you to build the red version of the Lancia Chardonnet team with which the French duo of Bernard Darniche and Alain Mahé won the 1975 Tour de Corse, the second of their six victories on the French island.

The Suzuki RG400 was updated in its 1986 version, incorporating some new features, such as the closed lower part of the fairing and new air vents to improve cooling. Mechanically, its engine was still a 2-stroke four-cylinder, which gave a power of 59 HP. Hasegawa has reproduced this model in great detail, with a kit where its large number of parts (more than 200) will make you enjoy its assembly.

Scale kit to build the model that achieved fourth place in the 1992 1000 Kilometers of Fuji, the second round of the Japanese Sports Prototype Championship (JSCP). The kit has an exquisite part list and precise fit, delighting lovers of the already classic Group C cars.

Hasegawa has developed new moulds for one of Japan's most charismatic cars, the Toyota Starlet. This kit allows you to reproduce the racing version that won the Starlet Grand Cup Race Championship in 1982. The kit includes a whole series of new parts to recreate the racing version, starting with a body without a sunroof, front and rear spoilers, anti-roll bar, new suspension, brakes and rims and, of course, slick tyres. Are you up for it?

Scale kit that allows you to reproduce the 1966 version of the legendary 1966 Volkswagen Beetle, equipped with a 1285 cc engine. The kit allows you to choose between a left-hand or right-hand drive version.

This new Hasegawa kit of the Datsun 240Z allows the model to be reproduced as it was first exported to the North American market, which is why, logically, the steering wheel was mounted on the left side. In addition, this version incorporated other specific elements, such as the rearview mirror, the front and rear bumpers with oversized protectors, and the decorative side strips on the body. All these elements have been incorporated into the kit as new parts.

The Honda XLR250R was launched in 1985, followed by the "Baja" version in 1987, named after one of the world's toughest off-road races. The XLR Baja featured large twin headlights and a rear disc brake. The kit, developed from scratch by Hasegawa using new moulds after a detailed study of the real model, reproduces the 1991 version, where the suspension system was further improved. A real treat for off-road motorcycle lovers!

Photo-etched sheet with different parts to further detail your Hasegawa Honda XLR Baja kit. The elements included are the front and rear brake discs, the speedometer cable guides and the rear brake pipe guides.

1/24 scale kit of the Opel Blitz, reproducing the version used by various fire brigades. A historic model, which was in production for nearly 40 years. The kit includes an extensive parts list, including the complete engine, rubber tires, and a set of decals with two possible decorations. And of course, all the necessary parts with the usual elements of a fire truck, such as hoses or a ladder.

A true classic, the Porsche 911 is one of the most legendary models in the history of the automobile. And some of its versions, such as the RS 2.7, are coveted cars for their special characteristics. Now you can build your own replica of this little piece of automotive history in 1/8 scale, with a kit where every element, every color tone and every line is reproduced with absolute precision. The kit contains 713 pieces, of which 83 are metal, all of them pre-painted and ready to be assembled. Once the assembly of the model is complete, all the doors and hoods open, revealing its complete interior and its immortal 6-cylinder boxer engine located at the rear. And if all this were not enough, it has functions to control the sound of the engine and the activation of the front and rear lights. An exceptional reproduction with extreme attention to detail.

Set of photo-etched parts designed for further detailing the Nissan R91CP kit by Hasegawa. The set includes brake discs, quick locks, radiator grilles, mirrors, pedals, windshield wipers, harness buckles, etc.

Photo-etched parts to improve your Hasegawa Mazda 767B kit. It includes the vertical planes of the rear wing, the grills for the radiators, the harness buckles, the windshield wiper, the pedals, and many more parts in photo-etched parts. It also includes fabric to simulate harnesses and a metal piece to give volume to the harness closure.

Complete set, which allows to assemble up to four units, of the extinguishing system used in competition vehicles. It includes 4 cylinders of the equivalent size to 2,8 litre extinguishers, and all the necessary accessories for a fixed extinguishing system, whether manual or automatic. In addition, the set includes two different types of control units, 3 different types of automatic activation valves, activation buttons and handles, lever-type activator, pressure indicators, quick connectors for extinguishing tubes, sprinklers, a set of decals with different options and a metre of wire to install the fixed extinguishing system, all designed by Decalcas at 1/24 scale. With this product you will give a greater dose of realism to the interior of your vehicles! With the usual quality of Decalcas products, and the convenience of not needing to use a primer, avoiding the loss of detail of the pieces, you will only have to paint and assemble the pieces on your scale model.

Complete and super-detailed kit that combines various materials, such as white metal, mainly for the mechanical parts, such as the engine, gearbox and suspensions, the upper part of the monocoque or the rear wing support, resin for the base of the monocoque and the bodywork, several photo-etched sheets for many of the small details, turned parts such as the outer ring of the rims or the intake trumpets, or the rubber tires, which have the pre-painted Goodyear logos and which, just as the race took place, reproduce the wet tires. This version allows the creation of the Lotus Ford Type 77 unit with the Mario Andretti was proclaimed winner in the last round of the 1976 Formula 1 World Championship, held at the Fuji Speedway circuit under a heavy downpour, and which went down in history for deciding the title in favor of James Hunt after a comeback in which not even he himself knew the position in which he had finished.

In the early 1980s, Porsche 911s were still highly prized in the various rally championships, thanks to their reliability and, above all, speed. One of these Porsches was used by driver Bernard Beguin in the 1982 French, European and World Rally Championships, and on the occasion of the 1982 Tour de Corse, where he obtained a phenomenal third place, he was dressed in the colours of sponsor Kenwood. This is precisely the decoration chosen by Decalcas, so that you can complete one of the most beautiful decorations of the Porsche 911 Group 4 rally car.

This part is designed to allow you to connect the front suspension arms of your Tamiya 1/20 scale Ferrari F189 (640) kit. Thanks to this support that acts as a "template" it is possible to glue, fill and sand the kit parts B13/B14 and B18/B19 to the body before mounting the suspension.

Exquisite 1/43 scale kit that allows you to reproduce the Ferrari 312F1 with which John Surtees achieved the third hat trick of his career, that is, pole position, fastest lap and victory, in the 1966 Belgian Formula 1 Grand Prix, marked by heavy rain. A kit with an extensive parts list, including its characteristic V12 engine with its exhausts visible on the sides. A delight!

Apart from the two units of the "official" Ferrari team, in 2024 there has been a third unit of the Ferrari 499P in the 24 Hours of Le Mans, with a decoration that is perhaps more striking in an intense yellow color. Profil24 has already announced to us that this unit will also be available in its catalog at a 1/24 scale, so that your grid of the legendary 24 Hours is complete.

Limited-time reissue of another of Tamiya's classic references. This special version of the Honda City Turbo also includes a driver figure and the parts needed to assemble the Motocompo scooter. The contents of the kit have been updated, eliminating the electric motor from those included in the original reference, and revising the decals and assembly manual, as well as including masks for painting the windows.

Just like nougat, with the arrival of Christmas the Tamiya 2025 catalogue is also announced. And it is already a classic! In it you will be able to see all the new additions throughout 2024 and others that will arrive soon, such as the Porsche 911 992 GT3 RS. But in addition, and that makes it so interesting, you will also be able to learn about the models and new features of the other modalities, including tools and paints. The catalogue comes with full-colour photos on high-quality paper, with texts in English, German, French and Spanish.

Complete detailing set for Nunu's Porsche 911 991 GT3 RSR kit, including up to five photo-etched sheets, resin parts such as the brake calipers, various turned metal parts such as the rim air valves, the antenna, some electrical connectors and various toggle switches, and paint masks.

Complete detailing set for the Audi R8 LMS Evo II kit references from Meng Model, with many details that have been modified and that differentiate it from the Evo version. The set includes 4 photo-etched sheets, turned metal parts such as the antenna base or the rim valves, the brake calipers made in resin, the fabric for the seatbelts and a mask template.

Kit that will allow you to build the winner of the 1984 Paris Dakar Rally.