Newsletter 607: Happy peopleMarch 14^th, 2024

This is a limited edition decal.

Two complete decals sheets with carbon fiber patterns for the cockpit, engine areas, monocoque, spoilers, and many many more. Stop trimming carbon fiber decals by hand and indulge yourself using these perfectly fitting ones from Studio27.

Complete set of decals, composed of three different sheets, with carbon fibre and Kevlar patterns to be used on the veteran Tamiya Williams Renault FW13B kit.

Fantastic MFH kit where, as usual, several materials are combined, including resin, white metal, turned metal parts, photo-etched parts, rubber tires, different cables and materials to recreate the pipes and connections, a complete decal sheet that includes the carbon patterns for the monocoque and other chassis parts, and even the engine control unit is 3D printed with an incredible level of detail. Accessories used in the pits are included in the kit, such as a lap graphics board, a starter battery, a printer, etc. The chosen version is the one used in the Brazilian GP, the first race of the 1988 season, in which Nelson Piquet obtained third place and Satoru Nakajima sixth. This was the same year that the Jacarepaguá circuit was renamed “Autódromo Internacional Nelson Piquet” as a tribute to Nelson Piquet after winning his third F1 World Champion title in 1987.

Decals newly designed, revised and printed in Japan so you can replace the old decals on your Tamiya kit of the Nissan Primera.

This decal sheet is designed to replace those of the Lotus 97T Fujimi kit in any of its versions, and allows you to choose between the decoration used in the Portuguese GP or the Belgian GP. The color chosen for the logos is the same dark beige as the real car. Being designed from scratch, this decal sheet includes some logos not included in the original kit decals. Since the original Fujimi kit has a slightly incorrect shape at the rear end of the hood, the decal instructions include how to modify it, and decals for that area whether you carry out the modification or not and decide to leave the hood as it comes with the kit.

Decoration of the Ford Sierra Cosworth RS500 Group A sponsored by Hurchison that, in the hands of Andy Rouse, participated in the 1989 Macau race, achieving second position despite having problems with the shock absorbers of his car in the final race. In addition to the decal sheet, a resin piece is included to replace the dashboard of the Tamiya kit with the correct one with right-hand drive.

Decoration of the Toyota Corona ST191 sponsored by Energizer that participated in the Guia Race in Macau in 1994, achieving third final position.

Decal sheet to make the version of the Volvo 240 Turbo that achieved victory (number #6) in the 1985 Macau race. A race that was mostly decided even before the start, since two of the big favorites to victory they had to retreat without starting. The first was Ravaglia, who broke the clutch of his BMW, and the second was the teammate of the eventual winner, Lindström (number #7), whose Volvo had electrical problems. And the start ended up defining the winner, when Berger had a bad start, getting trapped behind several inferior Japanese cars that he had to overtake, but by then Brancatelli was already too far away.

Decoration to make the Mercedes Benz AMG GT3 of the Mercedes-AMG HTP Motorsport team that took part in the 2017 24 Hours of Nürburgring, drawing attention to the immense chronograph watch labeled on the roof.

New version of the Iveco Stralis 480 Hi-Way Euro 5, now with a low roof. Includes fully detailed chassis, engine and interior, plus an extensive decal sheet.

Reissue of the Tamiya kit of the friendly and legendary Fiat 500F, which marked an entire era, especially in Italy itself. On this occasion, Tamiya accompanied the detailed part list of the kit, which includes the engine with its folding hood and which could be partially open to improve cooling, with a renewed sheet of decals that allow the model to be customized.

We present you the carbon fiber patterns designed by Studio27 to use in the 1/12 scale Kawasaki Ninja H2 Carbon. Wonderful !!!

Modern Formula 1 have the carbon fiber as a fundamental component. And what happens to your scale model? How could you not use these precious carbon fibre patterns that Studio27 has just reissued for a limited time?

Three interesting decal sheets with the carbon patterns of the Tamiya Mercedes Benz AMG GT3. Driver's seat, dashboard, rear tray, front spoiler, inside of the headlights, the rear diffuser... and even each of the vertical ribs of the front grille. No carbon part is left uncovered with this set. Do not miss it!!

In modern cars there are most parts in which different types of fibers and patterns are used for their manufacture. Studio27 offers us a set of decals with all the kevlar and carbon fiber patterns to use on the Tamiya Sauber Mercedes C9 models, with pre-cut patterns adapted to the different parts, both for the mechanical part, as well as for the interior and the bodywork. Essential!

Set of tire warmers for your MotoGP models, which are printed with a softer and more flexible resin that will allow you to place them on the tires of the model, as if they were real warmers. The set includes 2 different types of temperature controllers and 2 different decal sheets (white/black) so you can paint the warmers in the color you prefer. Also includes cable to complete the assembly of the controllers. Absolutely spectacular!

Set of 4 asymmetrical rain tires with the design corresponding to the one used in the 1991 and 1992 seasons. The tires have been developed to be used with the Benetton Ford B192 Tamiya kit, although they may also be valid for other Tamiya models. Rims not included.

Set of 4 symmetrical rain tires with the design corresponding to the one used between the 1985 and 1991 seasons. The tires have been developed to be used with the Ferrari F189 Tamiya kit, although they may also be valid for other Tamiya models. Rims not included.

Set of 4 Bridgestone Formula 1 rain tyres with the design used between the 2005 and 2011 seasons. This set of tyres is not designed for a specific model, so it may be necessary to adapt the rims of the kit to fit the tyres. Rims not included.

Set of 4 rims designed for Fujimi's 1/20 scale kits of the Williams Renault FW14, and to transform it into the FW14B. The set contains two front rims, two rear rims, 4 center nuts with stems and air valves.

Replacement seat for the Tamiya kit of the Tyrrell P34 sponsored by Elf, where each and every one of the multiple holes that were used in some races of the 1976 season have been reproduced. In addition, all four of the holes have also been added for the passage of the harnesses, absent in the original piece of the kit.

Set of 3D printed parts to be able to assemble up to 10 units of seat belts for your street models. The separation of the anchoring element into two pieces allows easy painting of the release button in another color, in addition to allowing the buckle to be easily mounted if necessary. Attached is a strip of black fabric approximately 40cm long by 2mm wide.

In the 60s, in the automobile world, design prevailed over other features, and that trend also reached gas stations, where the pumps of each of the brands became a symbol of differentiation. If you are a lover of the 60s, don't miss the opportunity to accompany any of your models with one of the pumps that the Firebird oil company had in its service stations. Reproduced in great detail by DAB Models, they include the decals with the logos and the counter clock for litres of fuel refuelled and a practical pre-cut acetate to simulate glass. Do not miss yours!

In the 60s, in the automobile world, design prevailed over other features, and that trend also reached gas stations, where the pumps of each of the brands became a symbol of differentiation. If you are a lover of the 60s, don't miss the opportunity to accompany any of your models with one of the pumps that the Mobilgas oil company had in its service stations. Reproduced in great detail by DAB Models, they include the decals with the logos and the counter clock for litres of fuel refuelled and a practical pre-cut acetate to simulate glass. You dare?

In the 60s, in the automobile world, design prevailed over other features, and that trend also reached gas stations, where the pumps of each of the brands became a symbol of differentiation. If you are a lover of the 60s, don't miss the opportunity to accompany any of your models with one of the pumps that the Shell oil company had in its service stations. Reproduced in great detail by DAB Models, they include the decals with the logos and the counter clock for litres of fuel refuelled and a practical pre-cut acetate to simulate glass. Precious!

3D printed figure of a late 80s/early 90s F1 driver with helmet in hand (based on Nigel Mansell's pose). In addition to the figure, the set includes a full-face helmet with an open visor, recreated in pre-cut acetate, and digitally printed decals with Nigel Mansell's sponsors during the 1991 and 1992 seasons at the controls of the Williams FW14 and FW14B, so it is the ideal figure to combine with the kits of these models.

1/20 scale figure printed with 3D technology of an F1 driver from the 60s, without a helmet and with his hands in his pockets (based on Graham Hill's pose at the 1962 Monaco GP or the Grand Prix Brittany 1963). This figure is ideal to combine with the F1 models of the BRM or the Lotus from the 60s. Digital printing decals with the sponsors and stripes of the suit are included.

Chain and gear assembly to replace the parts of the Tamiya Honda RC213V kit. Printed using 3D technology, the chain is open allowing the insertion of the front and rear sprockets without any difficulty. The front and rear sprockets as well as the crown detailing screws are printed as separate parts.

Set of rims to improve the appearance and detail of the Honda RC213V Tamiya kit. The design of the rims faithfully reproduces all aspects of the real ones, manufactured expressly for the HRC team, in order to save weight and improve traction and stability. Included are the inflation valves, which have been printed on the inner frame of the rim.

Decoration of the Ford Escort WRC of the Bastos team that achieved third position in the 1997 Condroz Rally. The decals and resin parts to transform the kit into the WRC version are designed to be used on the Tamiya kits or on the re- edition made by Domino.

Set of 4 Speedline rims with 8 spokes and 5 nuts, similar to those used for example in Subaru Gr.A and WRC. The set also includes complete brake discs and gravel tires, The outer diameter of the rim is approximately 18 mm, while the diameter of the tire is 27 mm. The width of the set is approximately 10.5 mm.

A classic to continue transforming the Tamiya kit of the Ford Escort RS Cosworth into any of the WRC versions, where the most important changes at the body level were carried out in the front bumper and in the configuration of the rear spoiler, which are precisely the parts that are included in this transkit.