Newsletter 634: CloggingOctober 9, 2024

Clogging

Clogging
Since we carried out the last extension of the already spacious SpotModel warehouse, we have had a problem: the road that leads to our facilities is clogged daily with the hundreds and hundreds of trucks that bring us products...

This is because thanks to our warehouse management system, we are able to receive and store at top speed; in fact, at such incredible speed that logistics companies cannot keep up with bringing us more and more models and end up saturating the city's traffic.

Among all this material, the first truck with Hasegawa scale models has already arrived (there are still two more trucks to go), a truck from Revell, another one from Fujimi, one from Profil, one from Model Factory Hiro and a while ago two trucks arrived with the new Opel Ascona by Belkits. From the window we can see a truck full of SK Decals decals; slowly approaching we can also see the truck with the new Solido models; further behind is a truck full of Zero Paints paints, and two trucks with the latest Decalcas references for the Nunu Porsche as well as the new screws for detailing, and behind them there are several Tamiya trucks...

After receiving everything and placing them on their corresponding shelves comes the part that we like the most: carefully preparing your SpotModel parcels with all the little things that you have ordered us. :D

Solido: Diecast model car 1/18 scale - Peugeot 205 GTI 1.6 Group N sponsored by Damart #132 - Francois Delecour (FR) + Anne-Chantal Pauwels (FR) - Monte Carlo Rally - Rallye Automobile de Monte-Carlo 1986 - metal parts, plastic parts and rubber parts image

Solido: Diecast model car 1/18 scale - Peugeot 205 GTI 1.6 Group N sponsored by Damart #132 - Francois Delecour + Anne-Chantal Pauwels - Monte Carlo Rally - Rallye Automobile de Monte-Carlo 1986 - metal parts, plastic parts and rubber parts

Solido Reference: DIE-59946

If there is a rally in which Francois Delecour has always stood out, it has been the Monte Carlo... and before surprising the world fighting for victory in 1991 with the Ford Sierra 4x4 of Group A in which it was his debut with that car, he participated on several occasions as part of the Peugeot Challenge, a brand for which he soon became an official driver.
Click here for more details
Solido: Diecast model car 1/18 scale - McLaren Mercedes MCL60 McLaren F1 Team sponsored by Chrome, Velo #4 - Lando Norris (GB) - British Formula 1 Grand Prix 2023 - metal parts, plastic parts and rubber parts image

Solido: Diecast model car 1/18 scale - McLaren Mercedes MCL60 McLaren F1 Team sponsored by Chrome, Velo #4 - Lando Norris - British Formula 1 Grand Prix 2023 - metal parts, plastic parts and rubber parts

Solido Reference: DIE-59950

What a great second half of McLaren's season in 2023, with a car that radically changed its sensations and performance compared to what was seen at the beginning of the year. This assembled model reproduces the version with which Lando Norris achieved second position in the British Grand Prix held at the Silverstone circuit, after leading for a few laps thanks to a sensational start. A result that tasted like glory at McLaren!
Click here for more details
Solido: Diecast model car 1/18 scale - Porsche 911 Carrera RSR Roger Penske Team #1 - Mark Donohue (US) - IROC - International Race of the Champions 1974 - metal parts, plastic parts and rubber parts image

Solido: Diecast model car 1/18 scale - Porsche 911 Carrera RSR Roger Penske Team #1 - Mark Donohue - IROC - International Race of the Champions 1974 - metal parts, plastic parts and rubber parts

Solido Reference: DIE-60557

Assembled collector's model that reproduces the version of the Porsche 911 Carrera RSR used by Mark Donohue to win the fourth and final round, held in Daytona, of the 1974 IROC championship, and which also served him to become champion of the first edition of the IROC Race of Champions.
Click here for more details
Solido: Diecast model car 1/18 scale - Opel Omega Evo 500 Irmscher Team #37 - Volker Strycek (DE) - DTM 1991 - metal parts, plastic parts and rubber parts image

Solido: Diecast model car 1/18 scale - Opel Omega Evo 500 Irmscher Team #37 - Volker Strycek - DTM 1991 - metal parts, plastic parts and rubber parts

Solido Reference: DIE-60558

Assembled collector's model that reproduces the version of the Opel Omega 3000 Evo 500 of the official Opel team during the 1991 season in the German DTM Championship. It was not a season of great results for Opel, and its driver Volker Strycek achieved the best position of the year, ninth place in the second race on the Diepholz circuit.
Click here for more details
Solido: Diecast model car 1/18 scale - Lada Niva sponsored by Pastis 51, VSD #182 - Jean-Pierre Jabouille (FR) + Michel Sardou (FR) - Paris Dakar Rally 1984 - metal parts, plastic parts and rubber parts image

Solido: Diecast model car 1/18 scale - Lada Niva sponsored by Pastis 51, VSD #182 - Jean-Pierre Jabouille + Michel Sardou - Paris Dakar Rally 1984 - metal parts, plastic parts and rubber parts

Solido Reference: DIE-60560

One of the many examples of drivers from other categories who, sooner or later, feel the attraction or call of the desert, participating in what is surely the toughest rally-raid in the world, the Paris-Dakar. This assembled collector's model reproduces the version of the Lada Niva with which the Formula 1 driver Jean-Pierre Jabouille participated in the 1984 edition accompanied by Michel Sardou, having to abandon.
Click here for more details
Solido: Diecast model car 1/18 scale - Porsche 956 LH Kremer Racing Team sponsored by Kenwood #21 - Mario Andretti (US) + Michael Andretti (US) + Phillippe Alliot (FR) - 24 Hours Le Mans 1983 - metal parts, plastic parts and rubber parts image

Solido: Diecast model car 1/18 scale - Porsche 956 LH Kremer Racing Team sponsored by Kenwood #21 - Mario Andretti + Michael Andretti + Phillippe Alliot - 24 Hours Le Mans 1983 - metal parts, plastic parts and rubber parts

Solido Reference: DIE-60721

Assembled collector's model that reproduces the long-tail version of the Porsche 956, the specific configuration used by Porsche for Le Mans to improve speed on the long Mulsanne straight, with which Mario Andretti, Michael Andretti and Philippe Alliot achieved third position in the 1983 24 Hours of Le Mans.
Click here for more details
Solido: Diecast model car 1/18 scale - BMW M3 E30 sponsored by Hartge #3 - Ingvar Carlsson (SE) + Per Carlsson (SE) - ADAC Deutschland Rally 1990 - metal parts, plastic parts and rubber parts image

Solido: Diecast model car 1/18 scale - BMW M3 E30 sponsored by Hartge #3 - Ingvar Carlsson + Per Carlsson - ADAC Deutschland Rally 1990 - metal parts, plastic parts and rubber parts

Solido Reference: DIE-60737

Assembled collector's model that reproduces the version of the BMW M3 E30 with which Ingvar and Per Carlsson participated in the 1990 ADAC Rally of Germany. Despite being a quite different car from the Mazda 323 Group A with which they achieved two victories in the 1989 World Rally Championship (Sweden and New Zealand), they defended themselves quite well against all-wheel drive vehicles, managing to finish in fifth position.
Click here for more details
Solido: Diecast model car 1/18 scale - Ford Sierra RS Cosworth Group A Ford Motor Co. Team sponsored by Panach #8 - Didier Auriol (FR) + Bernard Occelli (FR) - Tour de France Automobile - Tour de Corse 1988 - metal parts, plastic parts and rubber parts image

Solido: Diecast model car 1/18 scale - Ford Sierra RS Cosworth Group A Ford Motor Co. Team sponsored by Panach #8 - Didier Auriol + Bernard Occelli - Tour de France Automobile - Tour de Corse 1988 - metal parts, plastic parts and rubber parts

Solido Reference: DIE-60748

Assembled collector's model that reproduces the version of the Ford Sierra RS Cosworth with which Didier Auriol, with Bernard Occelli on his right, achieved victory in the 1988 Tour de Corse.
Click here for more details

Meng Model: Motorbike scale model kit 1/9 scale - BMW R18 Classic - metal parts, paint masks, photo-etched parts, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Meng Model Reference: MT-006

Meng Model presents us with the BMW R18 Classic kit, a Cruiser with a lot of personality. The kit has high-quality details, with several chrome parts, as well as a detailed engine.
Click here for more details

Model Factory Hiro: Transkit 1/12 scale - Tyrrell 007 sponsored by ELF #3, 4 - Jody Scheckter, Patrick Depailler - USA West Long Beach Formula 1 Grand Prix 1976 - photo-etched parts, resin parts, rubber parts, water slide decals, white metal parts, other materials, assembly instructions and painting instructions - for Tamiya reference TAM12036

Model Factory Hiro Reference: MFH-K322

The Tyrrell 007 was the successor to the Tyrrell 006, the car with which Jackie Stewart won his third and last Formula 1 World Champion title in 1973, retiring that same year. The Tyrrell 007 debuted in the 1974 season, and was used until the 1976 season, where it was still used in the first races of the season before being replaced by the six-wheeled P34. And precisely taking as a starting point the 1/12 scale kit of the Tamiya P34, this wonderful and elaborate transkit will allow you to assemble the most evolved version of the Tyrrell 007, as used in the USA West Grand Prix held in Long Beach, where Patrick Depailler managed to finish in third position. The transkit allows the entire kit to be converted, of which practically only its Cosworth DFV engine is used. Are you ready for the challenge?
Click here for more details
Number Five: Paint for airbrush - GT3 RS White - 1 x 30ml - for Profil24 references P24055, P24063, P24110, P24110K and P24111K, or Renaissance Models references 074, 074C and 080, or Tamiya reference TAM24370 image

Number Five: Paint for airbrush - GT3 RS White - 1 x 30ml - for Profil24 references P24055, P24063, P24110, P24110K and P24111K, or Renaissance Models references 074, 074C and 080, or Tamiya reference TAM24370

Number Five Reference: N5-C218

White colour tone identical to that used on the Porsche 911 GT3 RS and GT3 RSR. This tone has been specially designed for use with the new Tamiya kit.
Click here for more details
Number Five: Paint for airbrush - GT3 RS Red - 1 x 30ml - for Tamiya reference TAM24370 image

Number Five: Paint for airbrush - GT3 RS Red - 1 x 30ml - for Tamiya reference TAM24370

Number Five Reference: N5-C219

Red colour tone identical to that used on the Porsche 911 GT3 RS and GT3 RSR. This tone has been specially designed for use with the Tamiya model.
Click here for more details
Number Five: Paint for airbrush - GT3 RS Black - 1 x 30ml - for Tamiya reference TAM24370 image

Number Five: Paint for airbrush - GT3 RS Black - 1 x 30ml - for Tamiya reference TAM24370

Number Five Reference: N5-C220

Black colour tone identical to that used on the Porsche 911 GT3 RS and GT3 RSR. This tone has been specially designed for use with the Tamiya model.
Click here for more details
Number Five: Paint for airbrush - GT3 RS Silver - 1 x 30ml - for Tamiya reference TAM24370 image

Number Five: Paint for airbrush - GT3 RS Silver - 1 x 30ml - for Tamiya reference TAM24370

Number Five Reference: N5-C221

Silver colour tone identical to that used on the Porsche 911 GT3 RS and GT3 RSR. This tone has been specially designed for use with the Tamiya model.
Click here for more details
Number Five: Paint for airbrush - GT3 RS Ice Grey - 1 x 30ml - for Tamiya reference TAM24370 image

Number Five: Paint for airbrush - GT3 RS Ice Grey - 1 x 30ml - for Tamiya reference TAM24370

Number Five Reference: N5-C222

Ice Grey colour tone identical to that used on the Porsche 911 GT3 RS and GT3 RSR. This tone has been specially designed for use with the Tamiya model.
Click here for more details
Number Five: Paint for airbrush - GT3 RS Artic Grey - 1 x 30ml - for Tamiya reference TAM24370 image

Number Five: Paint for airbrush - GT3 RS Artic Grey - 1 x 30ml - for Tamiya reference TAM24370

Number Five Reference: N5-C223

Artic Grey colour tone identical to that used on the Porsche 911 GT3 RS and GT3 RSR. This tone has been specially designed for use with the Tamiya model.
Click here for more details

Tameo Kits: Car scale model kit 1/43 scale - Lotus Ford 72D Lotus Team sponsored by John Player Special #6 - Emerson Fittipaldi - Italian Formula 1 Grand Prix 1972 - metal parts, photo-etched parts, rubber parts, vacuum formed parts, water slide decals, white metal parts, other materials, assembly instructions, painting instructions and tobacco sponsor decals

Tameo Kits Reference: WCT072

After seeing the Lotus Ford Cosworth 72D reproduced in almost all scales, we were missing the 1/43 option. But now, it's finally going to be possible! Tameo Kits has just announced its development within its special series of Formula 1 World Champions... and the 1972 champion couldn't be missing from its catalogue.
Click here for more details

ScaleLab 24: Detail up set 1/24 scale - Porsche 911 991 GT3 RSR - CNC metal parts, paint masks, photo-etched parts, resin parts and assembly instructions - for Nunu reference PN24040

ScaleLab 24 Reference: SL02-043

Complete photo-etched parts set for Nunu's Porsche 911 991 GT3 RSR kit, including several photo-etched parts, resin parts and masks. More details to follow soon.
Click here for more details

Reji Model: Logotypes 1/24 scale - Opel Ascona 400 Group 4 Opel Rally Team sponsored by Rothmans - Monte Carlo Rally - Rallye Automobile de Monte-Carlo 1982 - water slide decals, placement instructions and tobacco sponsor decals - for Belkits references BEL020 and BEL-020

Reji Model Reference: REJI-406

Supplementary decal sheet with the tobacco advertising logos not included in the decal sheet of the Belkits kit of the Opel Ascona 400 that competed in the Monte-Carlo Rally in 1982.
Click here for more details
Stone Models: Tyre set 1/20 scale - McLaren MP4/8 Goodyear rain tires 1993 - 3D printed parts - for Tamiya references TAM20039 and TAM25172 - 4 units image

Stone Models: Tyre set 1/20 scale - McLaren MP4/8 Goodyear rain tires 1993 - 3D printed parts - for Tamiya references TAM20039 and TAM25172 - 4 units

Stone Models Reference: A084-2024

Set of 4 Goodyear Formula 1 rain tyres in the design used in the 1993 season. The tyres have additional side markings and are modelled as closely as possible to the real tyre. This set of tyres is not designed for a specific model, but can be fitted with relative ease to the Tamiya kit of the McLaren MP4/8, although it may be necessary to adapt the rims of the kit to fit the tyres. Rims not included. With this set of tyres it is possible to reproduce the car used by Ayrton Senna at Donington in 1993, where he achieved victory, and where he carried out his "Lap of the Gods", overtaking four drivers in terrifying conditions on the first lap to take first place.
Click here for more details
USCP: Rims and tyres set 1/24 scale - Maxilite 16 inches - 3D printed parts and rubber parts - for Tamiya references TAM24188 and TAM89677 - 4 units image

USCP: Rims and tyres set 1/24 scale - Maxilite 16 inches - 3D printed parts and rubber parts - for Tamiya references TAM24188 and TAM89677 - 4 units

USCP Reference: 24P189

1/24 scale 3D printed resin wheel set designed to perfectly fit the different Tamiya Alfa Romeo Giulia kit references. The design is similar to the 16 inch Maxilite rims. Adapters are also included to use this rim set on any Aoshima, Fujimi, Hasegawa or Tamiya kits. Please note, tires are included!
Click here for more details
Fujimi: Car scale model kit 1/24 scale - Mercedes Benz SLS AMG - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Fujimi: Car scale model kit 1/24 scale - Mercedes Benz SLS AMG - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Fujimi Reference: FJ123929

The AMG- powered version of one of Mercedes' most elegant sports cars, now available as a scale kit by Fujimi. Inside the box you'll find an easy-to-build scale model thanks to the carefully designed parts brreak up, along with a set of photo-etched parts that will give your model greater detail.
Click here for more details

Fujimi: Car scale model kit 1/20 scale - Ferrari F2003-GA Scuderia Ferrari Team sponsored by Shell Vodafone #1, 2 - Michael Schumacher, Rubens Barrichello - Spanish Formula 1 Grand Prix, Italian Formula 1 Grand Prix, Japanese Formula 1 Grand Prix, Monaco Formula 1 Grand Prix 2003 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Fujimi Reference: FJ092096

A single-seater with a lot of history, as it was the one that allowed Schumacher to win his sixth world championship title and beat the record that Fangio had held for 46 long years. Fujimi has honored such an important piece of history with a model full of details and with a wonderful exploded view, including its atmospheric engine type 052 V10 at 90º with a displacement of 3.0 liters. Glory to the ears!
Click here for more details

Fujimi: Car scale model kit 1/20 scale - McLaren Honda MP4/5 McLaren Racing Limited Team sponsored by Marlboro Shell #1, 2 - Ayrton Senna da Silva, Alain Prost - Spanish Formula 1 Grand Prix 1989 - paint masks, plastic parts, rubber parts, water slide decals, assembly instructions and does NOT include tobacco sponsor decals

Fujimi Reference: FJ091938

Connoisseurs of the matter have always said that the MP4/5 was the most charismatic F1 that Senna drove. Fujimi has made the MP4/5 a very elegant kit with a very careful exploded view and a detailed engine. Beware, the Marlboro advertising does not come on the model.
Click here for more details
Profil24: Car scale model kit 1/24 scale - Ferrari 499P LMH AF Corse Team sponsored by Richard Mille #83 - Robert Kubica (PL) + Robert Shwartzman (IL) + Yifei Ye (CN) - 24 Hours Le Mans 2024 - photo-etched parts, resin parts, rubber parts, seatbelt fabric, vacuum formed parts, water slide decals, other materials, assembly instructions and painting instructions image

Profil24: Car scale model kit 1/24 scale - Ferrari 499P LMH AF Corse Team sponsored by Richard Mille #83 - Robert Kubica + Robert Shwartzman + Yifei Ye - 24 Hours Le Mans 2024 - photo-etched parts, resin parts, rubber parts, seatbelt fabric, vacuum formed parts, water slide decals, other materials, assembly instructions and painting instructions

Profil24 Reference: P24149

Apart from the two units of the "official" Ferrari team, in 2024 there has been a third unit of the Ferrari 499P in the 24 Hours of Le Mans, with a decoration that is perhaps more striking in an intense yellow color. Profil24 has already announced to us that this unit will also be available in its catalog at a 1/24 scale, so that your grid of the legendary 24 Hours is complete.
Click here for more details
USCP: Seat 1/24 scale - Ferrari 550 Maranello seats - 3D printed parts and resin parts - for Fujimi references FJ12237, RS-6, FJ12270, FJ126531 and RS-117 - 2 units image

USCP: Seat 1/24 scale - Ferrari 550 Maranello seats - 3D printed parts and resin parts - for Fujimi references FJ12237, RS-6, FJ12270, FJ126531 and RS-117 - 2 units

USCP Reference: 24A090

Pair of resin seats to replace those of your Ferrari 550 Maranello model, or even similar models such as the 575M. The set includes a whole series of 3D printed parts, where you can find not only complementary details for the seats, but also other interior elements, such as the braces to hold loads on the rear shelf, the metal grille and various types of gear lever knob, the handbrake lever or a load securing net.
Click here for more details
Stone Models: Tyre set 1/20 scale - Bridgestone Rain Tires (2005-2009) - 3D printed parts - 4 units image

Stone Models: Tyre set 1/20 scale - Bridgestone Rain Tires (2005-2009) - 3D printed parts - 4 units

Stone Models Reference: A085-2024

Set of 4 Bridgestone Formula 1 rain tyres in the design used between the 2005 and 2009 seasons. The tyres have additional side markings and are modelled as closely as possible to the real tyre. This tyre set is not designed for a specific model and it may be necessary to adapt the rims of the kit to fit the tyres. Rims not included.
Click here for more details
Fujimi: Car scale model kit 1/20 scale - Williams Renault FW16 Williams Grand Prix Engineering Team sponsored by ELF #0, 2 - Damon Hill (GB), Ayrton Senna da Silva (BR) - San Marino Formula 1 Grand Prix 1994 - paint masks, plastic parts, rubber parts, water slide decals, assembly instructions, painting instructions and does NOT include tobacco sponsor decals image

Fujimi: Car scale model kit 1/20 scale - Williams Renault FW16 Williams Grand Prix Engineering Team sponsored by ELF #0, 2 - Damon Hill, Ayrton Senna da Silva - San Marino Formula 1 Grand Prix 1994 - paint masks, plastic parts, rubber parts, water slide decals, assembly instructions, painting instructions and does NOT include tobacco sponsor decals

Fujimi Reference: FJ090580

Limited-time re-edition of the Williams Renault FW16 kit as driven in 1994 by Ayrton Senna and Damon Hill at the 1994 San Marino Grand Prix. The kit allows the cockpit and engine to be reproduced in great detail, with the engine being visible by removing the cover. The tobacco logos are not included in the kit.
Click here for more details
Fujimi: Car scale model kit 1/24 scale - Porsche Cayman - paint masks, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Fujimi: Car scale model kit 1/24 scale - Porsche Cayman - paint masks, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Fujimi Reference: FJ12696

New Fujimi reference that will allow you to choose between the conventional version or the more equipped "S" version of the Porsche Cayman. The kit comes with two sets of rims so you can reproduce the version you like best, and with masks to easily paint the window frames.
Click here for more details

Hasegawa: Car scale model kit 1/24 scale - Benetton Ford B190 Benetton Formula Ltd Team sponsored by Autopolis #19, 20 - Roberto Moreno, Nelson Piquet, Alessandro Nannini - Japanese Formula 1 Grand Prix, Monaco Formula 1 Grand Prix 1990 - plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Hasegawa Reference: 20340

Limited re-edition of the Hasegawa Benetton Ford B190 kit at 1/24 scale. The decals on the kit allow you to reproduce the decoration of the car with which Nelson Piquet won the 1990 Japanese Grand Prix, held at the Suzuka circuit. Also included are the logos necessary to reproduce the version used in the Monaco Grand Prix. The kit is made up of 75 pieces,
Click here for more details
Hasegawa: Van scale model kit 1/24 scale - Volkswagen Transporter Type 2 Micro Bus with roof carrier - photo-etched parts, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Hasegawa: Van scale model kit 1/24 scale - Volkswagen Transporter Type 2 Micro Bus with roof carrier - photo-etched parts, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Hasegawa Reference: 20689

Surely many of us have found ourselves in the situation where the more cargo space we have in our vehicle, the more we fill it and we run out of space again... and even in a vehicle as spacious as the Volkswagen Transporter this also happened. That is why it was common to see a roof carrier mounted on the roof to carry even more belongings. This new reference of the Transporter T2 Hasegawa kit includes, in addition to the basic parts list already known, a photo-etched plate to be able to reproduce and incorporate the roof carrier. Do you already know what you are going to put on top?
Click here for more details
Hasegawa: Car scale model kit 1/24 scale - Mazda 767B Mazdaspeed Team #77 - Yoshimi Katayama (JP) + Takashi Yorino (JP) + Elliot Forbes-Robinson (US) - 24 Hours of Daytona 1989 - 3D printed parts, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Hasegawa: Car scale model kit 1/24 scale - Mazda 767B Mazdaspeed Team #77 - Yoshimi Katayama + Takashi Yorino + Elliot Forbes-Robinson - 24 Hours of Daytona 1989 - 3D printed parts, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Hasegawa Reference: 20691

New reference based on the classic Hasegawa kit of the Mazda 767B, in this case with the decals that allow the creation of the version that participated in the 1989 24 Hours of Daytona, achieving fifth final position. As a novelty, the kit includes some 3D printed parts, such as the exterior mirrors or the cooling intakes for the rear brakes on the engine cover.
Click here for more details
Hasegawa: Car scale model kit 1/24 scale - Mazda Savanna RX-7 SA22C Mazda Technical Center Team #7 - Yoshimi Katayama (JP) + Yojiro Terada (JP) + Takashi Yorino (JP) - 24 Hours of Daytona 1979 - paint masks, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions image

Hasegawa: Car scale model kit 1/24 scale - Mazda Savanna RX-7 SA22C Mazda Technical Center Team #7 - Yoshimi Katayama + Yojiro Terada + Takashi Yorino - 24 Hours of Daytona 1979 - paint masks, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Hasegawa Reference: 21146

Mazda achieved worldwide fame after its victory in the 24 Hours of Le Mans, but that does not mean that it had previously achieved other important successes outside of Japan. In 1979 the small coupé RX-7 achieved victory in the GTU category at the 24 Hours of Daytona, also achieving fifth place overall. The Hasegawa scale kit allows this version to be reproduced, with extensive detailing of the interior, the lower part of the chassis and the suspensions, and with exquisite fittings. The kit also includes masks to paint the window frames.
Click here for more details
Hasegawa: Motorbike scale model kit 1/12 scale - Honda NSR500 ROC Team sponsored by Elf #7 - Dominique Sarron (FR) - Motorcycle World Championship 1989 - metal parts, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions image

Hasegawa: Motorbike scale model kit 1/12 scale - Honda NSR500 ROC Team sponsored by Elf #7 - Dominique Sarron - Motorcycle World Championship 1989 - metal parts, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Hasegawa Reference: 21715

In addition to the official bikes, the Honda NSR500 was also used by several private teams, who found the perfect mount to participate and be competitive in the 500cc World Championship. One of these participating riders was Dominique Sarron, aboard the beautiful motorcycle decorated in the Elf colors, which you can now reproduce with this limited edition, maintaining the extensive part list and detail of the other references of the Hasegawa kit.
Click here for more details