Newsletter 636: Do you copy?October 24, 2024

Do you copy?

Do you copy?
"SpotModel to Star Command, go ahead, Star Command". "Star Command, go ahead, can you read me? Why aren't you answering...?". What is happening? What's going on with SpotModel? Why does it work but then it doesn't, it works again but the next second it stops working one more time?

Earlier this week there was a major technical failure at one of the country's main telecommunications providers, and it has meant a crazy day for us, with hardly any work to do, no emails to receive, no orders to ship, no new products to activate. A chaotic day that we were able to overcome with great doses of patience and, all must be said, spending a longer time than usual building models at home at night to get through it.

And while the technology came back to life again, the SpotModel universe has continued to grow with some interesting things such as the announcement of the 1/12 scale Lotus Ford 77 by MFH, a lot of detail-up parts by USCP for the Tamiya Alpine, the colour tones for the Porsche 992 GT3 RS by Number Five, the reprint of the M23 decal and the new screws by Decalcas, the arrival of the Tucker 48 by Red Wheel or the reeditions of several photo-etched parts by Studio27. :)

It seems that all the buttons, circuits, servers and electronic gadgets in the SpotModel universe are now working correctly, so... let's continue building models to infinity and beyond!!

KMP Kool Models Production: Marking / livery 1/24 scale - Audi R8 LMS GT3 Evo 2 Lionspeed Team sponsored by Car Collection #23 - Dennis Fetzer (DE) + Klaus Koch (DE) + Dennis Marschall (DE) + Simon Reicher (AT) - 24 Hours Nürburgring 2022 - water slide decals - for Nunu reference PN24044 image

KMP Kool Models Production: Marking / livery 1/24 scale - Audi R8 LMS GT3 Evo 2 Lionspeed Team sponsored by Car Collection #23 - Dennis Fetzer + Klaus Koch + Dennis Marschall + Simon Reicher - 24 Hours Nürburgring 2022 - water slide decals - for Nunu reference PN24044

KMP Kool Models Production Reference: KMP-24066

Decal sheet to reproduce the version of the Audi R8 LMS GT3 Evo 2 with the number #23 that participated in the 2022 24 Hours of Nürburgring, achieving the thirteenth final position, 5 laps behind the winner. This model has a different color configuration than the number #24, with the lion in white. The decal sheet has been developed to be used on Nunu's kit of the Audi R8 LMS GT3 Evo 2.
Click here for more details
KMP Kool Models Production: Rims and tyres set 1/24 scale - MG Metro Tarmac Dymags with ventilators - 3D printed parts - for Belkits references BEL015, BEL-015, BEL016 and BEL-016 - 4 units image

KMP Kool Models Production: Rims and tyres set 1/24 scale - MG Metro Tarmac Dymags with ventilators - 3D printed parts - for Belkits references BEL015, BEL-015, BEL016 and BEL-016 - 4 units

KMP Kool Models Production Reference: KMP-TK24093

Set of 4 wheels and tires designed for use with the Belkits MG Metro 6R4 Group B kit. The set includes 2 front Michelin tires with 2 Dymag rims, grooved on the inside so they can be mounted in combination with the kit's suspension without modifications, although the steering cannot be turned. Also included are 2 rear Michelin tires with 2 Dymag rims, with some of the rear suspension having to be slightly modified for assembly. Also included are 2 front and 2 rear fans, 2 rear brake discs, 2 rear brake pads and 2 front wheel hubs. Turn your Metro model into a beast on the road!
Click here for more details
Stone Models: Detail up set 1/20 scale - Benetton Ford B188 - 3D printed parts - for Tamiya reference TAM20021 image

Stone Models: Detail up set 1/20 scale - Benetton Ford B188 - 3D printed parts - for Tamiya reference TAM20021

Stone Models Reference: A086-2024

Detailing set for your Tamiya kit of the Tamiya Benetton Ford B188. With this set, which includes new parts as well as replacement parts, you can detail the engine area, fuel tank, radiator pipes and rear suspension covers in a much more realistic way. The set includes a pair of rear suspension covers, radiator pipes, 20 engine cover screws, distributor cap, 2 sets of intake trumpet covers, spark plug pipes, a set of radiator supports, 5 control units, 5 additional tanks and a fuel tank cap. Really complete!
Click here for more details

ScaleLab 24: Detail up set 1/24 scale - Audi R8 LMS GT3 Evo II - CNC metal parts, paint masks, photo-etched parts and assembly instructions - for Meng Model references CS-009 and CS-011

ScaleLab 24 Reference: SL02-044

Complete photo-etched parts set for Meng Model's Audi R8 LMS Evo II kit references, with details that differentiate it from the Evo version. The set includes 4 sheets of photo-etched parts, turned metal parts, brake calipers, central seatbelt buckle and mask template.
Click here for more details
Reji Model: Marking / livery 1/24 scale - Opel Ascona 400 Group 4 sponsored by Bastos #3, 10 - Guy Colsoul (BE) + Alain Lopes (BE) - Ypres 24 Hours Rally, Monte Carlo Rally - Rallye Automobile de Monte-Carlo 1982 - water slide decals, placement instructions and tobacco sponsor decals - for Belkits references BEL019, BEL-019, BEL020 and BEL-020 image

Reji Model: Marking / livery 1/24 scale - Opel Ascona 400 Group 4 sponsored by Bastos #3, 10 - Guy Colsoul + Alain Lopes - Ypres 24 Hours Rally, Monte Carlo Rally - Rallye Automobile de Monte-Carlo 1982 - water slide decals, placement instructions and tobacco sponsor decals - for Belkits references BEL019, BEL-019, BEL020 and BEL-020

Reji Model Reference: REJI-403

Decal sheet to reproduce the version of the Opel Acona 400 that, with the famous Bastos colours, participated in the 1982 season in the Monte Carlo Rally (dorsal #10) and the 24 Hours of Ypres (dorsal #3), where it obtained second place.
Click here for more details
Italeri: Truck scale model kit 1/24 scale - Opel Blitz Fire Truck - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Italeri: Truck scale model kit 1/24 scale - Opel Blitz Fire Truck - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Italeri Reference: 3966

1/24 scale kit of the Opel Blitz, reproducing the version used by various fire brigades. A historic model, which was in production for nearly 40 years. The kit includes an extensive parts list, including the complete engine, rubber tires, and a set of decals with two possible decorations. And of course, all the necessary parts with the usual elements of a fire truck, such as hoses or a ladder.
Click here for more details
USCP: Detail up set 1/24 scale - Alpine A110 Interior detail-up - 3D printed parts - for Tamiya references TAM24185, TAM24278 and TAM89676 image

USCP: Detail up set 1/24 scale - Alpine A110 Interior detail-up - 3D printed parts - for Tamiya references TAM24185, TAM24278 and TAM89676

USCP Reference: 24A098

Complete USCP set to further increase the detail of the interior of your Tamiya Alpine A110 kit, including several elements that the kit does not include. Some of the elements you will find are the door handles, the window levers, the ignition lock with or without keys, the triangular window operating levers, the handbrake lever, or different buttons and levers on the dashboard. Get the most out of your model with all these parts, and make the interior of your Alpine look the way it deserves.
Click here for more details
Yamamoto Model Parts: Brakes 1/24 scale - Spoon brakes kit - 3D printed parts and water slide decals - 2 + 2 units image

Yamamoto Model Parts: Brakes 1/24 scale - Spoon brakes kit - 3D printed parts and water slide decals - 2 + 2 units

Yamamoto Model Parts Reference: YMPTUN132

3D printed brake system, consisting of 4 discs and 4 brake calipers, similar to that offered by the manufacturer Spoon, a Honda specialist, for models such as the Honda Civic (Gen 4, 5, 6), the Integra DC2/5, the Prelude or the CRX. The front discs have a diameter of 11.7 mm, while the rear ones measure 10.8 mm . The four-cylinder front calipers include the Spoon logo in relief, with details such as the bleed valves or the connecting pipe between both bodies perfectly visible. The rear calipers imitate the design of the car's standard calipers. Decals are also included in case you want to "decorate" the body of your model with the Spoon logos.
Click here for more details
Decalcas: Marking / livery 1/20 scale - McLaren M23 McLaren Racing Limited Team sponsored by Marlboro - James Hunt (GB), Jochen Mass (DE) - German Formula 1 Grand Prix, Austrian Formula 1 Grand Prix, French Formula 1 Grand Prix, Dutch Formula 1 Grand Prix, British Formula 1 Grand Prix, Japanese Formula 1 Grand Prix, Monaco Formula 1 Grand Prix 1976 - water slide decals and assembly instructions - for Tamiya reference TAM20062 image

Decalcas: Marking / livery 1/20 scale - McLaren M23 McLaren Racing Limited Team sponsored by Marlboro - James Hunt, Jochen Mass - German Formula 1 Grand Prix, Austrian Formula 1 Grand Prix, French Formula 1 Grand Prix, Dutch Formula 1 Grand Prix, British Formula 1 Grand Prix, Japanese Formula 1 Grand Prix, Monaco Formula 1 Grand Prix 1976 - water slide decals and assembly instructions - for Tamiya reference TAM20062

Decalcas Reference: DCL-DEC001

A super interesting reference by Decalcas, including all the Marlboro and GoodYear logos you need for recreating the versions racing at Germany, Austria, France, Nederlands, England, Japan and Monaco Grand Prix in 1976. The decals are additional to the ones already included in the kit.
Click here for more details
Red Wheel: Scale model kit 1/25 scale - Tucker 48 - 3D printed parts, photo-etched parts, resin parts, water slide decals, other materials and placement instructions image

Red Wheel: Scale model kit 1/25 scale - Tucker 48 - 3D printed parts, photo-etched parts, resin parts, water slide decals, other materials and placement instructions

Red Wheel Reference: RW25001

Resin kit to reproduce the Tucker 48 or Tucker Torpedo, one of the most exclusive American cars, not only because only 51 units were made, many of which are currently in perfect condition, but because a helicopter engine was used as mechanics. A kit developed with great attention to detail, with several finishing options depending on the version we want to assemble.
Click here for more details
Decalcas: Brakes 1/24 scale - Porsche 911 991 GT3 RSR 2018 - 3D printed parts, water slide decals and assembly instructions - for Decalcas reference DCL-PAR094, or Nunu reference PN24040 image

Decalcas: Brakes 1/24 scale - Porsche 911 991 GT3 RSR 2018 - 3D printed parts, water slide decals and assembly instructions - for Decalcas reference DCL-PAR094, or Nunu reference PN24040

Decalcas Reference: DCL-PAR095

Parts manufactured and designed with 3D technology so that you can replace the discs and calipers of the brake system of the Nunu Porsche 911 991 GT3 RSR kit. This set of parts reproduces in great detail the impressive brake system mounted on the Porsche GT3, designed to withstand the efforts of 24 hours of racing without failing. Included are the front and rear brake discs, with their different sizes and core designs, the brake calipers, the hubs with the central wheel nuts... and even the brake pads. Without a doubt, a great opportunity to present your assembled model with some of the wheels unassembled and enjoy unparalleled detail. With the usual quality of Decalcas products, and the convenience of not needing to use primer, avoiding the loss of detail of the parts, you will only have to paint and assemble the parts on your scale model.
Click here for more details
Miniature: Marking / livery 1/24 scale - Mercedes AMG GT3 Evo Good Smile Racing & UKYO Team #4 - Nobuteru Taniguchi (JP) + Tatsuya Kataoka (JP) - Autobacs Super GT 2020 - water slide decals and placement instructions - for Tamiya references TAM24345 and TAM24350 image

Miniature: Marking / livery 1/24 scale - Mercedes AMG GT3 Evo Good Smile Racing & UKYO Team #4 - Nobuteru Taniguchi + Tatsuya Kataoka - Autobacs Super GT 2020 - water slide decals and placement instructions - for Tamiya references TAM24345 and TAM24350

Miniature Reference: CS027

No one doubts that the Good Smile Racing team's liveries could be considered some of the most spectacular out there, but there's something about some that makes them even more special. At least that's what it seems to us when we look at the version used in 2020 in the Autobacs Super GT, where the team achieved eighth position with some outstanding performances (two podiums in Suzuka and Motegi) at the end of the year. The livery is dominated by soft pink tones, which have been perfectly reproduced on this new decal sheet. Is your collection complete?
Click here for more details
Decalcas: Fire extinguisher 1/24 scale - Heinzmann extinguisher - 3D printed parts and water slide decals manufactured with digital technology - 4 units image

Decalcas: Fire extinguisher 1/24 scale - Heinzmann extinguisher - 3D printed parts and water slide decals manufactured with digital technology - 4 units

Decalcas Reference: DCL-PAR124

Complete set, which allows to assemble up to four units of the Heinzmann extinguishing system used in competition vehicles. It includes 4 cylinders and all the accessories necessary to assemble a fixed manual extinguishing system. In addition, the set includes the activation valve, activation buttons and handles, pressure indicators and a set of decals with different options and labels. All designed by Decalcas at 1/24 scale. With the usual quality of Decalcas products, and the convenience of not needing to use a primer, avoiding the loss of detail of the parts, you will only have to paint and assemble the parts on your scale model.
Click here for more details

USCP: Rims 1/24 scale - FASA rims 13 inch for Alpine A110 - 3D printed parts - for Tamiya references TAM24185, TAM24278 and TAM89676 - 4 units

USCP Reference: 24P191

3D printed resin rims in 1/24 scale, designed to perfectly fit the tires of the Tamiya Alpine A110 kit. Its design simulates the one mounted by the FASA versions, manufactured in Spain, and which used the 1,400 cc engine of the Renault 5 Alpine, but with a compression of 9.3 instead of 10.1. The engine power was 85 hp, and in addition to having a continuous action fan, they also incorporated an oil cooling radiator.
Click here for more details
Decalcas: Fasteners 1/24 scale - Fairing screws hex socket head - 3D printed parts - 50 + 50 + 50 + 50 units image

Decalcas: Fasteners 1/24 scale - Fairing screws hex socket head - 3D printed parts - 50 + 50 + 50 + 50 units

Decalcas Reference: DCL-PAR146

Set of 200 wide round head screws with hexagonal slot (Allen head) such as those used to fasten fairings, with diameters of 1.75mm, 2mm, 2.25mm and 2.5mm (50 units of each of the different sizes), with which to detail any part where this type of screws are found in your vehicles. With the usual quality of Decalcas products, and the convenience of not needing to use a primer, avoiding the loss of detail of the parts, you will only have to paint and assemble the parts on your scale model.
Click here for more details
Decalcas: Fasteners 1/24 scale - Slotted large raised cheese head screws - 3D printed parts - 50 + 50 + 50 + 50 units image

Decalcas: Fasteners 1/24 scale - Slotted large raised cheese head screws - 3D printed parts - 50 + 50 + 50 + 50 units

Decalcas Reference: DCL-PAR147

Set of 200 large cylindrical head screws with rectangular slot like those used to fasten fairings and vehicle parts, with diameters of 1.75mm, 2mm, 2.25mm and 2.5mm (50 units of each of the different sizes), with which to detail any part where this type of screws are found in your vehicles. With the usual quality of Decalcas products, and the convenience of not needing to use a primer, avoiding the loss of detail of the parts, you will only have to paint and assemble the parts on your scale model.
Click here for more details
Studio27: Detail up set 1/20 scale - Brabham BT50 BMW Turbo - Formula 1 World Championship 1982 - photo-etched parts and placement instructions - for Tamiya reference TAM20017 image

Studio27: Detail up set 1/20 scale - Brabham BT50 BMW Turbo - Formula 1 World Championship 1982 - photo-etched parts and placement instructions - for Tamiya reference TAM20017

Studio27 Reference: ST27-FP20174

Limited time reissue of the Studio27 photo-etched parts for Tamiya's Brabham BT50, a model that is characterised by leaving the monocoque and all the mechanical parts visible when the top cover is removed. What better complement to make these areas look in detail than the grilles, plates and belts, as well as the two configurations for the side planes of the rear wing, included in these photo-etched parts? And above all, why not take advantage of this new opportunity?
Click here for more details
Studio27: Detail up set 1/20 scale - Renault Turbo RE30B - Formula 1 World Championship 1982 - photo-etched parts and placement instructions - for Tamiya reference TAM20018 image

Studio27: Detail up set 1/20 scale - Renault Turbo RE30B - Formula 1 World Championship 1982 - photo-etched parts and placement instructions - for Tamiya reference TAM20018

Studio27 Reference: ST27-FP20175

New re-edition of the Studio27 photo-etched sheet for use on the Tamiya kit of the beautiful Renault Turbo RE30B. Radiators, grilles, monocoque parts, side planes of the rear wing, templates for painting the Michelin logos on the tires, are some of the elements you will find in this reference. Take advantage, as it will be available for a limited time.
Click here for more details
Studio27: Detail up set 1/20 scale - Williams Renault FW16 - FIA Formula 1 World Championship 1994 - photo-etched parts and placement instructions - for Fujimi references FJ090580, 09058, GP-14, FJ090597, 09059, GP-18, FJ090658, 09065, GP-21, FJ09069, FJ09099, GPSP-20, FJ091440, 09144, GPSP-22, FJ091860, 09186, GPSP-39, FJ092126, GP-24, 09212 and FJ11266 image

Studio27: Detail up set 1/20 scale - Williams Renault FW16 - FIA Formula 1 World Championship 1994 - photo-etched parts and placement instructions - for Fujimi references FJ090580, 09058, GP-14, FJ090597, 09059, GP-18, FJ090658, 09065, GP-21, FJ09069, FJ09099, GPSP-20, FJ091440, 09144, GPSP-22, FJ091860, 09186, GPSP-39, FJ092126, GP-24, 09212 and FJ11266

Studio27 Reference: ST27-FP20176

Limited time re-edition of Studio27's photo-etched parts for Fujimi's Williams Renault FW16 kit. Radiator grilles, detailed brake cores and exhaust outlets on the bottom, fuel intake, harnesses, or two configurations for the rear wing side planes are just some of the parts included in these photo-etched parts. How could you pass up this new opportunity?
Click here for more details
Studio27: Detail up set 1/20 scale - McLaren Honda MP4/5 - FIA Formula 1 World Championship 1989 - photo-etched parts and placement instructions - for Fujimi references FJ090573, 09057, GP-16, GP16, FJ09062, 090627, GP-19, FJ090627, 09062, GP-19, FJ090665, 09066, GP-22, FJ090719, 09071, GPSP-14, FJ091938, 09193 and GP-1 image

Studio27: Detail up set 1/20 scale - McLaren Honda MP4/5 - FIA Formula 1 World Championship 1989 - photo-etched parts and placement instructions - for Fujimi references FJ090573, 09057, GP-16, GP16, FJ09062, 090627, GP-19, FJ090627, 09062, GP-19, FJ090665, 09066, GP-22, FJ090719, 09071, GPSP-14, FJ091938, 09193 and GP-1

Studio27 Reference: ST27-FP20177

Limited time re-edition of Studio27's photo-etched parts for Fujimi's McLaren Honda MP4/5 kit. Detailing of the brake core bolts, heat shields for the floor exhaust outlets, radiator grilles, harnesses, or new side panels for the front and rear wings are just some of the parts included in these photo-etched parts. Don't miss out on them this time!
Click here for more details
Scalecars.Online: Rims and tyres set 1/24 scale - NASCAR 5-beans rims + tires - 3D printed parts - 4 units image

Scalecars.Online: Rims and tyres set 1/24 scale - NASCAR 5-beans rims + tires - 3D printed parts - 4 units

Scalecars.Online Reference: SCO-R075

Detailed set of 4 5-spoke rims and 4 resin tires for NASCAR Championship vehicles from the 70-80s, designed to be used on 1/24 scale kits, and ideal to replace the original ones on your Revell, Monogram and Salvinos JR kits. The total diameter of the rim + tire set is 29.6 mm, with a width of 14.2 mm. For an easier assembly, a set of Brakes NASCAR Type 1 or Brakes NASCAR Type 2 from Scalecar.Online is required, also available on SpotModel.
Click here for more details

Beemax Model Kits: Detail up set 1/24 scale - Suzuki RGV500 1993 - metal parts, photo-etched parts, plastic parts, turned metal parts and water slide decals - for Beemax Model Kits reference BX13001

Beemax Model Kits Reference: EX13001

As usual with Beemax, the kit will not come alone, and for the new Suzuki RGV500 reference, those modelers who want to go a step further with their detailing will be able to count on a set that includes the metal front fork, a photo-etched sheet with elements such as the brake discs or the radiator grilles, and a decal sheet with the tobacco logos that are not included in the kit.
Click here for more details

Model Factory Hiro: Car scale model kit 1/12 scale - Peugeot 905 Evo1 Bis Peugeot Talbot Sport Team sponsored by Esso #1, 2 - Yannick Dalmas + Derek Warwick + Mark Blundell, Phillippe Alliot + Mauro Baldi + Jean-Pierre Jabouille - 24 Hours Le Mans 1992 - photo-etched parts, resin parts, rubber parts, seatbelt fabric, turned metal parts, water slide decals, white metal parts, other materials and assembly instructions

Model Factory Hiro Reference: MFH-K847

This kit allows you to choose between reproducing the version of the Peugeot 905 Evo1 Bis that, with the number #1, won the 24 Hours of Le Mans in 1992, or the number #2 that came in third place. The kit includes parts in white metal, resin and turned metal, completed with photo-etched sheets, rubber tires, decals that include carbon patterns, and different types of cables. Once assembled, both the doors and the front and rear hoods can be removed, revealing the entire interior and mechanical parts. The rims are anodized in black, as are the wheel nuts in blue or red to differentiate, as happens in the real car, the assembly side. A real gem!
Click here for more details
Decalcas: Rims and tyres set 1/24 scale - Porsche 911 991 GT3 RSR - 3D printed parts and paint masks - for Decalcas reference DCL-PAR095, or Nunu reference PN24040 - 2 + 2 units image

Decalcas: Rims and tyres set 1/24 scale - Porsche 911 991 GT3 RSR - 3D printed parts and paint masks - for Decalcas reference DCL-PAR095, or Nunu reference PN24040 - 2 + 2 units

Decalcas Reference: DCL-PAR094

Complete wheel set including BBS rims with Pilot Sport tires in 1/24 scale, along with air valves and hubs with central nut to detail the Nunu Porsche 911 RSR GT3 Le Mans 2018 kit. This set allows you to replace the rims and tires of the kit, which lack detail and are out of scale. Decalcas has paid great attention to detail, differentiating the front and rear rims, with their different area of joining the spokes to the rim... and has even reproduced the transverse gaps of the spokes of these BBS rims. Of course, the front and rear wheels are different in both diameter and width, with the rear wheels being larger than the front ones in both measurements, just like on the real car. The central nuts also collect the machining that allows a quick and precise tightening of the wheels in the pit stops. The pre-cut masks will allow you to easily paint the tires and rims without interference in the paint. All the pieces are printed in 3D resin with the usual quality of Decalcas, so you can assemble your model with the realism it deserves,
Click here for more details
USCP: Detail up set 1/24 scale - Alpine A110 1600SC - Engine bay detail-up - 3D printed parts - for Tamiya references TAM24185, TAM24278 and TAM89676 image

USCP: Detail up set 1/24 scale - Alpine A110 1600SC - Engine bay detail-up - 3D printed parts - for Tamiya references TAM24185, TAM24278 and TAM89676

USCP Reference: 24A097

Set of parts designed to detail and improve the engine compartment area of the Tamiya Alpine A110 kit, with its characteristic rear inline four-cylinder engine. Other 3D printed elements include the ignition distributor, with the cables to the spark plugs, the exhaust manifold with its corresponding silencer, an auxiliary radiator or different cooling pipes. Spectacular!
Click here for more details
USCP: Detail 1/24 scale - Alpine A110 - Bumpers - 3D printed parts - for Tamiya references TAM24185, TAM24278 and TAM89676 image

USCP: Detail 1/24 scale - Alpine A110 - Bumpers - 3D printed parts - for Tamiya references TAM24185, TAM24278 and TAM89676

USCP Reference: 24A100

Set consisting of the front and rear bumpers used on the Alpine A110. The parts reproduce the continuous rear bumper version, unlike the one in the kit, which is divided into two pieces. In the case of the front bumper, separated in two by the license plate, the rubber stops in the kit come as separate pieces, while in this set the stops are on the bumper itself. Thanks to this set, you can now complete other configurations and finishes of your Alpine.
Click here for more details
Tamiya: Car scale model kit 1/24 scale - Honda Ballad Sports Mugen CR-X PRO - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Tamiya: Car scale model kit 1/24 scale - Honda Ballad Sports Mugen CR-X PRO - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Tamiya Reference: TAM24045

Limited-time re-edition of another of Tamiya's classic references. This special version of the Honda CR-X, manufactured by Mugen, adopted many of the solutions that Honda used in its racing models, apart from having a wider body with prominent wheel arches. The coupe shape of the body has been faithfully reproduced by Tamiya, as has the interior, where you can choose between a left- or right-hand drive version.
Click here for more details
Tamiya: Motorbike scale model kit 1/12 scale - Honda Dax 125 sponsored by Tamiya - metal parts, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions image

Tamiya: Motorbike scale model kit 1/12 scale - Honda Dax 125 sponsored by Tamiya - metal parts, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Tamiya Reference: TAM14142

New addition to Tamiya's 1/12 scale motorcycle range. The one chosen this time is the small 125 cc Honda Dax, a motorcycle that follows the concept of the popular Monkey. The Honda Dax was launched on the market in 1969, and was characterized by its distinctive T-shaped chassis made of pressed steel. which housed the fuel tank. Apart from the decals necessary to make the special Tamiya version of this bike, you can also build the standard version.
Click here for more details
Reji Model: Marking / livery 1/24 scale - Ford Escort Cosworth Group A sponsored by Yacco, Giesse #1 - Patrick Bernardini (FR) + Catherine François (FR) - Tour de Corse Rallye de France 1996 - 3D printed parts, water slide decals and placement instructions - for Domino references DMN24144 and FCD001, or Tamiya references TAM24144, TAM24153, TAM24171 and TAM24xxx image

Reji Model: Marking / livery 1/24 scale - Ford Escort Cosworth Group A sponsored by Yacco, Giesse #1 - Patrick Bernardini + Catherine François - Tour de Corse Rallye de France 1996 - 3D printed parts, water slide decals and placement instructions - for Domino references DMN24144 and FCD001, or Tamiya references TAM24144, TAM24153, TAM24171 and TAM24xxx

Reji Model Reference: REJI-394

In 1995 Patrick Bernardini achieved what was perhaps one of his greatest achievements, winning the Monte Carlo Rally, although in a strange edition where the rally only counted towards the 2L World Championship. The following year, a similar situation occurred in the Tour de Corse, but with the dry tarmac and in more mousetrap stages, Bernardino could do little with his Ford Escort Cosworth against the agility of the Kit Car, which occupied the first two positions, already giving a clear warning of what they would be capable of facing the WRCs. The set includes the corresponding decal sheet, and a set of 3D printed Cromodora rims to use with the tires on the Tamiya kit.
Click here for more details
Komakai: Reference / walkaround book - Renault 5 Turbo - for Heller reference 80717, or Tamiya references TAM24027 and TAM24368 image

Komakai: Reference / walkaround book - Renault 5 Turbo - for Heller reference 80717, or Tamiya references TAM24027 and TAM24368

Komakai Reference: KOM-FG037

New installment of Komakai's Fast Guides series, with a publication full of exquisite photographs that cover in great detail the spectacular Renault 5 Turbo. Includes 32 full color pages with detailed images of the interior, exterior, wheels, etc...
Click here for more details
Number Five: Paint for airbrush - GT3 RS White - 1 x 30ml - for Profil24 references P24055, P24063, P24110, P24110K and P24111K, or Renaissance Models references 074, 074C and 080, or Tamiya reference TAM24370 image

Number Five: Paint for airbrush - GT3 RS White - 1 x 30ml - for Profil24 references P24055, P24063, P24110, P24110K and P24111K, or Renaissance Models references 074, 074C and 080, or Tamiya reference TAM24370

Number Five Reference: N5-C218

White colour tone identical to that used on the Porsche 911 GT3 RS and GT3 RSR. This tone has been specially designed for use with the new Tamiya kit.
Click here for more details
Number Five: Paint for airbrush - GT3 RS Red - 1 x 30ml - for Tamiya reference TAM24370 image

Number Five: Paint for airbrush - GT3 RS Red - 1 x 30ml - for Tamiya reference TAM24370

Number Five Reference: N5-C219

Red colour tone identical to that used on the Porsche 911 GT3 RS and GT3 RSR. This tone has been specially designed for use with the Tamiya model.
Click here for more details
Number Five: Paint for airbrush - GT3 RS Black - 1 x 30ml - for Tamiya reference TAM24370 image

Number Five: Paint for airbrush - GT3 RS Black - 1 x 30ml - for Tamiya reference TAM24370

Number Five Reference: N5-C220

Black colour tone identical to that used on the Porsche 911 GT3 RS and GT3 RSR. This tone has been specially designed for use with the Tamiya model.
Click here for more details
Number Five: Paint for airbrush - GT3 RS Silver - 1 x 30ml - for Tamiya reference TAM24370 image

Number Five: Paint for airbrush - GT3 RS Silver - 1 x 30ml - for Tamiya reference TAM24370

Number Five Reference: N5-C221

Silver colour tone identical to that used on the Porsche 911 GT3 RS and GT3 RSR. This tone has been specially designed for use with the Tamiya model.
Click here for more details
Number Five: Paint for airbrush - GT3 RS Ice Grey - 1 x 30ml - for Tamiya reference TAM24370 image

Number Five: Paint for airbrush - GT3 RS Ice Grey - 1 x 30ml - for Tamiya reference TAM24370

Number Five Reference: N5-C222

Ice Grey colour tone identical to that used on the Porsche 911 GT3 RS and GT3 RSR. This tone has been specially designed for use with the Tamiya model.
Click here for more details