Newsletter 629: GT3 RS

Sometimes the wait can be worth it! Details are still scarce, but Tamiya has confirmed that one of its upcoming releases will be the GT3 RS version of the 992 generation Porsche 911. Given the detail Tamiya has put into its other supercar models in the past, we can't wait to find out more about this kit. What great news!

Complete set, which allows to assemble up to four units, of the extinguishing system used in competition vehicles. It includes 4 cylinders of the equivalent size to 4,25 litre extinguishers, and all the necessary accessories for a fixed extinguishing system, whether manual or automatic. In addition, the set includes two different types of control units, 3 different types of automatic activation valves, activation buttons and handles, lever-type activator, pressure indicators, quick connectors for extinguishing tubes, sprinklers, a set of decals with different options and a metre of wire to install the fixed extinguishing system, all designed by Decalcas at 1/24 scale. With this product you will give a greater dose of realism to the interior of your vehicles! With the usual quality of Decalcas products, and the convenience of not needing to use a primer, avoiding the loss of detail of the pieces, you will only have to paint and assemble the pieces on your scale model.

Complete set, which allows to assemble up to four units, of the extinguishing system used in competition vehicles. It includes 4 cylinders of the equivalent size to 2,8 litre extinguishers, and all the necessary accessories for a fixed extinguishing system, whether manual or automatic. In addition, the set includes two different types of control units, 3 different types of automatic activation valves, activation buttons and handles, lever-type activator, pressure indicators, quick connectors for extinguishing tubes, sprinklers, a set of decals with different options and a metre of wire to install the fixed extinguishing system, all designed by Decalcas at 1/24 scale. With this product you will give a greater dose of realism to the interior of your vehicles! With the usual quality of Decalcas products, and the convenience of not needing to use a primer, avoiding the loss of detail of the pieces, you will only have to paint and assemble the pieces on your scale model.

Set of 700 screws with bolt with nut, such as those used in the assembly of mechanical parts and components. of diameters of 0,5mm, 0,6mm, 0,7mm, 0,8mm, 0,9mm, 1mm and 1,1mm (100 units of each of the different measurements), with which to detail any part where this is located type of screws in your vehicles. With the usual quality of Decalcas products, and the convenience of not needing the use of primer, avoiding the loss of detail of the pieces, you will only have to paint and assemble the pieces on your scale model.

Set of 700 cylindrical head screws with Allen head as used in the assembly of mechanical parts and components, of diameters of 0,5mm, 0,6mm, 0,7mm, 0,8mm, 0,9mm, 1mm and 1,2mm (100 units of each of the different measurements), with which to detail any part where this is located type of screws in your vehicles. With the usual quality of Decalcas products, and the convenience of not needing the use of primer, avoiding the loss of detail of the pieces, you will only have to paint and assemble the pieces on your scale model.

Decal sheet to reproduce the version of the Opel Acona 400 that finished in fourth position in the 1981 edition of the Monte Carlo Rally.

Set of 3D printed parts, which will allow you to fully detail the interior under the front hood of the Alpine A110 Tamiya kit in its rally version, with a different configuration of the components to that of the street version. Among others, it includes the spare wheel, the battery, the fuel tank in a lower position or the liquid tanks. In addition, the detail of the hinges in two pieces, including those of the rear hood, will allow you to articulate both hoods in a controlled manner exactly like the real car. How well thought out!

This assembled model reproduces the version of the McLaren MCL60 used at the 2023 Monaco Grand Prix, where McLaren presented a very special livery as part of its 60th anniversary celebrations. This livery honors the Triple Crown achieved by McLaren by winning the three most prestigious races in motorsports: the 1974 Indianapolis 500 with Johnny Rutherford, the 1984 Monaco Grand Prix with Alain Prost and the 24 Hours of Le Mans in 1995 with JJ Lehto, Yannick Dalmas. and Masanori Sekiya. With it, Lando Norris achieved some valuable points for the McLaren team with his ninth position. Precious!

What a great second half of McLaren's season in 2023, with a car that radically changed its sensations and performance compared to what was seen at the beginning of the year. This assembled model reproduces the version with which Oscar Piastri achieved fourth position in the English Grand Prix held at the Silverstone circuit, confirming the improved performance of the McLaren, and achieving what at that time was his best result in F1. .

What a great second half of McLaren's season in 2023, with a car that radically changed its sensations and performance compared to what was seen at the beginning of the year. This assembled model reproduces the version with which Lando Norris achieved second position in the British Grand Prix held at the Silverstone circuit, after leading for a few laps thanks to a sensational start. A result that tasted like glory at McLaren!

The Porsche 964 Carrera 3.8 RSR was a very limited production version (in fact, only 55 units were manufactured) launched by Porsche in order to homologate the competition version. At the same time that the latter was reaping victories on circuits around the world, the street version became a very popular rarity among Porsche lovers.

Set of footpegs to replace the ones that come on Tamiya kits. The design corresponds to that of various motorcycles from the 90s and 2000s, and allows four different versions to be made (Yamaha YZR 1999, Honda RC211V 2002 Rossi, Yamaha M1 2004 and 2005 Rossi, and the Honda RC211V 2006).

Hyper realistic chain to be assembled one link at a time. Your 1/9 motorbike scale models will look MUCH more realistic once you equip them with this beauty.

The Chaparral 2J is one of the most revolutionary models of Jim Hall, founder of Chaparral Cars, who had the brilliant idea of mounting a fan in the rear of the car that would extract air from its lower area, which had to be suitably sealed. to increase the ground effect. A true icon of the 70s, where the craziest and coolest ideas were put into practice in cars without any type of limitation. This kit includes the usual Model Factory Hiro parts list in this scale, and once assembled, it allows you to see all the details of the interior and the mechanical part thanks to its openable front and rear doors and hoods. The rims, exhaust outlets and instrument panel clocks are made of turned aluminium. Other details include the tires with pre-painted manufacturer's markings, and the decal set printed by Cartograf. Spectacular!

Set of tools and other supplies used by most F1 teams in the 1980s, so you can recreate a scene in the pits in detail. The tools reproduced include a laptop computer, batteries, tire carrier, cylinder, intercom, timing table, handheld printer, pneumatic impact wrench, stands, spray cans and an oil can. The pieces are made mostly of white metal, and decals and cables are included.

Set of tools and other supplies used by most F1 teams in the 1980s, so you can recreate a scene in the pits in detail. The tools reproduced include a laptop computer, two starter batteries, intercom, timing table, pressure gauge, handheld printer, pneumatic impact wrench, stands, spray cans.... The pieces are made mostly of white metal, and decals and cables are included.

Photo-etched sheet that will allow you to detail any of the Hasegawa references of the Nissan Skyline GT-R BNR32 Group A kit.

This kit allows you to reproduce the version that won the second round held at the Brands Hatch circuit corresponding to the second event of the British Touring Car Championship, better known as BTCC, in the 1996 season. The Supertouring cars were already beginning to show much more aerodynamic elements. evolved, with very elaborate front spoilers and rear wings, and widened the wheel archs to accommodate the increasingly larger tires. BMW with its 320i won five races in the 1996 season, dominated with an iron fist by the Audi A4 with its all-wheel drive.

The "Exclusive" edition is much more than the book full of great reference photos of the Lancia Rally 037 Group B. or the series of 20 exclusive plates... and it is for the most passionate about one of the most fantastic Italian cars of all-time rally RC Books has prepared something truly special... and exclusive! Apart from some impressive large prints, 1/24 scale reproduction of the 037 STRADALE chassis will be included, which will delight even the most detailed enthusiasts. So if you are one of those unconditional lovers of the Lancia 037, do not hesitate, since this edition will be very reduced, and unrepeatable!

The "Exclusive" edition is much more than the book full of great reference photos of the Lancia Rally 037 Group B. or the series of 20 exclusive plates... and it is for the most passionate about one of the most fantastic Italian cars of all-time rally RC Books has prepared something truly special... and exclusive! Apart from some impressive large prints, 1/24 scale reproduction of the 037 EVO1 chassis will be included, which will delight even the most detailed enthusiasts. So if you are one of those unconditional lovers of the Lancia 037, do not hesitate, since this edition will be very reduced, and unrepeatable!

The "Exclusive" edition is much more than the book full of great reference photos of the Lancia Rally 037 Group B. or the series of 20 exclusive plates... and it is for the most passionate about one of the most fantastic Italian cars of all-time rally RC Books has prepared something truly special... and exclusive! Apart from some impressive large prints, 1/24 scale reproduction of the 037 EVO2 chassis will be included, which will delight even the most detailed enthusiasts. So if you are one of those unconditional lovers of the Lancia 037, do not hesitate, since this edition will be very reduced, and unrepeatable!

Liquid mask, ideal for masking small areas, curved surfaces and complex shapes where it is not easy for masking tape to adhere. In addition, it is easy to use, since it can be applied directly from the nozzle of the bottle. Liquid mask can be used over and under different types of paint, such as acrylics, enamels and lacquers. Liquid mask can also be easily cut with a cutter blade. After applying it, the liquid mask will be dry in about 30 minutes.

Complete transkit to be able to make the version of the Porsche 911 winner of the 1973 24 Hours of Daytona. Scale Production has given this reference a twist, now also including the rear engine cover with the ducktail spoiler and the decals. Other parts, such as the rims or the interior fire extinguisher, are made using 3D printing. The transkit is developed to be used based on the Fujimi Porsche 911, although the ideal would be the '73 Porsche 911 RS Enthusiast series to have the most accurate engine.

If you are a Formula 1 lover and you like builds with lots of visible parts, THIS is your scale model: detailed engine, functional pontoons, and a splendid parts break up. Absolutely essential.

Detail up set for the McLaren MP4/2B TAG Porsche featuring carbon fibre pattern decals, seatbelt fabrics and photoetched parts for grids, spoilers, etc... ¡¡¡¡Brilliant!!!!

Beautiful kit of the even more beautiful Brabham BT52 as it took part in the Monaco Grand Prix in 1983, where Nelson Piquet finished in second place, while Riccardo Patrese had to retire. At the end of the season, Piquet won his second drivers' title. A very complete kit with extensive number of parts, including its powerful BMW M12 Turbo 4-cylinder inline engine with a displacement of only 1.5 litres. Don't miss it!!

Limited time re-edition of the very complete photo-etched parts sheet designed for the Alfa Romeo Giulia Sprint GTA Tamiya kits. Not only are the typical parts included to improve the detail of the grilles, brakes or windscreen wipers, but you can also find other incredible details such as the front of the radio, the chrome mouldings of the interior panels, different emblems... it even comes with the car keys! Without a doubt, essential to complete your model!

High quality resin kit to make the version of Ken Miles' powerful AC Cobra 427, with which he participated in the Nassau Tourist Trophy in 1964. This version of the Cobra mounted a smaller front windshield deflector (called "flip-top") on instead of the framed windshield of other versions. The kit also includes several photo-etched plates and white metal parts, so you can assemble the model with a great amount of detail.

1/24 scale 3D printed resin wheel set designed to perfectly fit the different Tamiya Alfa Romeo Giulia kit references. The design is similar to the 16 inch Maxilite rims. Adapters are also included to use this rim set on any Aoshima, Fujimi, Hasegawa or Tamiya kits. Please note, tires not included! Images with tires are for example only.

Incredibly detailed kit, made up of parts made of multiple materials, such as white metal, resin, photo-etched parts, turned aluminium parts such as the rims or the engine intake trumpets, rubber tyres with pre-painted logos, decals printed by Cartograf, and other elements such as cables or tubes to accurately reproduce the original vehicle. This reference reproduces the single-seater used by Jean-Pierre Beltoise in the Monaco GP, the third round of the 1968 season, a race in which Matra made its debut as an engine supplier, mounting the powerful 60º V-12 engine. In this version, the shape of the nose and the configuration of the exhaust system with six tailpipes are specific to this first race.

Incredibly detailed kit, composed of parts made of multiple materials, such as white metal, resin, photo-etched parts, turned aluminium parts such as the rims or the engine intake trumpets, rubber tires with pre-painted logos, decals printed by Cartograf, and other elements such as cables or tubes to accurately reproduce the original vehicle. This reference reproduces the single-seater used by Jean-Pierre Beltoise in the Dutch GP held at the Zandvoort circuit, the fifth round of the 1968 season. In this race the MS11 with a Matra engine finished on the podium for the first time, achieving second position. In this version the shape of the body and the four exhaust pipes, as well as the oil cooler on the side of the body, differentiate it from other versions.

Incredibly detailed kit, made up of parts made of a variety of materials such as white metal, resin, photo-etched parts, turned aluminium parts such as the rims and engine intake trumpets, rubber tyres with pre-painted logos, decals printed by Cartograf, and other elements such as cables and tubes to accurately reproduce the original vehicle. This reference reproduces the single-seater used by Jean-Pierre Beltoise at the French GP held at the Rouen-Les-Essarts circuit, the sixth round of the 1968 season. This version is characterised by the mounting of additional tanks on both sides of the body, which modify its shape, and by the short rear spoiler mounted on the rear axle.

Incredibly detailed kit, made up of parts made of multiple materials, such as white metal, resin, photo-etched parts, turned aluminium parts such as the rims or the engine intake trumpets, rubber tyres with pre-painted logos, decals printed by Cartograf, and other elements such as cables or tubes to reproduce the original vehicle with great precision. This reference reproduces the single-seater used by Jean-Pierre Beltoise in the Italian GP held at the Monza circuit, the ninth round of the 1968 season. This version is characterised by the mounting of additional tanks on both sides of the body, although the extensions are shorter. The fairing on the top is also modified. Although perhaps the most characteristic elements of this version are the two planes that make up the front spoiler, together with the high-type rear spoiler mounted on the rear axle.

The combination of the pieces of the gas cap set will allow you to assemble 2 units of each of the 3 different designs (6 caps in total). Once assembled, the caps can be opened.

Templates and concentric guide for painting the Goodyear or Firestone logos, as well as the colored tire contour lines found on 1960s Formula 1 tires. Includes different templates and guides for front and rear tires . Indispensable for modellers who love vintage F1!

Templates for painting Goodyear logos on Formula 1 tires from the 1970s. Designed to fit Tamiya model tires but can be used with other brands. Includes different templates for the front and rear tires . It does not include the Eagle word template, which was not used in the 70s.

Templates for painting the Goodyear-Eagle logos on Formula 1 tires from the 1980s. Designed to fit Tamiya model tires but can be used with other brands. Includes different templates for the front and rear tires .