Newsletter 615: ShizuokaMay 8^th, 2024

1/20 scale kit of the March Ford 761 as it participated in the 1976 USA West Formula 1 Grand Prix held at the Long Beach circuit. With the usual quality of Studio 27 references, it has a clearly molded and bubble-free resin body, rubber tires, turned aluminium rims, suspension and other mechanical parts in white metal, a complete plate of photo-etched parts to increase the detail and a high quality decal sheet. This kit allows you to completely reproduce its 3-liter Ford Cosworth DFV V8 engine, as well as the monocoque chassis.

New reedition of the veteran Protar kit. Inside the box you will find a very interesting parts list. For instance, the chain is broken down link by link. The rims are dissected in two parts, which will allow you, if you want to make your life a bit more complicated, to replace the spokes with others made of metal. Even THE huge piston comes fully detailed !!

The type of fog light that we were missing for many of our models, the rectangular ones, finally available in various scales. Each of the headlights is made up of four pieces; casing, support, glass and hard cover, so you can choose to mount it leaving the glass visible or protected with the cover, where you can choose between three possible manufacturers (Cibie, Hella or Sev Marchal) thanks to the decals sheet (not pre-cut) included. The headlights at 1/12 scale have a size of 13,2 x 7,8 mm.

The type of fog light that we were missing for many of our models, the rectangular ones, finally available in various scales. Each of the headlights is made up of four pieces; casing, support, glass and hard cover, so you can choose to mount it leaving the glass visible or protected with the cover, where you can choose between three possible manufacturers (Cibie, Hella or Sev Marchal) thanks to the decals sheet (not pre-cut) included. The headlights at 1/18 scale have a size of 8,8 x 5,2 mm.

The type of fog light that we were missing for many of our models, the rectangular ones, finally available in various scales. Each of the headlights is made up of four pieces; casing, support, glass and hard cover, so you can choose to mount it leaving the glass visible or protected with the cover, where you can choose between three possible manufacturers (Cibie, Hella or Sev Marchal) thanks to the decals sheet (not pre-cut) included. The headlights at 1/24 scale have a size of 6,6 x 3,9 mm.

The type of fog light that we were missing for many of our models, the rectangular ones, finally available in various scales. Each of the headlights is made up of four pieces; casing, support, glass and hard cover, so you can choose to mount it leaving the glass visible or protected with the cover, where you can choose between three possible manufacturers (Cibie, Hella or Sev Marchal) thanks to the decals sheet (not pre-cut) included. The headlights at 1/32 scale have a size of 5 x 2,9 mm.

The type of fog light that we were missing for many of our models, the rectangular ones, finally available in various scales. Each of the headlights is made up of four pieces; casing, support, glass and hard cover, so you can choose to mount it leaving the glass visible or protected with the cover, where you can choose between three possible manufacturers (Cibie, Hella or Sev Marchal) thanks to the decals sheet (not pre-cut) included. The headlights at 1/43 scale have a size of 3,7 x 2,2 mm.

Bag with 30 black steel micro cross-head screws with a round head, metric M1.4 and 3 mm in length.

Bag with 30 flat black steel micro cross-head screws, metric M1.4 and 3 mm in length.

The Mazda RX-7 Veilside version became famous for its appearance in the Fast & Furious Saga film "Tokyo Drift", where it is driven by one of the protagonists, Han Lue, played by actor Sung Kang. This complete transkit allows you, starting from the base of the Tamiya Mazda RX-7, to build a precise replica of this legendary vehicle. The transkit contains a complete resin body , interior parts, the rear exhaust silencer and a set of wheels.

The fourth Legrand reference in 1/8 scale may seem like a re-edition, but it is not... and the two units that were produced of the Mercedes-Benz 300 SLR Uhlenhaut Coupé present some important differences between themselves, both in the interior, completely in red instead of the blue of the previous version, as on the outside, with a striking and enormous Eberspächer exhaust silencer located directly on the right side of the body, the round exterior mirror, or one that does not have a fuel filler through the rear window. The weight of the finished model is approximately 7 kg, it is made of die-cast metal and is already painted. It includes more than 900 pieces made of different materials such as metal, rubber, textiles and high-quality plastic, and is easily assembled, since many of its pieces are screwed together. The steering and suspension are functional, as are the doors and hoods. The measurements once assembled are: 550 x 210 x 160 cm.

Complete set of parts to improve and detail the powerful Honda RA168E 1.5 V6 turbo engine of the 1/20 scale Tamiya McLaren MP4/4 kit.

A perfect product for repairing small scratches, scuffs, holes, small gaps between pieces... It can be easily applied with a brush, or even dissolved (using Tamiya Lacquer Thinner LP-10) to be applied with an airbrush, becoming a very versatile tool for craft and hobby use. Its light gray color is perfect for detecting irregularities in the pieces. It can also be used on metal and wooden models. Each bottle includes 40ml of product.

Meng Model continues to delight us with models from the BMW range, now it is the turn of one of its latest Enduro creations. The first designs are spectacular, although finally the kit does not include the set of suitcases that BMW offers for this model, which can be purchased separately as an extra.

Scale model kit of the Ferrari 512M belonging to the Montegrosso range by Tameo, with the removable rear hood to expose the engine and all the mechanical components that surround it. It includes an extensive exploded view of metal parts, photo-etched, vacuum-formed and turned metal parts, such as the intake trumpets. A delicacy that you cannot miss!

This resin kit allows you to choose between two versions of the Group 4 Porsche 911SC. Both were prepared by the Almeras brothers, they were driven by the pair formed by Jean-Luc Thérier and Michel Vial in the Rally of Portugal and in both cases they had to abandon. What is the difference then? The version with the number #5 is the one used in the 1981 edition and in 1982 it was the number #4 that was worn on the car. A very complete kit, which includes the option of mounting the engine, which is accessible once the model is assembled.

This resin kit allows you to make the Group 4 Porsche 911SC with which Jacques Alméras, co-driven by "Tilber", finished in twelfth position in the 1980 Monte Carlo Rally, with a car prepared in his own workshop. A very complete model, which includes the option of mounting the engine, which is accessible once the model is assembled.

Set of decals ideal to replace the decals of the classic Tamiya kit of the Honda Accord that raced in the Japanese Touring Car Championship (JTCC) in the mid-90s.

This decal sheet allows you to choose between two options to reproduce the Castrol-sponsored version of the Hasemi Motorsport team's Nissan Primera. The first of them with the number #3 is the one used during the 1994 season in the Japanese Touring Car Championship (JTCC), while with the number #7 the unit that participated in the Macau Guia Race also in 1994 is reproduced, where the spare parts manufacturer Unisia Jecs also joined as a sponsor.

You could say that they don't really need it, but it is common to find Liberty Walk models personalized even more with spectacular decorations. In this case, the LB Nissan R35 GT-R Type 2 is dressed in the same colours as the long-range fighter used by the Imperial Japanese Navy Air Service in World War II, with its characteristic matte dark green color, while which does not lack the red circle of the Japanese flag.

Decal set to make the version with which the Japanese driver Naoki Hattori participated in the eighth and final round of the 1997 Japanese Touring Car Championship (JTCC), held at the Fuji Speedway circuit, achieving first position on the grid for both races.

Set of decals ideal to replace the decals of the classic Tamiya kit of the Honda Accord that raced in the Japanese Touring Car Championship (JTCC) in the mid-90s.

Orange color tone formulated according to the technical documentation of Bruce McLaren Motor Racing to decorate the classic competition vehicles of this legendary team.

Redesigned and revised decals, ideal to replace those of the original Tamiya kit. The decal sheet also includes the logos and sponsorship for the helmet and overalls of its rider, the great Kenny Roberts.

This reissue of the kit has been revised by Italeri, with new parts. Among the changes made, the steering system has been updated and the design of the door hinges has been improved, which can be opened as well as the front and rear hoods. A great kit that will allow you to reproduce this authentic icon on four wheels and one of the symbols of "made in Italy".

Trail motorcycles are designed to cover many kilometres comfortably regardless of the road conditions, and that is why they are ideal motorcycles for travelling, but where to put the luggage? That is why manufacturers offer accessories that increase the cargo space of their motorcycles, and like them, Meng Model has prepared a set of luggage cases to complete your kit of the BMW R1250 GS, including the bases and supports that adapt perfectly to the chassis of the kit. Where do you want to go?

What better way to discover the legendary Alpine A110 1600S than a 1/8 scale kit with more than 615 pre-painted parts, 113 of which are metal? What if it is also the winning unit of the 1971 Monte Carlo Rally with the brilliant Ove Andersson at the wheel accompanied on his right by David Stone? This impressive kit allows you to build a faithful replica of this iconic French model from the 1960s and 1970s, which dominated the roads and circuits for almost two decades, culminating in the Manufacturers' title in the 1971 World Rally Championship. All doors and hoods open to reveal a meticulously reproduced interior and mechanics. The model is completed with the addition of lights and sound effects. The passion and heritage of the Alpine A110 1600 S come to life before your eyes with this premium reproduction, which once assembled weighs approximately 6 kilos. Please note! The model is delivered in a completely white box, with the parts distributed in plastic bags.

This set of carbon fibre patterns for the Tamiya kit of the Honda NSR 500 is composed of two decal sheets. Each of the decal sheets has the template with the patterns printed on its back, which must be cut out, and which correspond perfectly with the corresponding pieces of the kit. Each of the carbon fibre patterns is identified with the number of the part of the kit on which it has to be placed. The carbon weave of the set corresponds to the reference SM1020 with a silver gray and black diagonal weave, and there are a total of 21 carbon templates.

This set of carbon fibre patterns for the Tamiya kit of the Suzuki RGV-Gamma XR-89 is composed of two decal sheets. Each of the decal sheets has a template printed on the back with the patterns, which must be cut out, and which correspond perfectly with the corresponding pieces of the kit. Each of the carbon fibre patterns is identified with the number of the part of the kit on which it has to be placed. The set has a total of 28 carbon templates.

This set of carbon fibre patterns for the Tamiya model of the Kawasaki ZZR 1400 is composed of two decal sheets . Each of the decal sheets has a template printed on the back with the patterns, which must be cut out, and which correspond perfectly with the corresponding pieces of the model. Each of the carbon fibre patterns is identified with the number of the part of the model on which it has to be placed. This set of decals will allow you to "dress" the complete motorcycle in carbon fibre .

This set of carbon fibre patterns for the Tamiya kit of the Gordon Murray GMA Type 50 is composed of two decal sheets, allowing you to completely "dress" the body of the GMA T.50 in pewter metallic twill weave carbon fibre. Each of the decal sheets has a template printed on the back with the patterns, which must be cut out, and which correspond perfectly with the pieces of the kit. The set includes a total of 14 carbon templates.

This set of carbon fibre patterns for the Tamiya kit of the Gordon Murray GMA Type 50 is composed of two decal sheets, allowing you to completely "dress" the body of the GMA T.50 in silver twill weave carbon fibre and transparent, so that the color of the bodywork shines through the decal. Each of the decal sheets has a template printed on the back with the patterns, which must be cut out, and which correspond perfectly with the pieces of the kit. The set includes a total of 14 carbon templates.

This set of carbon fibre patterns for the Tamiya kit of the Porsche Carrera GT is made up of no less than four sheets of decals, allowing you to completely "dress" the body of the Carrera GT in carbon fibre. Each of the decal sheets has a template printed on the back with the patterns, which must be cut out, and which correspond perfectly with the pieces of the kit.

1/20 scale kit of the Williams Renault FW12C used by the Williams team during the 1989 season. With the usual quality of Studio 27 references, it has a clearly moulded resin body without bubbles, rubber tires, rims in turned aluminium, suspension and other mechanical parts in white metal, a complete plate of photo-etched parts to increase detail and a sheet of high-quality decals. This kit is curbside type, and does not include engine details.

1/20 scale kit of the McLaren Ford MP4/1, used during the 1981 season. With the usual quality of Studio27 products, it has a clearly moulded resin body without bubbles, rubber tires, turned aluminium rims, suspension and other mechanical parts in white metal, a complete plate of photo-etched parts to increase detail and a sheet of high-quality decals. This kit is curbside type, and does not include engine details.

Complete transkit to convert the Hasegawa Mini Cooper kit into the Clubman 1275 GT version. The transkit includes the necessary parts to replace the entire front part of the car, as well as the dashboard, available for both left- and right-hand drive. It also has two steering wheel and front grille options. Which one do you prefer?

3D printed resin wheels in 1/24 scale. The set includes 4 Dunlop Racing rubber tires . The rims can be adapted to any Aoshima, Fujimi or Tamiya model thanks to the different adaptors included. These wheels have a design similar to that used in many classic models from the 50s and 60s in their participation in competition, replacing wired wheels in search of greater reliability and lightness, since contrary to what their appearance may seem, they were light alloy aluminium rims.

3D printed resin wheels in 1/24 scale. The set includes 4 Dunlop Racing rubber tires, and is designed to fit the Revell Mercedes 300 SLR kit. The center wheel nuts have been redesigned to closely reflect the design used on the 300 SLR, with the star perfectly visible in its center. Also included are the air valves and two sets of adapters to be able to mount the tires on kits from other manufacturers. The diameter of the wheels with the tires mounted is approximately 27.3 mm, with a width of approximately 8.3 mm.

Set of 4 1/24 scale 3D printed resin rims designed to be mounted on the Tamiya references of the Mercedes 300 SL "gullwing". The design of the rims imitates that of the center-nut Rudge wheels fitted as standard on the Mercedes 300 SL. The rims are prepared to be used together with the tires of the Tamiya kit.