Newsletter 638: DownpourNovember 7^th, 2024

This upgrade and detailing set designed by the kit manufacturer will allow you to take your model to the next level, with various photo-etched plates with elements such as the wing planes, radiator grilles or templates to paint the Goodyear logos on the tires. In addition, several decal sheets with carbon fiber patterns (including the complete floor and the monocoque) or various turned metal parts are included, among which we find the gear lever knob, antennas or various connectors for the control units. Spectacular!

Set of parts designed to detail and improve the engine compartment area of the Tamiya Alpine A110 kit, with its characteristic rear inline four-cylinder engine. Other 3D printed elements include the ignition distributor, with the cables to the spark plugs, the exhaust manifold with its corresponding silencer, an auxiliary radiator or different cooling pipes. Spectacular!

Set consisting of the front and rear bumpers used on the Alpine A110. The parts reproduce the continuous rear bumper version, unlike the one in the kit, which is divided into two pieces. In the case of the front bumper, separated in two by the license plate, the rubber stops in the kit come as separate pieces, while in this set the stops are on the bumper itself. Thanks to this set, you can now complete other configurations and finishes of your Alpine.

Complete USCP set to further increase the detail of the interior of your Tamiya Alpine A110 kit, including several elements that the kit does not include. Some of the elements you will find are the door handles, the window levers, the ignition lock with or without keys, the triangular window operating levers, the handbrake lever, or different buttons and levers on the dashboard. Get the most out of your model with all these parts, and make the interior of your Alpine look the way it deserves.

USCP has designed the door panels for the latest versions of the BMW 2002, so you can upgrade your Hasegawa 1/24 scale kit. These highly detailed parts come with the elements placed on the panels separately, such as the window handles, ashtrays and armrests, both front and rear, making painting and creating different types of upholstery easier. A real hit for those looking for maximum detail.

Are you planning to add one of USCP's fantastic engines to your Hasegawa BMW 2002 kit, but you're not quite convinced by the fact that you have to cut the hood off the body? Or have you already started the conversion, but the cut isn't as fine as you would have liked? Don't worry. USCP has taken this possibility into account, and has developed the engine hood as a separate part so that you don't have to worry about cutting the hood. Now there are no more excuses!

German grey spray paint, widely used, for example, for plastics in vehicle interiors.

Decal sheet that will allow you to reproduce the spectacular "Art Car" version of the Porsche 911 GT3 RSR that achieved victory in the LM GTE AM class at the 2019 24 Hours of Le Mans.

Another new and very colorful example of how far virtual competitions can go, where the vehicles are increasingly real, and the competitions more professional. BMW wanted to pay tribute to the heroes of the Red Cross with a free design called #RaceLikeAHero in the BMW M8 GTE, and to be able to participate with it in the different virtual competitions. As it says on the sides, thank you!

Set consisting of the front and rear bumpers used in the first versions of the Alpine A110, whose front bumpers incorporated the indicators. The pieces reproduce the continuous rear bumper version, unlike the one in the kit, which is divided into two pieces. In the case of the front bumper, separated in two by the license plate, the rubber stops in the kit come as separate pieces, while the one in this set has the stops on the bumper itself, as well as the holes to place the indicators. Which Alpine do you want to build?

Set of 204 allen type cylindrical head screws with washer like those used in the assembly of mechanical parts and components, with diameters of 1,5mm (42 pcs), 1,75mm (42 pcs), 2,0mm (40 pcs), 2,25mm (40 pcs) and 2,5mm (40 pcs), with which to detail any part where these types of screws are found in your vehicles. With the usual quality of Decalcas products, and the convenience of not needing to use a primer, avoiding the loss of detail of the parts, you will only have to paint and assemble the parts on your scale model.

Set of 204 allen type cylindrical head screws like those used in the assembly of mechanical parts and components, with diameters of 1,5mm (42 pcs), 1,75mm (42 pcs), 2,0mm (40 pcs), 2,25mm (40 pcs) and 2,5mm (40 pcs), with which to detail any part where these types of screws are found in your vehicles. With the usual quality of Decalcas products, and the convenience of not needing to use a primer, avoiding the loss of detail of the parts, you will only have to paint and assemble the parts on your scale model.

A super interesting reference by Decalcas, including all the Marlboro and GoodYear logos you need for recreating the versions racing at Germany, Austria, France, Nederlands, England, Japan and Monaco Grand Prix in 1976. The decals are additional to the ones already included in the kit.

Have you ever looked for Carello logos to decorate the covers of your auxiliary headlights or to complete the decoration of your models? They are difficult to find, and for this reason, El Torito has decided to launch two references of logos with different measurements, so that you can find the one you need. In this reference, the black logos range from 6 mm long x 0.6 mm high to 12.4 x 1.4 mm. The logos with a white background range from 6.2 mm long x 0.88 mm high to 12.7 x 1.8 mm, and the round logos with the Carello emblem start at a diameter of 2.1 mm and go up to 3.34 mm.

Have you ever looked for Carello logos to decorate the covers of the auxiliary headlights or to complete the decoration of your models? They are difficult to find, and for this reason, El Torito has decided to launch two references of logos with different measurements, so that you can find the one you need. In this reference, the black logos with a yellow background range from 6.1 mm long x 1.6 mm high to 12.5 x 3.4 mm, while the yellow logos with a black background range from 6.2 mm long x 0.88 mm high to 12.7 x 1.8 mm.

Short and long springs reproduced at 1/9 scale, similar to those used in competition for mounting and adjusting mufflers and exhaust pipe components. Made in resin by 3D printing, they reproduce all the details, such as the conical finish of the spring and the "U" anchors that are welded on the exhausts, so that you only have to paint and glue them on your scale kit.

Short and long springs reproduced at 1/9 scale, similar to those used in competition for mounting and adjusting mufflers and exhaust pipe components. Made in resin by 3D printing, they reproduce all the details, such as the conical finish of the spring and the "U" anchors that are welded on the exhausts, so that you only have to paint and glue them on your scale kit.

Set of straight electrical connectors for different applications and connections to the control units of your models. The set includes four different sizes, depending on the diameter of the connection cable to be used. The sizes available in this set are for cables with diameters of 0.8 mm, 0.6 mm, 0.5 mm and 0.4 mm, with 15 units of each type of connector.

Set of straight electrical connectors for different applications and connections to the control units of your models. The set includes two different sizes, depending on the diameter of the connection cable to be used. The sizes available in this set are for cables with diameters of 1.2 mm and 1 mm, with 32 units of the first size and 36 of the second.

Set of bent at 90º electrical connectors for different applications and connections to the control units of your models. The set includes four different sizes, depending on the diameter of the connection cable to be used. The sizes available in this set are for cables with diameters of 0.8 mm, 0.6 mm, 0.5 mm and 0.4 mm, with 12 units of each type of connector.

Set of bent at 90º electrical connectors for different applications and connections to the control units of your models. The set includes two different sizes, depending on the diameter of the connection cable to be used. The sizes available in this set are for cables with diameters of 1.2 mm and 1 mm, with 32 units of the first size and 36 of the second.

Set of straight electrical connectors for different applications and connections to the control units of your models. The set includes two different sizes, depending on the diameter of the connection cable to be used. The sizes available in this set are for cables with diameters of 1.5 mm and 2 mm, with 21 units of the first size and 18 of the second.

Set of bent at 90º electrical connectors for different applications and connections to the control units of your models. The set includes two different sizes, depending on the diameter of the connection cable to be used. The sizes available in this set are for cables with diameters of 1.5 mm and 2 mm, with 21 units of the first size and 12 of the second.

Set of 4 Pirelli Formula 1 rain tyres in the design used between the 2014 and 2016 seasons. The tyres have additional side markings and are modelled as closely as possible to the real tyre. This tyre set is not designed for a specific model and it may be necessary to adapt the rims of the kit to fit the tyres. Rims not included.

Set of 4 Bridgestone Formula 1 intermediate rain tyres in the design used between the 2005 and 2009 seasons. The tyres have additional side markings and are modelled as faithfully as possible, even recreating the tread wear marks. This set of tyres is not designed for a specific model, so it may be necessary to adapt the rims of the kit to fit the tyres. Rims not included.

Set of 4 Goodyear Formula 1 rain tyres in the design used in the 1993 season. The tyres have additional side markings and are modelled as closely as possible to the real tyre. This set of tyres is not designed for a specific model, but can be fitted with relative ease to the Tamiya kit of the McLaren MP4/8, although it may be necessary to adapt the rims of the kit to fit the tyres. Rims not included. With this set of tyres it is possible to reproduce the car used by Ayrton Senna at Donington in 1993, where he achieved victory, and where he carried out his "Lap of the Gods", overtaking four drivers in terrifying conditions on the first lap to take first place.

Set of 4 Bridgestone Formula 1 rain tyres in the design used between the 2005 and 2009 seasons. The tyres have additional side markings and are modelled as closely as possible to the real tyre. This tyre set is not designed for a specific model and it may be necessary to adapt the rims of the kit to fit the tyres. Rims not included.

It is still in the development phase, and some details are still to be defined, such as the decorations that will be possible to make, although it seems that Martini, Gulf or Interscope will be among them. Whatever they are, the first photos of the model are very promising, with very good quality resin and no bubbles, which will be complemented with an extensive sheet of photo-etched parts to increase its detail. More details coming soon!

Complete set, which allows to assemble up to four units of the Heinzmann extinguishing system used in competition vehicles. It includes 4 cylinders and all the accessories necessary to assemble a fixed manual extinguishing system. In addition, the set includes the activation valve, activation buttons and handles, pressure indicators and a set of decals with different options and labels. All designed by Decalcas at 1/24 scale. With the usual quality of Decalcas products, and the convenience of not needing to use a primer, avoiding the loss of detail of the parts, you will only have to paint and assemble the parts on your scale model.

New edition of the Scania T143 M500. Inside the box you will find the usual Italeri parts list, with new decals, rubber tires, and a multitude of parts so you can assemble the model with maximum detail. Once assembled, the model measures 24 cm long.

New re-edition of the decal set to refresh the ones of the veteran Tamiya kit of the Williams FW13B. Don't lose sight of them!! as it is a reissue of limited units, and it will probably be the last time.

Special edition decal sheet that will allow you to reproduce the livery of the Mitsubishi Pajero (also known as Montero or Shogun) sponsored by Rothmans, and that participated in the Paris El Cabo Rally in 1992. This decal set includes the tobacco logos, and for this edition, some aspects of the logos have been revised, such as the colours of the same, adjusting the tone using a bright reddish blue as used on the real car. The same goes for the gilding of the edges of the Rothmans logos. Don't miss it, as there may not be any more reissues of this decal!

Little by little, thanks to their consistency and the reliability of the Porsche, the Kremer Racing Leyton House team climbed the rankings from their fifteenth starting position, to finish the 1987 edition of the 24 Hours of Le Mans just outside the podium, in fourth position. This decal sheet allows you to reproduce this beautiful and striking version, recognizable by its coral blue color, and is designed to be used on any Porsche 962C kit from Tamiya, Hasegawa or Revell.

The 8-cylinder in-line engine of the Alfa Romeo type 158 is a true prodigy, proving its power and reliability by winning no less than two Formula 1 World Drivers' Championships in 1950 and 1951. This kit, which allows the original engine to be reproduced in detail, is made up of white metal and resin parts, photo-etched parts, a decal sheet and various cables. In addition, the parts for assembling a stand on which to display the engine once assembled are included. Spectacular!

It is still incredible to think that, in the mid-1980s, the small 1.5-litre turbocharged engines used in Formula 1 were capable of exceeding 1,000 hp with relative ease. Engines like this have never been seen since, at least on 4-wheeled vehicles. Now, thanks to MFH, it is possible to independently reproduce one of these engines, the Renault V6 fitted to the Lotus 97T, among others. This kit, which allows the original engine to be reproduced in detail, is made up of white metal and resin parts, photo-etched parts, a decal sheet and various cables. And it also includes the parts to assemble a stand on which to display the engine once assembled. Awesome!

Detailed set of 4 5-spoke rims and 4 resin tires for NASCAR Championship vehicles from the 70-80s, designed to be used on 1/24 scale kits, and ideal to replace the original ones on your Revell, Monogram and Salvinos JR kits. The total diameter of the rim + tire set is 29.6 mm, with a width of 14.2 mm. For an easier assembly, a set of Brakes NASCAR Type 1 or Brakes NASCAR Type 2 from Scalecar.Online is required, also available on SpotModel.

Golden color tone similar to that used in the Renault Espace prototype in which the Williams team decided to put nothing more and nothing less than the V10 RS5 engine from its F1 car...

Assembled collector's model that reproduces the version of the McLaren F1 GTR Short Tail of the West Competition team participating in the 1995 BPR Global GT Series, where it achieved two victories in the events held in Monza and Donington.

Set containing 30 quick release fairing fasteners, as used on many of the older racing bikes. These fasteners will allow you to replace the ones that are often moulded onto the kit parts, not only achieving better detailing and volume, but also making painting and definition much easier.