Newsletter 621: BAC Mono

This 1/24 scale kit includes a detailed interior, engine, suspension, wheels and tires to make the BAC Mono. The kit does not have an assembly manual, but it is easy to assemble. It is recommended to build it starting with the chassis and rear suspension, and leave the body as the last piece to be glued during assembly.

The complete guide to Truck Modeling is a book (published in English) considered one of the most comprehensive guide for truck modeling nowadays. Featuring 176 pages and more than 500 pictures illustrating on assembly, detailing, painting, and weathering effects on tractors and European and American trucks. The pictures in the book just speak for themselves.

If Ferrari has done it again... why wouldn't Profil24 do it too? Ferrari has once again achieved victory in the 24 Hours of Le Mans with the unit with the number #50 of its evolved 499P, and Profil24 has already confirmed to us that shortly, they will also have the version of the Le Mans champion in 2024. Fabulous!

Apart from the two units of the "official" Ferrari team, in 2024 there has been a third unit of the Ferrari 499P in the 24 Hours of Le Mans, with a decoration that is perhaps more striking in an intense yellow color. Profil24 has already announced to us that this unit will also be available in its catalog at a 1/24 scale, so that your grid of the legendary 24 Hours is complete.

Re-edition, by Domino, of one of the most sought-after Tamiya kits, the Ford Escort RS Cosworth Group A, and with a new decoration corresponding to the one that, driven by Francois Delecour, achieved second place in the rally of Monte Carlo in 1995. The kit maintains the same parts list as the original kit, with the 17-inch OZ rims with slick tires. The 16-inch Enkei rims with snow tires on the box cover are not included in the kit. A unique opportunity to get this fantastic kit!

This set of carbon fibre patterns for the Tamiya kit of the Suzuki RGV-Gamma XR-89 is composed of two decal sheets. Each of the decal sheets has a template printed on the back with the patterns, which must be cut out, and which correspond perfectly with the corresponding pieces of the kit. Each of the carbon fibre patterns is identified with the number of the part of the kit on which it has to be placed. The set has a total of 28 carbon templates.

This set of carbon fibre patterns for the Tamiya model of the Kawasaki ZZR 1400 is composed of two decal sheets . Each of the decal sheets has a template printed on the back with the patterns, which must be cut out, and which correspond perfectly with the corresponding pieces of the model. Each of the carbon fibre patterns is identified with the number of the part of the model on which it has to be placed. This set of decals will allow you to "dress" the complete motorcycle in carbon fibre .

This set of carbon fibre patterns for the Tamiya kit of the Gordon Murray GMA Type 50 is composed of two decal sheets, allowing you to completely "dress" the body of the GMA T.50 in silver twill weave carbon fibre and transparent, so that the color of the bodywork shines through the decal. Each of the decal sheets has a template printed on the back with the patterns, which must be cut out, and which correspond perfectly with the pieces of the kit. The set includes a total of 14 carbon templates.

This set of carbon fibre patterns for the Tamiya kit of the Gordon Murray GMA Type 50 is composed of two decal sheets, allowing you to completely "dress" the body of the GMA T.50 in pewter metallic twill weave carbon fibre. Each of the decal sheets has a template printed on the back with the patterns, which must be cut out, and which correspond perfectly with the pieces of the kit. The set includes a total of 14 carbon templates.

Coppery gold tone, like the one present in many metal parts and special alloy finishes, ideal for increasing the chromatic variety when painting the mechanical parts of your models.

Intense yellow tone, with a highly saturated pigment, similar to that used in vehicles sponsored by the Volt Racing team.

Metallic green tone, similar to the one used in the Lamborghini Miura P400 SV Chassis 4846. This color is appropriate to use in Hasegawa kits.

Set of four hand-held fire extinguishers printed at 1/24 scale, which reproduce the extinguishers installed in numerous competition vehicles. Decals are included with the use and inspection labels of different fire extinguisher manufacturers, such as Sparco, OMP or LifeLine. With this extinguisher you will give a greater dose of realism to the interior of your vehicles as they are parts normally located in a very visible place and that lack detail in commercial kits, or are simply not included. As usual at DECALCAS, it is produced in resin using 3D printing with maximum resolution detail.

Fantastic 1/12 scale reproduction of the Mclaren F1 GTR used by the Bigazzi team in its participation in the 24 Hours of Le Mans in 1996. The kit includes the usual Model Factory Hiro exploded view in this scale, and once assembled, the model allows you to see all the details of the interior and the mechanical part thanks to its openable doors and front and rear hoods. It also allows the side covers to be removed for access to its mechanical components and air ducts. Quite an engineering job!

The HG Super Fine airbrush allows you to spray with maximum precision, allowing you to paint lines less than 0.5 mm wide. The paint container has a capacity of 3 ml, and is integrated into the main body of the airbrush. Its simple and lightweight design helps make spraying paint easy and stable. The diameter of the airbrush nozzle is 0.2 mm.

The HG III dual-action airbrush allows you better control of paint spraying. Its 0.3 mm diameter nozzle allows you to paint fine lines less than 1 mm thick, and its newly designed trigger makes it comfortable and easy to use. The Airbrush III can be used to carry out different painting styles and techniques, such as shading and grading, as well as applying paint widely and brilliantly, always producing beautiful finishes. The materials used in the airbrush allow it to be used with acrylic paints, enamels and lacquers.

Airbrush with trigger-type drive mechanism and integrated cup with a capacity of 7 cubic centimetres. The diameter of the nozzle is 0.3 mm, which makes it very versatile, being able to paint lines less than 1 mm wide to paint larger surfaces. Its double action system allows fine adjustment of the spray volume.

Airbrush with trigger-type drive mechanism, and a super fine 0.2 mm nozzle that allows you to paint the most precise details. The airbrush features an ergonomic design with a modern metallic finish. The paint cup, with a capacity of 7 cubic centimetres, has lips to prevent possible paint spills while handling the airbrush.

New issue of the Ultra Detail Guides series, this time about the impressive McLaren Honda MP4/5b. Includes a total of 126 A5-sized pages with full-color pictures taken of the vehicle nowadays. It is an essential reference book for building all Tamiya scale models.

Set with 8 fixed and hand-held fire extinguishers (4 of each type) at 1/24 scale, which reproduce the CI-O-DUE fire extinguishers used in the Lancia Stratos. A set of decals and cable are included to install the fixed extinguishing system. With this set of fire extinguishers you will give a greater dose of realism to the interior of your Lancia Stratos, as they are pieces located in a very visible place in the passenger compartment and which in the model lack detail, not even including the fixed fire extinguisher or decals for the fire extinguishers. As usual at DECALCAS, it is produced in resin using 3D printing with maximum resolution detail.

Set of 600 hexagonal domed cap screws with diameters of 0,5mm, 0,6mm, 0,7mm, 0,8mm, 1mm and 1,25mm (100 units of each of the different sizes), with which to detail any part or piece of your models where these types of screws are found.

Set of 600 hexagonal flange bolts with diameters of 0,5mm, 0,6mm, 0,7mm, 0,8mm, 1mm and 1,25mm (100 units of each of the different sizes), with which to detail any part or piece of your models where these types of screws are found.

Set of 600 hexagonal domed cap screws with washer with diameters of 0,5mm, 0,6mm, 0,7mm, 0,8mm, 1mm and 1,25mm (100 units of each of the different sizes), with which to detail any part or piece of your models where these types of screws are found.

Set of 600 slotted cheese head screws with diameters of 0,5mm, 0,6mm, 0,7mm, 0,8mm, 1mm and 1,25mm (100 units of each of the different sizes), with which to detail any part or piece of your models where these types of screws are found.

Product made entirely with 3D printing equipment designed for advanced modelers looking to go further with their models. Decals are included for the Dakar in 1985, where it was one of BMW's assistance trucks, which achieved victory in the motorcycle category. Once assembled, the truck measures almost 24 cm long. This product, available at SpotModel, belongs to a limited series as it is a handmade product.

Product made entirely with 3D printing equipment designed for advanced modelers looking to go further with their models. Decals are included for the 1986 Dakar, where the MAN 6x6 of the Dunova team was forced to abandon. Once assembled, the truck measures almost 24 cm long. This product, available at SpotModel, belongs to a limited series as it is a handmade product.

Product made entirely with 3D printing equipment designed for advanced modelers looking to go further with their models. Decals are included for the 1984 Dakar, where this truck obtained third position in its category. Once assembled, the truck measures almost 24 cm long. This product, available at SpotModel, belongs to a limited series as it is a handmade product.

The Chaparral 2J is one of the most revolutionary models of Jim Hall, founder of Chaparral Cars, who had the brilliant idea of mounting a fan in the rear of the car that would extract air from its lower area, which had to be suitably sealed. to increase the ground effect. A true icon of the 70s, where the craziest and coolest ideas were put into practice in cars without any type of limitation. This kit includes the usual Model Factory Hiro parts list in this scale, and once assembled, it allows you to see all the details of the interior and the mechanical part thanks to its openable front and rear doors and hoods. The rims, exhaust outlets and instrument panel clocks are made of turned aluminium. Other details include the tires with pre-painted manufacturer's markings, and the decal set printed by Cartograf. Spectacular!

Limited re-edition of the Hasegawa Benetton Ford B190B kit at 1/24 scale. Regarding the 1990 season, the decoration of the Benetton used in 1991 turned towards a striking yellow color, in addition to starting to use Pirelli tires and OZ rims. The decals on the kit allow us to reproduce the decoration of the car with which Nelson Piquet achieved third position in the 1991 United States Grand Prix, held at the Phoenix street circuit.

Andrea Aghini could not miss the World Rally Championship event held in Italy. In the 2000 edition he participated with a Mitsubishi Lancer Evo VI of Group A, also called by Mitsubishi as Carisma GT, achieving fifteenth final position and third among the drivers of the Italian Championship. This is precisely the version chosen by Hasegawa for this reference, which includes a photo-etched plate for details such as the pedals, the windshield wipers, the bonnet latches or the harness buckles, as well as a mask template for painting the windows..

Lancia dominated the rallies around the world with the Group A Delta, but the competition became increasingly tight, and in response, in 1989 the Delta engine began to have a 16-valve cylinder head, also causing the appearance of the recognizable " hump" on the front hood. The HF Integrale 16V version was born, which this Hasegawa kit allows to reproduce in its street version.

The classic Hasegawa Volkswagen Transporter T2 Delivery Van kit serves as a tribute base for lovers of the Japanese anime series "Yatterman", originally broadcast in Japan between 1977 and 1979. The kit includes a large sheet of decals with characters from the Serie. Also included in the box is an acrylic stand approximately 55 mm long by 30 mm wide.

Hasegawa has surprised us with a much improved reinterpretation of the Toyota Supra Gr.A compared to the existing ones from Fujimi and even Tamiya. A detailed interior and chassis, with perfect fit, will delight the most demanding modellers. Let yourself be surprised by the new Hasegawa kits!

Let's face it... who hasn't dropped their Micro Set or Micro Sol bottle while placing decals? Decalcas provides a stylish solution to this typical "problem", with a support inspired by the design of the intake trumpets of racing cars and motorcycles. The support has the exact dimensions to prevent your Micro Set and Micro Sol bottles and, in general, any bottle from the manufacturer Microscale from accidentally tipping over. And also, you can place your brushes while you place the decals in the hole intended for the injectors. An indispensable tool that is not only very useful, but will also add style to your work table.

White color similar to that used in the Ford factory to paint the Ford Escort RS WRC that were delivered to both individuals and the different rally teams. This color has been developed for use on Tamiya and Domino kits.

High quality resin kit to make the version of Ken Miles' powerful AC Cobra 427, with which he participated in the Nassau Tourist Trophy in 1964. This version of the Cobra mounted a smaller front windshield deflector (called "flip-top") on instead of the framed windshield of other versions. The kit also includes several photo-etched plates and white metal parts, so you can assemble the model with a great amount of detail.

Resin kit that will allow you to make the curious prototype presented by the AVS Shadow team for the Can-Am series, and which had the particularity of having airbraking devices. The Marsh Models kit, made of high-quality resin, also includes several photo-etched plates and white metal parts that allow the model to be assembled with a great amount of detail.

Perhaps this model may have been the biggest "craziness" that crossed the mind of the great Jim Hall, founder of Chaparral. This resin kit will allow you to assemble one of the prototypes of the 2H model, about which there are still doubts about where certain elements were mounted. The Marsh Models kit, made of high-quality resin, also includes several photo-etched plates and white metal parts that allow the model to be assembled with a great amount of detail.