Newsletter 635: 312 T4October 16^th, 2024

Diver figure not included.

Driver not included.

White colour tone similar to that used on the Opel Ascona, both in its street version and in the rally version. It is the ideal colour tone to be used when painting, for example, the new Belkits kits.

Blue colour tone equal to the one used in the decals of the Opel Ascona 400 Belkits kit (reference BEL020), driven by Walter Rohrl in the 1982 Monte Carlo Rally. This tone has been designed so that you can use it to paint those areas of the model that the decal does not completely cover... or you can even choose not to use some of the blue decals on the body.

Lambda probe at 1/9 scale. Made in resin by 3D printing, they reproduce all the details with the usual quality of DECALCAS products, so you only have to paint and glue on your scale model.

Set of 16 inflation valves angled at 90º, in 1:9 scale, produced using 3D printing, which faithfully reproduces this type of valves increasingly used in modern motorcycles. With the usual quality of Decalcas products, and the convenience of not requiring the use of primer, avoiding the loss of detail in the pieces, you will only have to paint and assemble the pieces on your scale model.

Set of 700 screws with bolt with nut, such as those used in the assembly of mechanical parts and components. of diameters of 0,5mm, 0,6mm, 0,7mm, 0,8mm, 0,9mm, 1mm and 1,1mm (100 units of each of the different measurements), with which to detail any part where this is located type of screws in your vehicles. With the usual quality of Decalcas products, and the convenience of not needing the use of primer, avoiding the loss of detail of the pieces, you will only have to paint and assemble the pieces on your scale model.

Set of 700 allen type cylindrical head screws like those used in the assembly of mechanical parts and components, of diameters of 0,5mm, 0,6mm, 0,7mm, 0,8mm, 0,9mm, 1mm and 1,2mm (100 units of each of the different measurements), with which to detail any part where this is located type of screws in your vehicles. With the usual quality of Decalcas products, and the convenience of not needing the use of primer, avoiding the loss of detail of the pieces, you will only have to paint and assemble the pieces on your scale model.

The arrival of Nunu's long-awaited Porsche 991 GT3 is getting closer, and with so many versions that raced around the world with the different Porsche teams, there are many liveries to choose from, such as the Gulf Racing one that participated in the 24 Hours of Le Mans 2018 within the GTE Am category, and finished the race in 40th position.

In addition to the two units of the 991 GT3 RSR with the tribute colors, Porsche officially lined up in the 2018 24 Hours of Le Mans two other units that usually participate in the IMSA Championship on the EE.UU. The 911s with numbers #93 and #94 were registered in the GTE Pro category, with #93 achieving the best result by reaching the finish line in twenty-seventh position, although far from the category leaders.

There are several decorations that the Porsche team has been using on its 911 GT3 RSR as a tribute to some of its successes, such as this one commemorating the victory of the Porsche GT1 at the 1998 24 Hours of Le Mans. This decal sheet will allow you to reproduce this exclusive version, which was only used for the last race of the 2018 IMSA WeatherTech Championship held at the Road Atlanta Petit Le Mans circuit.

There are several decorations that the Porsche team has been using on their 911 GT3 RSR as a tribute to some of their successes, such as this one recalling the successes of Bob Akin, with his famous Porsches sponsored by Coca-Cola. This decal sheet will allow you to reproduce this exclusive version, which was only used on the occasion of the last race of the 2019 IMSA WeatherTech Championship held at the Road Atlanta circuit. Don't you think it's beautiful?

If you have one of the Tamiya kits of the Mercedes CLK-GTR that dominated the FIA GT championship in the late 1990s, you're in luck. With this decal set, you'll not only have a fresh set to replace the one on your kit, but you'll also be able to choose between three possible decoration options, since the three units used in the 1997 season used different main sponsors. Whatever your selection, don't miss out!

Complete transkit to be able to make the version of the Porsche 911 winner of the 1973 24 Hours of Daytona. Scale Production has given this reference a twist, now also including the rear engine cover with the ducktail spoiler and the decals. Other parts, such as the rims or the interior fire extinguisher, are made using 3D printing. The transkit is developed to be used based on the Fujimi Porsche 911, although the ideal would be the '73 Porsche 911 RS Enthusiast series to have the most accurate engine.

Do you have a kit of the BMW 2002 from Hasegawa, and you want to widen the wings to give it a more sporty image, but keeping it street-oriented? Well, that's what Scale Production has thought, which now offers us a reduced version of its transkit that includes only the widened front and rear wings.

Do you have a kit of the Tamiya Alfa Romeo Giulia Sprint GTA, and you want to give it a more sporty image by widening the wings, but keeping it street-oriented? Well, that's what Scale Production has thought, which now offers us a reduced version of its transkit that includes only the widened front and rear wings.

Decal sheet with logos of product brands and accessories for many automobile preparations.

Set of 204 screws with nut with through bolt and washer, such as those used in the assembly of mechanical parts and components, with diameters of 1.5mm (42 pcs), 1.75mm (42 pcs), 2.0mm (40 pcs), 2.25mm (40 pcs) and 2.5mm (40 pcs), with which to detail any part where this type of screws are found in your vehicles. With the usual quality of Decalcas products, and the convenience of not needing to use a primer, avoiding the loss of detail of the parts, you will only have to paint and assemble the parts on your scale model.

Set of 204 screws with nut with through bolt, such as those used in the assembly of mechanical parts and components, with diameters of 1.5mm (42 pcs), 1.75mm (42 pcs), 2.0mm (40 pcs), 2.25mm (40 pcs) and 2.5mm (40 pcs), with which to detail any part where this type of screws are found in your vehicles. With the usual quality of Decalcas products, and the convenience of not needing to use a primer, avoiding the loss of detail of the parts, you will only have to paint and assemble the parts on your scale model.

Decal sheet for the Audi R8 GT3 version of the Czech team ISR Racing during its participation in the 2019 ADAC GT Masters Championship, where it improved its performance throughout the season, achieving its best result (fourth) in the last round held at Sachsenring. The decals have been designed to fit the different references of the Meng Model Audi R8 kit.

Decal to make the different decorations of the Porsche 935/78 Moby Dick during its participations in the 1978 season, the most remembered being the one from the 24 Hours of Le Mans. You can also choose the version that won the 6 Hours of Silverstone (number #1) or the one that participated in the German DRM races (number #40). This decal is designed to replace the one on your old Tamiya kit.

Full decoration, including all tobacco advertising logos, to replace and complete the decals on your Tamiya Lotus Honda 99T kit.

Reissue of the decal sheet that allows you to make any of the three units of the official Martini Lancia team that took part in the Monte Carlo Rally in 1990, where Didier Auriol took victory with the number #7 on the doors. This reissue brings several changes with respect to the reference SHK-322. To begin with, the red part between the Martini stripes now has to be painted, allowing the stripes themselves to be improved so that they adapt better to the areas of the kit's bodywork. There is also better detail in many of the logos, and the rally plates that go on the rear window for each number have been added. And, of course, all the edges of the main sponsor logos are gold plated.

This decal sheet has been designed to complement the Martini versions of the original Hasegawa kit. All main sponsor logos are outlined in gold plated and the blue colour has been adjusted, in both cases to match those on the real car. Other logos are also included to complete the kit's decals, such as the "Group B" stickers or the Rothmans logos on the Tour de Corse number plates. With one decal sheet it is possible to complete up to two kits, although you must choose between the 1983 Monte Carlo or the 1984 Tour de Corse.

Decal sheet that will allow you to reproduce the version of the Porsche 911 GT3 RSR that achieved victory in the LM GTE AM class at the 2020 8 Hours of Bahrain, the final round of the 2019/2020 FIA WEC Championship.

Decal sheet that will allow you to reproduce the version of the Porsche 911 GT3 RSR that achieved victory in the LM GTE AM class at the 2018 24 Hours of Le Mans.

1/25 scale kit of the imposing Kenworth W900, which in this version reproduces a double bedroom topped with an aerodynamic roofline in the rear of the cabin. Once assembled, the model allows its front hood to be tilted forward to reveal a detailed turbocharged six-cylinder diesel engine. Other details included in the kit are the chrome wheels, the double exhaust pipes, the speakers mounted on the roof or the mirrors with antennas. A true monster of the road!

Experience the fascination of assembling an icon of 80s supercars in detail with Revell's new 1/24 scale kit of the Lamborghini Countach LP500S. The 124 pieces of the kit are reproduced with precision and realism, and not only allow the assembly of its impressive 12-cylinder engine, but also the small front door where the spare wheel and brake master cylinder is located is mobile, allowing it to be opened.

This kit, composed of 112 pieces, allows you to create the legendary Shelby Mustang GT500, which stood out for its impressive power and performance thanks to its powerful 7-liter V8 engine, which in the kit is faithfully reproduced to be admired once assembled thanks to its operational hood, The kit includes several chrome parts, such as the radiator grill and bumpers, in addition to including two sets of rims. Its complete decal sheet will allow you a certain degree of customization when building your model.

Limited time re-edition of the 1991 season Mansell's and Patrese's FW14. Hasegawa already put in our hands in 1/24 scale a few years ago, and now we can enjoy it again.

The Italian driver Andrea Aghini could be described as a specialist in tarmac rallies. as he demonstrated on more than one occasion. Precisely one of them took place in the 1994 Tour de Corse, where with a Grifone-private Celica ST185 he not only achieved third final position, but even had the luxury of finishing ahead of Juha Kankkunen's official Celica ST185. The kit maintains the same part list as other Hasegawa Celica references, modifying only the decals.

The 1986 edition was not an easy rally, with a lot of snow in certain areas. The official Lancia team already had the new Delta S4, but Serviá did not want to miss the opportunity to participate again in Montecarlo with his reliable Lancia 037, with which he gave great driving lessons, finishing in seventh position behind the backs of the official cars.

A year before his first podium, Valentino Rossi already participated aboard a Corolla WRC in the Monza Rally Show. Decorated in an intense yellow color, the experienced MotoGP rider demonstrated his tremendous skill by achieving seventh final position. This version of the Toyota Corolla WRC is the new reference chosen by Hasegawa, with a new and complete decal sheet. The kit comes with the wheels and suspensions corresponding to the tarmac configuration.

Limited edition of the Lancia Delta HF Integrale 16V Evo kit, this time with the decoration used by perhaps the best-known and most successful Argentine rally driver in the World Rally Championship, Jorge Recalde, in the Rally Acropolis in 1992, where it achieved sixth position. Regarding other references of the same Hasegawa kit, the only change is the new decal sheet.

In the 1992 season, the Object T team, with the striking Nissan Skyline R32 Gr.A sponsored by AXIA, was fighting for the Japanese Touring Car Championship in the top JTC-1 category until the last round, thanks to great results such as victory in the fourth round of the season held at the Suzuka circuit, in addition to finishing on the podium on four other occasions. The kit presents a very complete and detailed part list with very good fits, including the specific BBS rims for the AXIA version and pieces to correct the size of the front bumper air inlet to the intercooler.