Newsletter 616: Rallycross

Rallycross

Rallycross
The "Rallycross" is a rather peculiar type of race that is usually held on mixed dirt and asphalt circuits, with specific regulations where the races follow a process of elimination and classification by heats to define the winner in the big final race. Its beginnings date back to the 1960s, but it was in 2014 when the races began to be held worldwide under the tutelage of the FIA.

Currently these races use commercial street cars with homologations similar to Group A rallies, but with greater freedom that allows their engines reach well above 500 hp, sequential shifting, short gear ratios, soft tires... and their format with such short stages gives rise to spectacular head-to-head fights to gain positions as quickly as possible. In short... pure spectacle!!!

One of the veteran pilots of this modality is the Swede Per Eklund, with no less than 25 years in competition. In 1986, Eklund raced a Metro 6r4 with the Clarion Europe team, sponsored by Camel, whose Decalcas decoration for the Belkits model has just reached the SpotModel shelves... and we love it!!! Have you ever seen such a beautiful decoration on a car that is sooooo broken...?

Pure spectacle every week at SpotModel. :)

Decalcas: Marking / livery 1/24 scale - MG Metro 6R4 Clarion Europe Team sponsored by Camel #45 - Per Eklund (SE) - FIA European Rallycross Championship 1990 - water slide decals manufactured with digital technology, assembly instructions, painting instructions and tobacco sponsor decals - for Belkits references BEL015, BEL-015, BEL016 and BEL-016 image

Decalcas: Marking / livery 1/24 scale - MG Metro 6R4 Clarion Europe Team sponsored by Camel #45 - Per Eklund - FIA European Rallycross Championship 1990 - water slide decals manufactured with digital technology, assembly instructions, painting instructions and tobacco sponsor decals - for Belkits references BEL015, BEL-015, BEL016 and BEL-016

Decalcas Reference: DCL-DEC068

Before being a regular participant, and even becoming European champion of Division 1 in 1999, Per Eklund had the opportunity to test the adrenaline and the format of the Rallycross races during the event held in Sweden of the European Rallycross Championship in 1990, using for the occasion a beautiful MG Metro 6R4 completely decorated in Camel yellow, one of its usual sponsors. Decalcas has designed these decals, including the tobacco logos, to be used on the fantastic Belkits kits.
Click here for more details
Tamiya: Car scale model kit 1/24 scale - Gordon Murray Automotive GMA Type 50 - photo-etched parts, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions image

Tamiya: Car scale model kit 1/24 scale - Gordon Murray Automotive GMA Type 50 - photo-etched parts, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Tamiya Reference: TAM24364

We have been stunned by the announcement of the next Tamiya reference at 1/24 scale. A whole stratospheric supercar! And its first assembled image has just been made public at the Nuremberg Toy Fair, as have many of its features... We love that the rear area can be opened to reveal its Cosworth V12 engine, with its curious gullwing engine hood with double leaves reminiscent of classic vehicles. The model reproduces with great realism the most original element of the T.50, the large central rear fan with its internal ducts as in the real car. It also includes photo-etched parts to represent the rear bumper mesh sections, which are attached without the need for glue. In the case of the suspensions, the springs are molded as a separate part from the shocks, which increases realism and makes painting easier. And let's not forget the sheet metal transfers for some of the emblems. Without a doubt, a spectacular kit!
Click here for more details

Ixo Models: Diecast model car 1/18 scale - Austin Mini Cooper S #5 - Rauno Aaltonen + Tony Ambrose - Great Britain RAC Rally 1965 - plastic parts and rubber parts

Ixo Models Reference: DIE-60344

Assembled collector's model that reproduces the version of the Austin Mini Cooper S with which Rauno Aaltonen achieved victory in none other than the 1965 RAC Rally.
Click here for more details

Ixo Models: Diecast model car 1/18 scale - Opel Manta 400 sponsored by Texaco, Bastos #5 - Guy Colsoul + Alain Lopes - Ypres 24 Hours Rally 1985 - metal parts, plastic parts and rubber parts

Ixo Models Reference: DIE-60345

Assembled collector's model that reproduces the version of the Opel Manta 400 Group B with which Guy Colsoul achieved fifth position in the 1985 Ypres 24 Hours Rally.
Click here for more details

Ixo Models: Diecast model car 1/18 scale - Ford Escort Mk1 RS 1600 sponsored by Colibri Lighters #1 - Timo Mkinen + Henry Liddon - Lombard RAC Rally 1974 - metal parts, plastic parts and rubber parts

Ixo Models Reference: DIE-60346

Assembled collector's model that reproduces the version of the Ford Escort Mk1 RS 1600 with which Tomi Mkinen achieved victory in the 1974 Lombard RAC Rally.
Click here for more details

Ixo Models: Diecast model car 1/18 scale - BMW M3 E30 group A Linder Motorsport Team sponsored by Jagermeister #20 - Wayne Gardner - DTM Nrburgring 1992 - metal parts, plastic parts and rubber parts

Ixo Models Reference: DIE-60347

Assembled collector's model that reproduces the version of the BMW M3 E30 group A with which the 1987 Motorcycle World Champion Wayne Gardner participated in the 1992 DTM test held on the Nrburgring circuit.
Click here for more details
Number Five: Paint for airbrush - Tergal Yellow - 1 x 30ml - for Tameo Kits reference MTG010 image

Number Five: Paint for airbrush - Tergal Yellow - 1 x 30ml - for Tameo Kits reference MTG010

Number Five Reference: N5-X092

Intense yellow color tone similar to that used by the teams sponsored by Tergal, as was the case of many of the Escudera Montjuich competition vehicles.
Click here for more details
Number Five: Paint for airbrush - Beta Orange - 1 x 30ml - for Tameo Kits references TMK233, TMK235 and TMK313 image

Number Five: Paint for airbrush - Beta Orange - 1 x 30ml - for Tameo Kits references TMK233, TMK235 and TMK313

Number Five Reference: N5-X093

Intense orange color tone similar to that used in the competition vehicles sponsored by Beta Utensili, such as the famous March of the 70s.
Click here for more details
Shunko Models: Marking / livery 1/24 scale - Nissan Skyline GT-R R32 Group A Impul Team sponsored by Calsonic #1, 12 - Kazuyoshi Hoshino (JP) + Toshio Suzuki (JP), Kazuyoshi Hoshino (JP) + Masahiko Kageyama (JP) - Japan Touring Car Championship (JTCC) 1990 and 1993 - water slide decals and placement instructions - for Tamiya references TAM24102, TAM24109, TAM24113 and TAM24135 image

Shunko Models: Marking / livery 1/24 scale - Nissan Skyline GT-R R32 Group A Impul Team sponsored by Calsonic #1, 12 - Kazuyoshi Hoshino + Toshio Suzuki, Kazuyoshi Hoshino + Masahiko Kageyama - Japan Touring Car Championship (JTCC) 1990 and 1993 - water slide decals and placement instructions - for Tamiya references TAM24102, TAM24109, TAM24113 and TAM24135

Shunko Models Reference: SHK-D499

Shunko Models re-edits its complete decal sheet to make any of the Calsonic versions of the Nissan Skyline GT-R R32 Group A, designed to be used based on the Tamiya kit. Taking advantage of the occasion, the option for the 1990 season has also been incorporated, which was present separately in the reference SHK-D133. In addition, the design and some details of the logos have also been revised. Can you have a more complete option?
Click here for more details
Shunko Models: Marking / livery 1/24 scale - Mitsubishi Pajero Sonauto RalliArt Team sponsored by Citizen #213 - Kenjiro Shinozuka (JP) + Henri Magne (FR) - Paris Le Cap 1992 - water slide decals and assembly instructions - for Tamiya reference TAM24121 image

Shunko Models: Marking / livery 1/24 scale - Mitsubishi Pajero Sonauto RalliArt Team sponsored by Citizen #213 - Kenjiro Shinozuka + Henri Magne - Paris Le Cap 1992 - water slide decals and assembly instructions - for Tamiya reference TAM24121

Shunko Models Reference: SHK-D206

New limited-time re-edition of the decals of the Mitsubishi Pajero that with number #213 participated in the Paris - le Cap Rally in 1992. This decal sheet is designed to be used on the Tamiya 1/24 scale kit.
Click here for more details
Shunko Models: Marking / livery 1/24 scale - Nissan Skyline Nismo GT-R R33 Nismo Team sponsored by Pennzoil #23 - Masami Kageyama (JP) + Erik Comas (FR) - Japanese Grand Touring Car Championship (JGTC) 1998 - water slide decals, assembly instructions and painting instructions - for Tamiya references TAM24178 and TAM24184 image

Shunko Models: Marking / livery 1/24 scale - Nissan Skyline Nismo GT-R R33 Nismo Team sponsored by Pennzoil #23 - Masami Kageyama + Erik Comas - Japanese Grand Touring Car Championship (JGTC) 1998 - water slide decals, assembly instructions and painting instructions - for Tamiya references TAM24178 and TAM24184

Shunko Models Reference: SHK-D393

Limited time re-issue of the decal sheet that allows you to reproduce, using the Tamiya kit as a base, the livery of the Nissan Skyline Nismo GT-R R33 sponsored by Pennzoil. Unlike the original edition, Shunko Models has taken advantage of this re-edition to print the decal sheet in "hard-type decal" type.
Click here for more details
Number Five: Paint for airbrush - DS3 WRC White - 1 x 30ml - for Heller references 50757, 80757 and 80758 image

Number Five: Paint for airbrush - DS3 WRC White - 1 x 30ml - for Heller references 50757, 80757 and 80758

Number Five Reference: N5-C210

White paint formulated according to the Citron technical documentation for decorating the Citroen DS3 WRC Heller scale kit.
Click here for more details
Model Factory Hiro: Car scale model kit 1/43 scale - Williams Renault FW16 Williams Grand Prix Engineering Team sponsored by Rothmans #0, 2 - Damon Hill (GB), Ayrton Senna da Silva (BR) - Pacific Formula 1 Grand Prix 1994 - photo-etched parts, rubber parts, turned metal parts, water slide decals, white metal parts, assembly instructions and painting instructions image

Model Factory Hiro: Car scale model kit 1/43 scale - Williams Renault FW16 Williams Grand Prix Engineering Team sponsored by Rothmans #0, 2 - Damon Hill, Ayrton Senna da Silva - Pacific Formula 1 Grand Prix 1994 - photo-etched parts, rubber parts, turned metal parts, water slide decals, white metal parts, assembly instructions and painting instructions

Model Factory Hiro Reference: MFH-K620

Superb scale model kit from Model Factory Hiro in 1/43 scale of one of the most influential cars of the 90s, the Williams FW16. In the box you will find white metal parts, decals, tires stamped with the manufacturer's logos, turned metal parts, and a great instruction manual. This version is based on the low-speed specification used during the Pacific Grand Prix, where multi-plane front and rear wings were installed.
Click here for more details
Model Factory Hiro: Car scale model kit 1/43 scale - Williams Renault FW16 Williams Grand Prix Engineering Team sponsored by Rothmans #0, 2 - Damon Hill (GB), Ayrton Senna da Silva (BR) - San Marino Formula 1 Grand Prix 1994 - metal parts, photo-etched parts, rubber parts, turned metal parts, water slide decals, white metal parts and assembly instructions image

Model Factory Hiro: Car scale model kit 1/43 scale - Williams Renault FW16 Williams Grand Prix Engineering Team sponsored by Rothmans #0, 2 - Damon Hill, Ayrton Senna da Silva - San Marino Formula 1 Grand Prix 1994 - metal parts, photo-etched parts, rubber parts, turned metal parts, water slide decals, white metal parts and assembly instructions

Model Factory Hiro Reference: MFH-K536

Magnificent Model Factory Hiro 1/43 scale model kit of one of the most influential cars of the 90s, the Williams FW16. In the box you will find pieces of white metal, decals, tires stamped with manufacturer logos, metal turned parts, and a great assembly instructions manual. This version uses specifications for high-speed, low-downforce circuits, which is why the rear wing is specific and has only two planes.
Click here for more details
Model Factory Hiro: Car scale model kit 1/43 scale - Williams Renault FW16 Williams Grand Prix Engineering Team sponsored by Rothmans #0, 2 - Damon Hill (GB), Ayrton Senna da Silva (BR) - Brazilian Formula 1 Grand Prix 1994 - metal parts, photo-etched parts, rubber parts, turned metal parts, water slide decals, white metal parts and assembly instructions image

Model Factory Hiro: Car scale model kit 1/43 scale - Williams Renault FW16 Williams Grand Prix Engineering Team sponsored by Rothmans #0, 2 - Damon Hill, Ayrton Senna da Silva - Brazilian Formula 1 Grand Prix 1994 - metal parts, photo-etched parts, rubber parts, turned metal parts, water slide decals, white metal parts and assembly instructions

Model Factory Hiro Reference: MFH-K535

Magnificent Model Factory Hiro 1/43 scale model kit of one of the most influential cars of the 90s, the Williams FW16. In the box you will find pieces of white metal, decals, tires stamped with manufacturer logos, metal turned parts, and a great assembly instructions manual. This version, corresponding to the first event of the season held at the Interlagos circuit in Brazil, has different front and rear wings with three planes.
Click here for more details
Studio27: Marking / livery 1/12 scale - Suzuki RG400 Gamma late version sponsored by Walter Wolf - water slide decals and placement instructions - for Hasegawa references 21509, BK9 and HAS-21509 image

Studio27: Marking / livery 1/12 scale - Suzuki RG400 Gamma late version sponsored by Walter Wolf - water slide decals and placement instructions - for Hasegawa references 21509, BK9 and HAS-21509

Studio27 Reference: ST27-DC1234

Decal sheet to recreate a very special version of the Suzuki RG400, where the Walter Wolf logos become the protagonists on the fairing. This version was marketed in two finishes, black and glossy white. The decal is designed to be used over the references of the Hasegawa kit.
Click here for more details
Tabu Design: Marking / livery 1/24 scale - Porsche 934 RSR - water slide decals - for Tamiya references TAM24328 and TAM24334 image

Tabu Design: Marking / livery 1/24 scale - Porsche 934 RSR - water slide decals - for Tamiya references TAM24328 and TAM24334

Tabu Design Reference: TABU24088

If you have any of the 1/24 scale Porsche 934 RSR Tamiya kits in your closet, you will have noticed when comparing with the reference photos that some of the logos are not included on the original decal sheet. So to solve that small inconvenience, the complementary decal sheet with all those "lost logos" is again available.
Click here for more details
Number Five: Paint for airbrush - 1250 GS White - 1 x 30ml - for Meng Model references MT-005 and SPS-091 image

Number Five: Paint for airbrush - 1250 GS White - 1 x 30ml - for Meng Model references MT-005 and SPS-091

Number Five Reference: N5-C211

White color tone same as that BMW uses in its modern R 1250 GS Adventure. This color is the most suitable to use when painting the Meng Model kit.
Click here for more details
Tamiya: Car scale model kit 1/24 scale - Subaru Impreza WRC Subaru World Rally Team #5, 6 - Petter Solberg (NO) + Phil Mills (GB), Stéphane Sarrazin (FR) + Patrick Pivato (FR) - Monte Carlo Rally - Rallye Automobile de Monte-Carlo 2005 - paint masks, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Tamiya: Car scale model kit 1/24 scale - Subaru Impreza WRC Subaru World Rally Team #5, 6 - Petter Solberg + Phil Mills, Stphane Sarrazin + Patrick Pivato - Monte Carlo Rally - Rallye Automobile de Monte-Carlo 2005 - paint masks, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Tamiya Reference: TAM24281

A classic from the Tamiya catalogue, available again at SpotModel. The kit of the Subaru Impreza S10 WRC '04 reproduces the version used in the 2005 Monte Carlo, where the Subaru team decided (as would happen in the second event held in Sweden) to participate with the previous year's models, although with some small change like BBS rims with 4 anchor screws. A spectacular kit with many quality details for an almost perfect assembly even out of the box, such as its pre-painted wheels in the BBS gold color, the interiors of the front and rear lights as separate and chrome-plated pieces, or the lenses of the rear lights in translucent red plastic. Who can resist?
Click here for more details
Decalcas: Detail 1/24 scale - Emergency button - Type 4 - resin parts and water slide decals - 20 units image

Decalcas: Detail 1/24 scale - Emergency button - Type 4 - resin parts and water slide decals - 20 units

Decalcas Reference: DCL-PAR126

Emergency button in 1/24 scale, which reproduces those used in modern competition vehicles for the electrical cut-off and activation of the extinguishing system, so you can use them in your scale models. 20 3D printed push buttons are included, as well as a decal sheet with the electrical cut-off and extinction indicators. Each of the push buttons has a diameter of 1.3 mm, with a 0.75 mm stem.
Click here for more details
Italeri: Tractor head scale model kit 1/24 scale - Volvo FH Plat Dak Low roof - photo-etched parts, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Italeri: Tractor head scale model kit 1/24 scale - Volvo FH Plat Dak Low roof - photo-etched parts, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Italeri Reference: 3962

Italeri has almost completely renewed its Volvo FH reference, using new molds to reproduce the low-roof version. The cabin and interior are new and fully detailed, as are the engine and frame. The kit allows you to choose whether the driver's door or the front radiator grill are open or closed. In addition, it includes a photo-etched plate and a sheet with chrome stickers.
Click here for more details
Number Five: Paint for airbrush - Signal Brown RAL8002 - 1 x 30ml image

Number Five: Paint for airbrush - Signal Brown RAL8002 - 1 x 30ml

Number Five Reference: N5-X095

Signal Brown RAL8002 color tone formulated according to the RAL color chart.
Click here for more details
Number Five: Paint for airbrush - Copper Gold - 1 x 30ml image

Number Five: Paint for airbrush - Copper Gold - 1 x 30ml

Number Five Reference: N5-X096

Coppery gold tone, like the one present in many metal parts and special alloy finishes, ideal for increasing the chromatic variety when painting the mechanical parts of your models.
Click here for more details
Scale Production: Seat 1/24 scale - Bride Cuga - 3D printed parts - 2 units image

Scale Production: Seat 1/24 scale - Bride Cuga - 3D printed parts - 2 units

Scale Production Reference: SP24334

Set of two sports seats imitating the design of the Cuga model from the Japanese manufacturer Bride. Decals NOT included.
Click here for more details
Scale Production: Tyre set 1/24 scale - Yokohama Advan Neova 19/20 inches - rubber parts - 4 units image

Scale Production: Tyre set 1/24 scale - Yokohama Advan Neova 19/20 inches - rubber parts - 4 units

Scale Production Reference: SPR24030

Set of four tires imitating the design of the Yokohama Advan Neova. The dimensions of the tires are 26.5 mm outer diameter, 21.5 mm inner diameter, and a width of 12.5 mm.
Click here for more details
Scale Production: Tyre set 1/24 scale - Pirelli PZero Trofeo R 21 inches - rubber parts - 4 units image

Scale Production: Tyre set 1/24 scale - Pirelli PZero Trofeo R 21 inches - rubber parts - 4 units

Scale Production Reference: SPR24031

Set of four wide, low-profile tires imitating the design of the Pirelli PZero Trofeo R. The dimensions of the tires are 28.5 mm external diameter and 24.5 mm internal diameter, while for the width there are differences between the front tires, 12 mm, and the rear ones, 13.5 mm.
Click here for more details
Scale Production: Rims 1/24 scale - BBS Albert-Limmer 13 inches - 3D printed parts and turned metal parts - 4 units image

Scale Production: Rims 1/24 scale - BBS Albert-Limmer 13 inches - 3D printed parts and turned metal parts - 4 units

Scale Production Reference: SPRF24211

Set of 4 rims with the design of the BBS Albert-Limmer rims. The outer ring of the rim is made of turned aluminium, while the core of the rim is made using 3D printing. The diameter of the rims is approximately 15.5 mm. This reference DOES NOT include tires.
Click here for more details
Scale Production: Detail 1/24 scale - Subwoofer - 3D printed parts - 1 + 1 units image

Scale Production: Detail 1/24 scale - Subwoofer - 3D printed parts - 1 + 1 units

Scale Production Reference: SP24337-1

Who hasn't at some point wanted to have a good sound system in their car to enjoy music? Some go much further, installing gigantic subwoofers in their cars, turning them into real nightclubs. Do you have a project with similar characteristics in mind? Well, this reference from Scale Production, which includes two subwoofer models with their corresponding cores, is the ideal complement.
Click here for more details
Scale Production: Detail 1/24 scale - Speakers - 3D printed parts - 6 units image

Scale Production: Detail 1/24 scale - Speakers - 3D printed parts - 6 units

Scale Production Reference: SP24404-1

Do you have a project in mind where the sound equipment is partly the protagonist? Do you need speakers to place in the rear tray or on the door panels? Well then this set of six 3D printed speakers, which includes 3 different sizes of 7, 10 and 15 mm in diameter (2 of each), is just what you need.
Click here for more details
Scale Production: Rims 1/24 scale - PLS 13 inches - 3D printed parts and turned metal parts - 4 units image

Scale Production: Rims 1/24 scale - PLS 13 inches - 3D printed parts and turned metal parts - 4 units

Scale Production Reference: SPRF24053

Set of 4 rims with the design of the 13-inch PLS rims. The outer ring of the rim is made of turned aluminium, while the core of the rim is made using 3D printing. The diameter of the rims is approximately 15.5 mm. This reference DOES NOT include tires.
Click here for more details
USCP: Tyre set 1/24 scale - Falken 10 inch - 3D printed parts - for USCP references 24P183 and 24P184 - 4 units image

USCP: Tyre set 1/24 scale - Falken 10 inch - 3D printed parts - for USCP references 24P183 and 24P184 - 4 units

USCP Reference: USCP-10-1

Set of tires printed in resin using 3D technology for 10-inch rims. Ideal to be used together with the USCP 10-inch rims designed for the different Hasegawa Mini Cooper references at 1/24 scale.
Click here for more details
USCP: Rims 1/24 scale - Rostyle steel 10 inches - 3D printed parts - for Hasegawa references 20694, 21154, HC54, HC-54, 21157 and HC57 - 4 units image

USCP: Rims 1/24 scale - Rostyle steel 10 inches - 3D printed parts - for Hasegawa references 20694, 21154, HC54, HC-54, 21157 and HC57 - 4 units

USCP Reference: 24P183

Set of 3D printed resin rims at a 1/24 scale designed to perfectly adapt to the different references of the Hasegawa Mini Cooper kit. The design is similar to that of the 10-inch Rostyle steel wheels. Adapters are also included to use this set of rims on any Aoshima, Fujimi, Hasegawa or Tamiya kits. Be careful, tires not included! The images with the tires are for example only. The 10-inch tires, with reference USCP-10-1, can be purchased separately.
Click here for more details
USCP: Rims 1/24 scale - JBW D1 10 inches - 3D printed parts - for Hasegawa references 20694, 21154, HC54, HC-54, 21157 and HC57 - 4 units image

USCP: Rims 1/24 scale - JBW D1 10 inches - 3D printed parts - for Hasegawa references 20694, 21154, HC54, HC-54, 21157 and HC57 - 4 units

USCP Reference: 24P184

Set of 3D printed resin rims at a 1/24 scale designed to perfectly adapt to the different references of the Hasegawa Mini Cooper kit. The design is similar to that of the 10-inch JBW D1 wheels. Adapters are also included to use this set of rims on any Aoshima, Fujimi, Hasegawa or Tamiya kits. Be careful, tires not included! The images with the tires are for example only. The 10-inch tires, with reference USCP-10-1, can be purchased separately.
Click here for more details
USCP: Rims 1/24 scale - JBW Superlight 2 13 inches - 3D printed parts - for Hasegawa references 20694, 21154, HC54, HC-54, 21157 and HC57 - 4 units image

USCP: Rims 1/24 scale - JBW Superlight 2 13 inches - 3D printed parts - for Hasegawa references 20694, 21154, HC54, HC-54, 21157 and HC57 - 4 units

USCP Reference: 24P181

1/24 scale 3D printed resin rims set designed to perfectly fit any Aoshima, Fujimi, Tamiya or Hasegawa kits thanks to the included adapter set. The design of the rims is similar to that used on the JBW Superlight mounted, for example, on some Mini Coopers, which makes them ideal to combine with the Hasegawa kit. Be careful, tires not included! The images with the tires are for example only. The 13-inch tires, with reference USCP-13-1, can be purchased separately.
Click here for more details
USCP: Rims and tyres set 1/24 scale - Revolution 4 spokes 13 inches - 3D printed parts and rubber parts - for Hasegawa references 20694, 21154, HC54, HC-54, 21157 and HC57 - 4 units image

USCP: Rims and tyres set 1/24 scale - Revolution 4 spokes 13 inches - 3D printed parts and rubber parts - for Hasegawa references 20694, 21154, HC54, HC-54, 21157 and HC57 - 4 units

USCP Reference: 24P182

1/24 scale 3D printed resin rims set designed to perfectly fit any Aoshima, Fujimi, Tamiya or Hasegawa kits thanks to the included adapter set. The design of the rims is similar to that used on the Revolution mounted, for example, on some Mini Coopers, which makes them ideal to combine with the Hasegawa kit. This reference includes 13-inch tires.
Click here for more details
Scale Production: Rims 1/24 scale - Kronprinz for Porsche 15 inches - 3D printed parts and turned metal parts - 4 units image

Scale Production: Rims 1/24 scale - Kronprinz for Porsche 15 inches - 3D printed parts and turned metal parts - 4 units

Scale Production Reference: SPRF24213

Set of 4 rims with the design of the Kronprinz wheels mounted on the first versions of the Porsche 911 and 356. The outer ring of the rims is made of turned aluminium, while the core of the rim is made using 3D printing. The diameter of the rims is approximately 17 mm. This reference DOES NOT include tires.
Click here for more details