Newsletter 609: RefuelingMarch 29^th, 2024

In the 60s, in the automobile world, design prevailed over other features, and that trend also reached gas stations, where the pumps of each of the brands became a symbol of differentiation. If you are a lover of the 60s, don't miss the opportunity to accompany any of your models with one of the pumps that the Shell oil company had in its service stations. Reproduced in great detail by DAB Models, they include the decals with the logos and the counter clock for litres of fuel refuelled and a practical pre-cut acetate to simulate glass. Precious!

In the 60s, in the automobile world, design prevailed over other features, and that trend also reached gas stations, where the pumps of each of the brands became a symbol of differentiation. If you are a lover of the 60s, don't miss the opportunity to accompany any of your models with one of the pumps that the Mobilgas oil company had in its service stations. Reproduced in great detail by DAB Models, they include the decals with the logos and the counter clock for litres of fuel refuelled and a practical pre-cut acetate to simulate glass. You dare?

In the 60s, in the automobile world, design prevailed over other features, and that trend also reached gas stations, where the pumps of each of the brands became a symbol of differentiation. If you are a lover of the 60s, don't miss the opportunity to accompany any of your models with one of the pumps that the Firebird oil company had in its service stations. Reproduced in great detail by DAB Models, they include the decals with the logos and the counter clock for litres of fuel refuelled and a practical pre-cut acetate to simulate glass. Do not miss yours!

Racing version of the mythical Shelby Cobra 427 S / C, with the decoration that was used in Laguna Seca in 1965 with the number 91. Inside the box you will find a beautiful kit with the whole engine broken down. Magnificent!!

Assembled collector's model that reproduces the version of the Fiat 131 Abarth Group 4 with which Walter Röhrl obtained victory in the 1982 Hunsrück Rally, with an incredible lead of more than ten minutes over the second place finisher.

Pearlescent purple tone similar to that used by the Keating Motorsport team on the Wynn's sponsored Ford GT at the 2019 24 Hours of Le Mans. Valid on other Wynn's sponsored vehicles.

ScaleLab 24 has prepared a complete detailing set for the 1/20 scale Tamiya kit of the Porsche 935 Turbo, recently re-released. Included in the set you will find 3 photo-etched plates, the central wheel nuts in metal, the toggle switches, the fabric to simulate the driver's harnesses and even a new tank made of resin. What are you waiting for to get yours?

ScaleLab 24 has prepared a complete detailing set for the 1/20 scale Tamiya kit of Vaillant Porsche 935 K2, recently re-edited. Included in the set you will find 3 photo-etched plates, the central wheel nuts in metal, the toggle switches, the fabric to simulate the driver's harnesses and even a new tank made of resin. The perfect complement!

This reissue of the kit has been revised by Italeri, with new parts. Among the changes made, the steering system has been updated and the design of the door hinges has been improved, which can be opened as well as the front and rear hoods. A great kit that will allow you to reproduce this authentic icon on four wheels and one of the symbols of "made in Italy".

Re-edition of this Italeri kit of one of the most successful trucks from the manufacturer DAF. As is usual at Italeri, the part list of the kit is very extensive, allowing any area of the truck to be detailed, from the chassis and its mechanical components, as well as the engine and cabin.

These door handles designed by UCSP are not only interesting for including two complete sets, but they also allow a perfect painting of the handle itself and the lock cylinder as they are separately printed pieces You can use this reference in almost any 1/24 scale kit of the Porsche 911, such as those from Tamiya, Fujimi, Revell, NuNu...

Complete set of parts to detail the interior of the Nissan Silvia S14/240SX Fujimi kits. The complete dashboard, door panels and central tunnel are included in resin, while smaller detail parts, such as the steering wheel, pedals and handbrake lever, are directly 3D printed.

Great resin reproduction of the Cosworth YB engine with gearbox for rear-wheel drive models, such as the Ford Sierra Cosworth RS500. It includes a photo-etched plate with elements as curious as the head gasket, giving rise to the option of creating scenarios where the engine is being repaired.

Complete the engine compartment of your Hasegawa BMW 2002 kit with this complete sheet of decals with all the labels and plates that you can find when lifting the hood.

The same decal sheet that USCP includes in its transkit of the famous Ford Shelby Mustang GT500 Eleanor, now available separately as a spare part or so you can customize any other Ford Mustang... or whatever comes to mind.

The same decal sheet that USCP includes in its Volkswagen Transporter T1 Renntransporter Long transkit, now available separately as a spare part or so you can customize any other transport van.

The Porsche 911 was a regular in rallies for several decades, and over time several evolutions could be seen, where such recognizable elements of the 911 as its rear spoiler underwent numerous changes. They are not all the same! That is why KMP has designed the different spoilers used by the Porsche 911 SC RS. This reference reproduces the one used in most versions sponsored by Bastos and during the 1984 season. The piece is totally different from the one included in the kit, and will help you give your model that extra touch of precision that it deserves. No major modifications to the kit are necessary for assembly.

Set of 4 rims with tires designed for use with the Beemax BMW M3 E30 group A rally kits. The dimensions of both the tire and the rim have been slightly adjusted to "fit" with the dimensions of the kit, and achieve a more realistic appearance of the whole.

Set of 4 Speedline 5-spoke wheels with tires designed for use with the Beemax BMW M3 E30 group A rally kits. The dimensions of both the tires and the rims have been slightly adjusted so that they "fit" with the dimensions of the kit, and achieve a more realistic appearance of the whole. In addition, the different design and dimensions of the front wheels and tires have been taken into account, smaller than those used on the rear axle.

The Porsche 911 was a regular in rallies for several decades, and over time several evolutions could be seen, where such recognizable elements of the 911 as its rear spoiler underwent numerous changes. They are not all the same! That is why KMP has designed the different spoilers used by the Porsche 911 SC RS. This reference reproduces the one used in most versions sponsored by Rothmans and after 1985. The piece is totally different from the one included in the kit, and will help you give your model that extra touch of precision that it deserves. No major modifications to the kit are necessary for assembly.

The Porsche 911 was a regular in rallies for several decades, and over time several evolutions could be seen, where such recognizable elements of the 911 as its rear spoiler underwent numerous changes. They are not all the same! That is why KMP has designed the different spoilers used by the Porsche 911 SC RS. This reference reproduces the one used in most versions sponsored by Belga during the 1985 season. The piece is totally different from the one included in the kit, and will help you give your model that extra touch of precision that it deserves. No major modifications to the kit are necessary for assembly.

Set of two sports seats imitating the design of the GT3 model of the Recaro brand, offered as an option for the Porsche 996 GT3 in the European market, where the rear shell was made of fiberglass.

30ml volume paint jar prepared for use with an airbrush. The shade has been formulated to replicate the textured metal look of mechanical parts, such as the Hewland gearbox housings associated with Cosworth DFV engines.

Complete transkit to make, based on the Porsche 934 Tamiya kit, the impressive Porsche 935 winner of the Zolder race belonging to the 1977 German DRM Championship. The transkit includes several resin parts, among which is the complete body, with its corresponding rear wing and front spoiler separately, 3 photo-etched plates, one of them for the precious honeycomb cores for the BBS rims, a high-quality decal sheet and different white metal parts, among which there are 4 wheel rims and two 5-spoke rear wheels, with their corresponding rubber tires. It cannot be missing in your showcase!

30ml volume paint jar prepared for use with an airbrush. The shade has been formulated to replicate the black textured look of mechanical parts, such as the rocker covers on Cosworth DFV engines.

Complete decal sheet designed for Heller's model of the Citroën DS3 WRC, reproducing the iconic livery that won the 2012 Monte Carlo Rally.

Complementary decal sheet with the additional logos of Castrol, Shell or Dunlop missing from the original decal sheet for the Tamiya reissue of the Toyota Celica LB Turbo Gr.5 at 1/20 scale.

Decal sheet to reproduce the version of the car that won the 2022 Spa 24 Hours. For correct reproduction, the Tamiya kit of the AMG GT3 needs to be modified in the Evo version.

Decal sheet to reproduce the version of the Audi R8 LMS GT3 Evo 2 with the number #24 that participated in the 2022 Nürburgring 24 Hours, achieving sixth final position.

Decals newly designed, revised and printed in Japan so you can replace the old decals on your Tamiya kit of the Nissan Primera.

In the 1995 edition of the 24 Hours of Le Mans the Nismo team fielded two units of the Nissan Skyline GT-R LM. This decal sheet allows you to reproduce the unit with number #22, which managed to finish the race in tenth position.

This decal sheet is designed to replace those of the Lotus 97T Fujimi kit in any of its versions, and allows you to choose between the decoration used in the Portuguese GP or the Belgian GP. The color chosen for the logos is the same dark beige as the real car. Being designed from scratch, this decal sheet includes some logos not included in the original kit decals. Since the original Fujimi kit has a slightly incorrect shape at the rear end of the hood, the decal instructions include how to modify it, and decals for that area whether you carry out the modification or not and decide to leave the hood as it comes with the kit.

Hexagon central nuts and axles for single-nut BBS type rims, made in 1:24 scale and manufactured by 3D printing. Give your model an extra dose of realism with these nuts and axles that take every detail to the extreme, allowing the possibility of adapting them to your design by presenting the axle and the nut nut separately. In addition, since the shaft is hollow, you can make the necessary modifications to the shaft, easily adjusting the length of the shaft that protrudes from the nut. With the usual quality of Decalcas products, and the convenience of not needing the use of primer, avoiding the loss of detail of the pieces, you will only have to paint and assemble the pieces on your scale model. A total of 12 nut-axle sets are included.

Re-edition of the already well-known Heller kit, but without including decoration. The rest of the parts remain unchanged, with the suspensions and wheel set corresponding to the tarmac version, despite the fact that the photo on the box shows a gravel version. What are you waiting for to get yours?

The kit has new parts to assemble the front and rear fenders and headlights to recreate the roadster version.