Newsletter 608: The great GandiniMarch 21, 2024

The great Gandini

The great Gandini
The Lamborghini Countach, icon of an entire era; the Lancia Stratos HF, a legend in the Rally world, especially on the most demanding stages; the Alfa Romeo Montreal, truly elegant and timeless; the Lamborghini Miura, the culmination of the supercars of the 60s; the Bugatti EB 110, with its groundbreaking design; the De Tomaso Pantera, with its V8 heart and its purebread racecar lines... All of them are true works of art in the automobile history, great glory-winning machines, recognizable from hundreds of meters away and full of personality.

And all of them were born from the hand of the magnificent Italian designer Marcello Gandini, one of the great car designers of all time, creator of many of the cars and supercars that are design references nowadays, who recently died at the age of 85 years. An applause for the maestro, wherever he is!!!

Not all of his works are available in scale but, as a tribute to this great figure of automotive design, we offer you at SpotModel some of them at a fantastic price... this week only!!

Aoshima: Car scale model kit 1/24 scale - Lamborghini Countach LP400 - paint masks, plastic parts, rubber parts, water slide decals and assembly instructions

Aoshima Reference: AOSH-058046

Few cars are as spectacular as the Countach, and if Aoshima allows us to do it with the doors open, and exposing the upper part of the impressive V12 engine, it becomes a delight. A model with many other details to discover, such as the rear lights in translucent red plastic that saves us part of the painting, and that gives them a practically real appearance.
Click here for more details

Hasegawa: Car scale model kit 1/24 scale - Lancia Stratos HF Group IV Lancia Great Britain Team sponsored by Nashua #2 - Markku Alén + Ilkka Kivimäki - Lombard RAC Rally 1979 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Hasegawa Reference: 20598

New version of a Hasegawa classic, such as his kit of the Lancia Stratos, recreating on this occasion the unit with which Marku Alen achieved fifth place in the 1979 Lombard RAC Rally. Regarding other references of the same model and manufacturer, the model differs only in the decal sheet.
Click here for more details

Tamiya: Car scale model kit 1/24 scale - Lancia Stratos Turbo sponsored by Alitalia #539 - Sandro Munari + Piero Sodano - Giro d'Italia Automobilistico 1977 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Tamiya Reference: TAM25210

Improved reissue of the veteran Tamiya reference 24003, originally launched in 1977. This new edition includes the figure of the driver, and unlike the original, it is not motorized. The decal sheet, wheels and instruction manual have been updated.
Click here for more details
Hasegawa: Car scale model kit 1/24 scale - Lancia Stratos HF sponsored by Rothmans #6 - Jorge de Bagration (ES) + Víctor Sabater (ES) - Sol-Race Rally 1981 - plastic parts, rubber parts, water slide decals, other materials, assembly instructions, painting instructions and does NOT include tobacco sponsor decals image

Hasegawa: Car scale model kit 1/24 scale - Lancia Stratos HF sponsored by Rothmans #6 - Jorge de Bagration + Víctor Sabater - Sol-Race Rally 1981 - plastic parts, rubber parts, water slide decals, other materials, assembly instructions, painting instructions and does NOT include tobacco sponsor decals

Hasegawa Reference: 20561

New reference of the classic Hasegawa kit of the Lancia Stratos HF that participated in numerous rallies throughout the world. In this case, the decoration chosen is that of the Spanish driver Jorge de Bagration sponsored by Rothmans, with which he finished second in the Rally Sol-Race in 1981, achieving his second title of Spanish Rally Champion that same year. ¡Look out!, the decals with the tobacco logos are not included in the model.
Click here for more details
Italeri: Car scale model kit 1/24 scale - Lancia Stratos HF sponsored by Alitalia #1 - Sandro Munari (IT) + Silvio Maiga (IT) - Monte Carlo Rally - Rallye Automobile de Monte-Carlo 1977 - plastic parts, rubber parts, water slide decals and assembly instructions image

Italeri: Car scale model kit 1/24 scale - Lancia Stratos HF sponsored by Alitalia #1 - Sandro Munari + Silvio Maiga - Monte Carlo Rally - Rallye Automobile de Monte-Carlo 1977 - plastic parts, rubber parts, water slide decals and assembly instructions

Italeri Reference: 3654

New re-edition of the classic Lancia Stratos HF scale model kit. Italeri offers us two options, the first one being the street car, and the second one being the car sponsored by Alitalia that tooke part at the Montecarlo Rally in 1977.
Click here for more details

Hasegawa: Car scale model kit 1/24 scale - Lamborghini Miura P400 SV - plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Hasegawa Reference: 21213

New re-edition of this beautiful kit of the even more beautiful Lamborghini Miura P400 SV. The manufacturer offers us nothing less than 116 parts, some of them chrome, in addition to rubber tires, decals, and metal adhesive pieces. A classic kit of a classic car that can not miss in your stash.
Click here for more details
Italeri: Car scale model kit 1/24 scale - Lamborghini Miura Jota SVJ 1970 and 1980 - plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions image

Italeri: Car scale model kit 1/24 scale - Lamborghini Miura Jota SVJ 1970 and 1980 - plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Italeri Reference: 3649

Time-limited re-edition of the Lamborghini Miura Jota SVJ kit by Italeri. Catalogued as skill level 2, measuring 18.3cm long once built.
Click here for more details
Heller: Car scale model kit 1/24 scale - Bugatti EB110 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Heller: Car scale model kit 1/24 scale - Bugatti EB110 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Heller Reference: 80738

New reedition of this beautiful Heller kit that was already released in 1992, including a total of 84 parts.
Click here for more details
Fujimi: Car scale model kit 1/24 scale - De Tomaso Pantera GTS - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Fujimi: Car scale model kit 1/24 scale - De Tomaso Pantera GTS - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Fujimi Reference: FJ125534

What suggestive designs have the Italian supercars of the 80s! Lamborghini, Maserati, Ferrari... and de Tomaso, with its aggressive and unmistakable Pantera. Fujimi brings us a model without too many complications, focusing on the body and the interior, to complete the GTS version of this legendary model. The body measures 175mm long, 75mm wide, and 103mm wheelbase (distance between axles).
Click here for more details
Fujimi: Car scale model kit 1/24 scale - De Tomaso Pantera - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Fujimi: Car scale model kit 1/24 scale - De Tomaso Pantera - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Fujimi Reference: FJ125572

The first versions of Italian supercars have a special charm. Yes, it is true, later versions with spoilers, stickers and other aerodynamic accessories can be spectacular, but sometimes the beauty and purity of lines of the original design is lost. For lovers of that essence, Fujimi brings us the initial version of the De Tomaso Pantera, with a simple model without mechanical parts to assemble, but with a detailed interior. Quite a beauty.
Click here for more details
Studio27: Carbon fibre pattern decal set 1/20 scale - Jordan Ford J191 - FIA Formula 1 World Championship 1991 - water slide decals and assembly instructions - for Tamiya reference TAM20032 image

Studio27: Carbon fibre pattern decal set 1/20 scale - Jordan Ford J191 - FIA Formula 1 World Championship 1991 - water slide decals and assembly instructions - for Tamiya reference TAM20032

Studio27 Reference: ST27-CARBOND20020

Two complete decals sheets with carbon fiber patterns for the cockpit, engine areas, monocoque, spoilers, and many many more. Stop trimming carbon fiber decals by hand and indulge yourself using these perfectly fitting ones from Studio27.
Click here for more details
Studio27: Carbon fibre pattern decal set 1/20 scale - Williams Renault FW13B - water slide decals and assembly instructions - for Tamiya reference TAM20025 image

Studio27: Carbon fibre pattern decal set 1/20 scale - Williams Renault FW13B - water slide decals and assembly instructions - for Tamiya reference TAM20025

Studio27 Reference: ST27-CARBOND20035

Complete set of decals, composed of three different sheets, with carbon fibre and Kevlar patterns to be used on the veteran Tamiya Williams Renault FW13B kit.
Click here for more details
Studio27: Transkit 1/20 scale - Ferrari 126C2 Late Type Scuderia Ferrari SPA Team #27, 28 - Patrick Tambay (FR), Didier Pironi (FR), Mario Andretti (US) - German Formula 1 Grand Prix, Dutch Formula 1 Grand Prix, Italian Formula 1 Grand Prix 1982 - photo-etched parts, resin parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts and assembly instructions - for Fujimi references FJ090320, 09032, GP-1, FJ960098, FJ09033, FJ090337, FJ09039, FJ09085, FJ09163, GPSP-31, FJ091945, FJ960098, GP-1 and FJ96009 image

Studio27: Transkit 1/20 scale - Ferrari 126C2 Late Type Scuderia Ferrari SPA Team #27, 28 - Patrick Tambay, Didier Pironi, Mario Andretti - German Formula 1 Grand Prix, Dutch Formula 1 Grand Prix, Italian Formula 1 Grand Prix 1982 - photo-etched parts, resin parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts and assembly instructions - for Fujimi references FJ090320, 09032, GP-1, FJ960098, FJ09033, FJ090337, FJ09039, FJ09085, FJ09163, GPSP-31, FJ091945, FJ960098, GP-1 and FJ96009

Studio27 Reference: ST27-TK2065

Transkit to almost completely transform the Ferrari 126C2 Fujimi kit and turn it into a much more faithful reproduction of the single seater used by Ferrari in the last races of the 1982 season, where it won the constructors' title with up to 4 drivers in its ranks, after the tragic loss of Gilles Villeneuve. New parts for the floor, monocoque, bodywork, rims, brakes, radiators, parts for the upper part of the engine... to which we must add a complete sheet of decals and photo-etched parts. Whether or not you are a Ferrari fan, what a blast!
Click here for more details
Studio27: Detail up set 1/20 scale - McLaren Honda MP4/4 McLaren Racing Limited Team - FIA Formula 1 World Championship 1988 - photo-etched parts and assembly instructions - for Tamiya references TAM20022, TAM89719 and TAM92208 image

Studio27: Detail up set 1/20 scale - McLaren Honda MP4/4 McLaren Racing Limited Team - FIA Formula 1 World Championship 1988 - photo-etched parts and assembly instructions - for Tamiya references TAM20022, TAM89719 and TAM92208

Studio27 Reference: ST27-FP20165

New limited-time re-edition of these photo-etched parts designed for the different references of the 1/20 scale McLaren Honda MP4/4 Tamiya kit. Among other elements, the photo-etched plate includes the radiator grilles, the flaps, the Honda emblems that go on the engine covers, the wings side planes both front and rear... and much more. Don't let them pass!
Click here for more details
Studio27: Detail up set 1/20 scale - McLaren Honda MP4/5B McLaren Racing Limited Team - photo-etched parts and assembly instructions - for Tamiya references TAM20026, TAM89720 and TAM92209 image

Studio27: Detail up set 1/20 scale - McLaren Honda MP4/5B McLaren Racing Limited Team - photo-etched parts and assembly instructions - for Tamiya references TAM20026, TAM89720 and TAM92209

Studio27 Reference: ST27-FP20166

New limited-time re-edition of the Studio27 photo-etched parts designed for the Tamiya kit of the McLaren Honda MP4/5B in 1/20 scale. The radiator panels or the planes of the spoilers, among other elements, will gain in detail, with a thickness more in line with reality. Don't miss out on them!!
Click here for more details
Studio27: Detail up set 1/24 scale - Fiat 500F - photo-etched parts and assembly instructions - for Tamiya references TAM24169, TAM89655 and 24169 image

Studio27: Detail up set 1/24 scale - Fiat 500F - photo-etched parts and assembly instructions - for Tamiya references TAM24169, TAM89655 and 24169

Studio27 Reference: ST27-FP24239

Re-edition of the photo-etched plate to use with the different references of the Tamiya kit of the Fiat 500F. Don't hesitate for a second to use these photo-etched plates to improve the detailing and give your model a very real look. Among many other details, it includes window frames, windshield wipers, various grilles, door panel handles... and much more. Essential!
Click here for more details
Studio27: Marking / livery 1/20 scale - Toyota Celica LB Turbo Group 5 Schnitzer Team sponsored by Rodenstock #1, 6 - Rolf Stommelen (DE), Harald Ertl (AT) + Rolf Stommelen (DE) - Nürburgring 1000 Kilometres, Deutsche Rennsport Meisterschaft DRM 1978 - water slide decals and placement instructions - for Tamiya references TAM20009 and TAM20072 image

Studio27: Marking / livery 1/20 scale - Toyota Celica LB Turbo Group 5 Schnitzer Team sponsored by Rodenstock #1, 6 - Rolf Stommelen, Harald Ertl + Rolf Stommelen - Nürburgring 1000 Kilometres, Deutsche Rennsport Meisterschaft DRM 1978 - water slide decals and placement instructions - for Tamiya references TAM20009 and TAM20072

Studio27 Reference: ST27-DC1247

In its second season participating in the German DRM Championship, the brutal Toyota Celica LB Turbo Group B changed its colours for more striking ones, going from blue to red. Taking advantage of the re-edition of the Tamiya kit at 1/20 scale, Studio27 has prepared a decal sheet that allows you to make the 1978 versions, both those used in the German DRM races with the number #1, and the one used in the Nürburgring 1000 Kilometres, a race belonging to the World Championship for Makes, where the number used was #6.
Click here for more details
Studio27: Marking / livery 1/20 scale - Porsche 935 K2 Kremer Racing Team sponsored by Vaillant #70 - Peter Gregg (US) - Deutsche Rennsport Meisterschaft DRM 1977 - water slide decals and placement instructions - for Tamiya references TAM20008 and TAM20071 image

Studio27: Marking / livery 1/20 scale - Porsche 935 K2 Kremer Racing Team sponsored by Vaillant #70 - Peter Gregg - Deutsche Rennsport Meisterschaft DRM 1977 - water slide decals and placement instructions - for Tamiya references TAM20008 and TAM20071

Studio27 Reference: ST27-DC1248

Tamiya's re-edition of the Porsche 935 K2 kit at 1/20 scale has been great news, but those of us who are more veterans remember that the original kit included a second decoration option, corresponding to the "white" version by Vaillant. Do you like the white version better, or do you simply feel like building a second variant of the Porsche? Well now you can, thanks to this decal sheet that Studio27 has prepared with the necessary logos to make the version that raced in the German DRM during the second part of the 1977 season.
Click here for more details
Tabu Design: Marking / livery 1/20 scale - Toyota Celica LB Turbo Group 5 - water slide decals - for Tamiya references TAM20009 and TAM20072 image

Tabu Design: Marking / livery 1/20 scale - Toyota Celica LB Turbo Group 5 - water slide decals - for Tamiya references TAM20009 and TAM20072

Tabu Design Reference: TABU20162

As is customary in Tamiya's re-editions of its most "classic" references, some of the logos of the original decoration are not included in the decals... but don't worry! Tabu Design has taken care to create a small complementary sheet with the Castrol, Dunlop or Shell logos, so that you do not miss any of them when completing your Tamiya Toyota Célica LB Turbo kit at 1/20 scale. Now they are all there!
Click here for more details

Solido: Diecast model car 1/18 scale - Renault 5 GT Turbo MK1 Red 1985 - metal parts, plastic parts and rubber parts

Solido Reference: DIE-60082

Assembled collector's model that reproduces the first generation of the Renault 5 GT Turbo, a model that marked many young drivers eager for strong emotions in the mid-80s.
Click here for more details

Solido: Diecast model car 1/18 scale - Renault 5 GT Turbo MK2 Blue 1989 - metal parts, plastic parts and rubber parts

Solido Reference: DIE-60083

Assembled collector's model that reproduces the second generation of the Renault 5 GT Turbo, where not only were new five-spoke wheels mounted, but the moldings, bumpers and plastic grilles were painted in the same color as the body.
Click here for more details
Solido: Diecast model car 1/18 scale - Peugeot 306 Maxi Kronos Team sponsored by Lifelive #2 - Thierry Neuville (BE) + Antoine Cornet (BE) - Eifel Rallye Festival 2022 - metal parts, plastic parts and rubber parts image

Solido: Diecast model car 1/18 scale - Peugeot 306 Maxi Kronos Team sponsored by Lifelive #2 - Thierry Neuville + Antoine Cornet - Eifel Rallye Festival 2022 - metal parts, plastic parts and rubber parts

Solido Reference: DIE-60084

Assembled collector's model that reproduces the version of the Peugeot 306 Maxi used by Thierry Neuville in the Eifel Festival Rally held in Germany, an event outside of his participation in the World Championship as an official Hyundai driver.
Click here for more details

Solido: Diecast model car 1/18 scale - Peugeot 306 Maxi 1996 - metal parts, plastic parts and rubber parts

Solido Reference: DIE-60085

Assembled collector's model that reproduces the white version of the Peugeot 306 Maxi from 1996, ideal for carrying out the most diverse transformations and painting the model with the decoration you have in mind.
Click here for more details

Solido: Diecast model car 1/18 scale - BMW M3 E30 Group A 1989 - metal parts, plastic parts and rubber parts

Solido Reference: DIE-60086

Assembled collector's model that reproduces the white version of the 1989 BMW M3 E30 group A circuit, ideal for carrying out the most diverse transformations and painting the model with the decoration you have in mind.
Click here for more details
Italeri: Special vehicle scale model kit 1/24 scale - Ford 9000 US Wrecker truck - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Italeri: Special vehicle scale model kit 1/24 scale - Ford 9000 US Wrecker truck - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Italeri Reference: 3825

New time limited re-edition of this spectacular American crane truck based on a Ford 9000. If you like it, do not miss it!!
Click here for more details
Italeri: Trailer scale model kit 1/24 scale - Cargo trailer - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Italeri: Trailer scale model kit 1/24 scale - Cargo trailer - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Italeri Reference: 3885

Nothing better than a good semi-trailer to complement any of Italieri's trucks cabs. On this occasion, we can opt for two different decorations, and take advantage of its detailed chassis, including the rubber wheels and the side impact protection system.
Click here for more details
Italeri: Tractor head scale model kit 1/24 scale - Freightliner FLD 120 Special - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Italeri: Tractor head scale model kit 1/24 scale - Freightliner FLD 120 Special - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Italeri Reference: 3925

Super American truck with double deck that Revell puts on our workbenches. The kit also includes spectacular and exquisitely printed decals.
Click here for more details

Italeri: Tractor head scale model kit 1/24 scale - Iveco Stralis 480 Hi-Way Euro 5 Low roof - plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Italeri Reference: 3928

New version of the Iveco Stralis 480 Hi-Way Euro 5, now with a low roof. Includes fully detailed chassis, engine and interior, plus an extensive decal sheet.
Click here for more details
Studio27: Marking / livery 1/24 scale - Alfa Romeo 155 V6 TI Engstler Motorsport Team sponsored by Castrol #25, 26 - Franz Engstler (DE), Carsten Struwe (DE) - DTM 1994 - water slide decals and placement instructions - for Tamiya references TAM24137, TAM24148, TAM24176, TAM24182, TAM96356 and TAM96357 image

Studio27: Marking / livery 1/24 scale - Alfa Romeo 155 V6 TI Engstler Motorsport Team sponsored by Castrol #25, 26 - Franz Engstler, Carsten Struwe - DTM 1994 - water slide decals and placement instructions - for Tamiya references TAM24137, TAM24148, TAM24176, TAM24182, TAM96356 and TAM96357

Studio27 Reference: ST27-DC781D

Decal sheet to reproduce, based on the Alfa Romeo 155 V6 TI Tamiya kit, the version used by the Engstler Motorsport team in the first DTM races of the 1994 season, the team obtaining a tenth place in the first round of the event held at the Norisring circuit as the best result.
Click here for more details
Nunu: Car scale model kit 1/24 scale - BMW 320i E46 Carly Motors Team sponsored by Watsons Water #6 - Duncan Huisman (NL) - Guia Race of Macau 2001 - paint masks, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Nunu: Car scale model kit 1/24 scale - BMW 320i E46 Carly Motors Team sponsored by Watsons Water #6 - Duncan Huisman - Guia Race of Macau 2001 - paint masks, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Nunu Reference: PN24041

Nunu's new reference of the beautiful BMW 320i E46 in the Superproduction category, choosing on this occasion the winning version of the 2001 Macau race. In the box of this kit you will find an extensive exploded view that includes all the underbody of the car, the suspensions, the passenger compartment with the bucket seat and the complex safety bars and wheels with low profile tires.
Click here for more details

Ixo Models: Diecast model car 1/18 scale - Toyota Celica Turbo 4WD (ST185) Toyota Team Europe TTE Team sponsored by Castrol #1 - Juha Kankkunen + Juha Piironen - Safari Rally 1993 - metal parts, plastic parts and rubber parts

Ixo Models Reference: DIE-60094

Assembled collector's model that reproduces the version of the Toyota Celica Turbo 4WD Group A with which Juha Kankkunen participated and obtained victory in the 1993 Safari Rally, being the first of the five he obtained that season, which allowed him to achieve his fourth crowned World Rally Champion.
Click here for more details
Ixo Models: Diecast model car 1/18 scale - Toyota Celica GT-Four ST165 sponsored by Bastos #5 - Renaud Verreydt (BE) + Georges Biar (BE) - Lotto Haspengouw Rally 1990 - plastic parts and rubber parts image

Ixo Models: Diecast model car 1/18 scale - Toyota Celica GT-Four ST165 sponsored by Bastos #5 - Renaud Verreydt + Georges Biar - Lotto Haspengouw Rally 1990 - plastic parts and rubber parts

Ixo Models Reference: DIE-60095

Assembled collector's model that reproduces the version of the Toyota Celica GT-Four ST165 Group A with which Renaud Verreydt participated in the Lotto Haspengouw Rally in 1990, where he had to abandon after suffering a road accident.
Click here for more details

Ixo Models: Diecast model car 1/18 scale - Ford Escort RS Cosworth Jolly Club Team sponsored by Martini #6 - Gianfranco Cunico + Stefano Evangelisti - Sanremo Rally 1994 - plastic parts and rubber parts

Ixo Models Reference: DIE-60096

Assembled collector's model that reproduces the version of the Ford Escort RS Cosworth Group A with which Gianfranco Cunico participated in the 1994 San Remo Rally, achieving sixth final position.
Click here for more details
Ixo Models: Diecast model car 1/18 scale - Ford Sierra RS Cosworth Group A sponsored by Andrews Sykes #33 - Russell Brookes (GB) + Neil Wilson (GB) - Lombard RAC Rally 1989 - plastic parts and rubber parts image

Ixo Models: Diecast model car 1/18 scale - Ford Sierra RS Cosworth Group A sponsored by Andrews Sykes #33 - Russell Brookes + Neil Wilson - Lombard RAC Rally 1989 - plastic parts and rubber parts

Ixo Models Reference: DIE-60097

Assembled collector's model that reproduces the version of the Ford Sierra RS Cosworth Group A with which Russell Brookes participated in the 1989 Lombard RAC Rally, where he had to abandon after suffering an engine failure.
Click here for more details
Ixo Models: Diecast model car 1/18 scale - Audi Quattro Group 4 Audi Sport Team sponsored by Castrol #3 - Hannu Mikkola (FI) + Arne Hertz (SE) - 1000 Lakes Finland Rally 1982 - plastic parts and rubber parts image

Ixo Models: Diecast model car 1/18 scale - Audi Quattro Group 4 Audi Sport Team sponsored by Castrol #3 - Hannu Mikkola + Arne Hertz - 1000 Lakes Finland Rally 1982 - plastic parts and rubber parts

Ixo Models Reference: DIE-60099

Assembled collector's model that reproduces the version of the Audi Quattro Group 4 with which Hannu Mikkola participated in the 1000 Lakes Rally of Finland in 1982, where he won ahead of his teammate Stig Blomqvist. Audi's dominance was total, leaving third place already more than 4 minutes away.
Click here for more details