Newsletter 603: RCBooks 037

RCBooks 037

RCBooks 037
The boss is very very very excited since RCBooks told us know that they have a new book ready, this time about nothing less than the Lancia Rally 037, with their usual printing quality, information density, pictures and illustrations, all in 512 gorgeous pages.

You can now reserve the book at SpotModel, and with a little luck (if the strikes across Europe allow it) they will be on our shelves by the end of this month of February. Later, aproximately by late March, we will receive the numbered and autographed Limited Edition, which includes 20 additional fine art prints.

But there is more, since there will be a small, even more limited print run called Owner's Edition that, in addition to the above, will also include a 3D printed model of the vehicle's chassis (Stradale, EVO1 and EVO2, depending of the product) that has been produced by KMP. It will be a really very exclusive series that will soon be available for pre-order at SpotModel. If you are interested, activate the product notification on our website now, because only around 30 units will be produced, and there will not be enough for everyone.

Do you understand now why the boss of SpotModel is so excited?

RC Books: Book - Lancia Rally 037 Group B - Standard Edition image

RC Books: Book - Lancia Rally 037 Group B - Standard Edition

RC Books Reference: RCBOOK-08

Bibliographic and reference book of the Lancia Rally 037 Group B, with texts in Italian and English, and which includes 512 pages, more than 250 photographs, about 100 illustrations, original documentation from the technical department, comments and opinions of the main protagonists, almost 250 pages dedicated to the development of the car step by step, and a lot of information about what is one of the most fantastic Italian rally cars of all time. Without a doubt, it cannot be missing from your library!
Click here for more details
RC Books: Book - Lancia Rally 037 Group B - Limited Edition image

RC Books: Book - Lancia Rally 037 Group B - Limited Edition

RC Books Reference: RCBOOK-09

Bibliographic and photographic reference book of the Lancia Rally 037 Group B, with texts in Italian and English, and which includes 512 pages, more than 250 photographs, about 100 illustrations, original documentation from the technical department, comments and opinions of the main protagonists, almost 250 pages dedicated to the development of the car step by step, and a lot of information about what is one of the most fantastic Italian rally cars of all time. The limited edition, numbered and autographed, includes 20 additional paper prints and one large size reproduction. How can you not want to indulge!
Click here for more details

RC Books: Book - Lancia Rally 037 Group B - Owner's Edition STRADALE

RC Books Reference: RCBOOK-10-STRADALE

The "Exclusive" edition is much more than the book full of great reference photos of the Lancia Rally 037 Group B. or the series of 20 exclusive plates... and it is for the most passionate about one of the most fantastic Italian cars of all-time rally RC Books has prepared something truly special... and exclusive! Apart from some impressive large prints, 1/24 scale reproduction of the 037 STRADALE chassis will be included, which will delight even the most detailed enthusiasts. So if you are one of those unconditional lovers of the Lancia 037, do not hesitate, since this edition will be very reduced, and unrepeatable!
Click here for more details

RC Books: Book - Lancia Rally 037 Group B - Owner's Edition EVO1

RC Books Reference: RCBOOK-10-EVO1

The "Exclusive" edition is much more than the book full of great reference photos of the Lancia Rally 037 Group B. or the series of 20 exclusive plates... and it is for the most passionate about one of the most fantastic Italian cars of all-time rally RC Books has prepared something truly special... and exclusive! Apart from some impressive large prints, 1/24 scale reproduction of the 037 EVO1 chassis will be included, which will delight even the most detailed enthusiasts. So if you are one of those unconditional lovers of the Lancia 037, do not hesitate, since this edition will be very reduced, and unrepeatable!
Click here for more details

RC Books: Book - Lancia Rally 037 Group B - Owner's Edition EVO2

RC Books Reference: RCBOOK-10-EVO2

The "Exclusive" edition is much more than the book full of great reference photos of the Lancia Rally 037 Group B. or the series of 20 exclusive plates... and it is for the most passionate about one of the most fantastic Italian cars of all-time rally RC Books has prepared something truly special... and exclusive! Apart from some impressive large prints, 1/24 scale reproduction of the 037 EVO2 chassis will be included, which will delight even the most detailed enthusiasts. So if you are one of those unconditional lovers of the Lancia 037, do not hesitate, since this edition will be very reduced, and unrepeatable!
Click here for more details
Stone Models: Rims 1/12 scale - Honda RC213V - 3D printed parts - for Tamiya reference TAM14130 - 1 + 1 units image

Stone Models: Rims 1/12 scale - Honda RC213V - 3D printed parts - for Tamiya reference TAM14130 - 1 + 1 units

Stone Models Reference: A045-2024

Set of rims to improve the appearance and detail of the Honda RC213V Tamiya kit. The design of the rims faithfully reproduces all aspects of the real ones, manufactured expressly for the HRC team, in order to save weight and improve traction and stability. Included are the inflation valves, which have been printed on the inner frame of the rim.
Click here for more details
Italeri: Tractor head scale model kit 1/24 scale - DAF 95 Master Truck - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Italeri: Tractor head scale model kit 1/24 scale - DAF 95 Master Truck - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Italeri Reference: 788

Re-edition of this Italeri kit of one of the most successful trucks from the manufacturer DAF. As is usual at Italeri, the part list of the kit is very extensive, allowing any area of the truck to be detailed, from the chassis and its mechanical components, as well as the engine and cabin.
Click here for more details
USCP: Detail 1/24 scale - Volvo S40 - Front Grill - 3D printed parts - for Nunu reference PN24034 - 1 units image

USCP: Detail 1/24 scale - Volvo S40 - Front Grill - 3D printed parts - for Nunu reference PN24034 - 1 units

USCP Reference: 24A086

3D printed front grille to replace the original part included in Volvo S40 Nunu kit. The difference with respect to the original piece is notable, thanks to a much thinner design of its vertical bars that allows the grill to be hollow and can be seen through it, but above all, due to a better definition of the Volvo emblem on grill.
Click here for more details
USCP: Detail up set 1/24 scale - Fiat 500F - Interior detail-up set - 3D printed parts - for Tamiya references TAM24169, TAM89655 and 24169 - 1 units image

USCP: Detail up set 1/24 scale - Fiat 500F - Interior detail-up set - 3D printed parts - for Tamiya references TAM24169, TAM89655 and 24169 - 1 units

USCP Reference: 24A087

We are delighted with the re-edition of the Tamiya Fiat 500F kit, but since it maintains the same configuration and part list, why not take the opportunity to improve it in some of its details? For example, what if we had the door handles, the handles to open them or the crank to lower the window? What if you also add the pedals, the cranks for the opening rear windows or the dashboard ashtray? If we can even have the car's starting key! Well, you already have all this in this complete set to detail your model of the Tamiya Fiat 500F. Don't wait to get one!
Click here for more details
USCP: Detail 1/24 scale - Fiat 500F - Rear window louvers - 3D printed parts - for Tamiya references TAM24169, TAM24173, TAM89655, 24169 and TAM89675 - 1 units image

USCP: Detail 1/24 scale - Fiat 500F - Rear window louvers - 3D printed parts - for Tamiya references TAM24169, TAM24173, TAM89655, 24169 and TAM89675 - 1 units

USCP Reference: 24A088

3D printed piece to reproduce the rear window louvers, designed to be mounted on the Tamiya kits of the Fiat 500F and the Abarth 695SS at 1/24 scale.
Click here for more details
Number Five: Paint for airbrush - MP4-12C Orange - 1 x 30ml - for Fujimi references FJ12555, FJ125558, RS-44, FJ125633, 12563, RS-41, FJ125701, 12570, RS-74, FJ125879 and RS-62 image

Number Five: Paint for airbrush - MP4-12C Orange - 1 x 30ml - for Fujimi references FJ12555, FJ125558, RS-44, FJ125633, 12563, RS-41, FJ125701, 12570, RS-74, FJ125879 and RS-62

Number Five Reference: N5-C205

Orange color tone formulated exactly to that used in the McLaren MP4-12C. This paint has been developed to be used, for example, on Fujimi kits.
Click here for more details
Number Five: Paint for airbrush - Aston DB5 Silver - 1 x 30ml - for Revell reference REV05653 image

Number Five: Paint for airbrush - Aston DB5 Silver - 1 x 30ml - for Revell reference REV05653

Number Five Reference: N5-C206

Silver tone formulated exactly to that used in the Aston Martin DB5 from the James Bond films. This paint has been developed to be used, for example, on Revell kits.
Click here for more details
Studio27: Detail up set 1/20 scale - McLaren Honda MP4/4 McLaren Racing Limited Team - FIA Formula 1 World Championship 1988 - photo-etched parts and assembly instructions - for Tamiya references TAM20022, TAM89719 and TAM92208 image

Studio27: Detail up set 1/20 scale - McLaren Honda MP4/4 McLaren Racing Limited Team - FIA Formula 1 World Championship 1988 - photo-etched parts and assembly instructions - for Tamiya references TAM20022, TAM89719 and TAM92208

Studio27 Reference: ST27-FP20165

New limited-time re-edition of these photo-etched parts designed for the different references of the 1/20 scale McLaren Honda MP4/4 Tamiya kit. Among other elements, the photo-etched plate includes the radiator grilles, the flaps, the Honda emblems that go on the engine covers, the wings side planes both front and rear... and much more. Don't let them pass!
Click here for more details
Tamiya: Car scale model kit 1/24 scale - Fiat Abarth 695SS - paint masks, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Tamiya: Car scale model kit 1/24 scale - Fiat Abarth 695SS - paint masks, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Tamiya Reference: TAM24173

Re-edition of the Fiat Abarth 695 SS Tamiya kit, which includes new decals, instruction manual and masks. The Fiat Abarth 695SS was one of the most famous creations of the renowned tuner Carlo Abarth, based on the modest 500. Despite its small size, or perhaps precisely because of it, and by modifying sections such as the engine and suspension, Abarth achieved a great success in touring car racing at the time with the 695SS. The model has a highly detailed parts list, which includes the engine under its folding rear hood.
Click here for more details
Tamiya: Car scale model kit 1/24 scale - Alfa Romeo Giulia Sprint GTA - paint masks, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Tamiya: Car scale model kit 1/24 scale - Alfa Romeo Giulia Sprint GTA - paint masks, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Tamiya Reference: TAM24188

Tamiya has decided to re-edit the kit of the Alfa Romeo Giulia Sprint GTA, a model intended for racing launched in 1965 that had an aluminium body (it weighed 205 kg less than the GT version) and an engine with a double ignition system. Taking advantage, Tamiya has updated some of the components of the kit, such as the decals or the instruction manual, in addition to including masks for painting the moldings of the front and rear windows. Now, in addition to the standard version, you can also mount the customized version in which the front and rear bumpers are removed. A great way to commemorate the 60th anniversary of the Giulia!
Click here for more details
Tamiya: Car scale model kit 1/24 scale - Mercedes-Benz 300SL Gullwing Full-View - plastic parts, rubber parts, assembly instructions and painting instructions image

Tamiya: Car scale model kit 1/24 scale - Mercedes-Benz 300SL Gullwing Full-View - plastic parts, rubber parts, assembly instructions and painting instructions

Tamiya Reference: TAM24366

If you like mechanical parts and classic cars, this reference will suit you like a glove. What's better than a Mercedes 300 SL showing its insides thanks to its totally transparent body? That is precisely what you will find in this new Tamiya reference, so that you can appreciate in detail the engine, transmission, chassis, suspensions, and also the luxurious interior of this legendary car.
Click here for more details
Tamiya: Motorbike scale model kit 1/12 scale - Honda Dax 125 sponsored by Tamiya - metal parts, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions image

Tamiya: Motorbike scale model kit 1/12 scale - Honda Dax 125 sponsored by Tamiya - metal parts, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Tamiya Reference: TAM14142

New addition to Tamiya's 1/12 scale motorcycle range. The one chosen this time is the small 125 cc Honda Dax, a motorcycle that follows the concept of the popular Monkey. The Honda Dax was launched on the market in 1969, and was characterized by its distinctive T-shaped chassis made of pressed steel. which housed the fuel tank. Apart from the decals necessary to make the special Tamiya version of this bike, you can also build the standard version.
Click here for more details
Belkits: Display case 1/24 scale - Display case for 1/24 scale model cars image

Belkits: Display case 1/24 scale - Display case for 1/24 scale model cars

Belkits Reference: BEL-ACC001

Protect your kits from dust and dirt with this plastic case. Features a black plastic base, and a transparent plastic case, measuring 232 x 120 x 86 mm.
Click here for more details
Aoshima: Car scale model kit 1/24 scale - Liberty Walk LB Works Nissan R35 GT-R Type 2 Ver. 2 - paint masks, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Aoshima: Car scale model kit 1/24 scale - Liberty Walk LB Works Nissan R35 GT-R Type 2 Ver. 2 - paint masks, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Aoshima Reference: 55922

Liberty Walk customizes to suit the client, so their models do not have to be the same. This is the case of the Nissan R35 GT-R, which has a second version, which on the other hand is still gorgeous. The kit includes everything needed to assemble version 2 of type 2, such as the rims made in two parts, the exhausts and the detailed underbody, its also personalized interior... and with a decal sheet for a very recognizable decoration. The black with red bands from the Yokohama Advan tires.
Click here for more details
Decalcas: Logotypes 1/12 scale - Thermal stickers - water slide decals image

Decalcas: Logotypes 1/12 scale - Thermal stickers - water slide decals

Decalcas Reference: DCL-LOG010

An extensive decal sheet with different types of thermal stickers used especially in Formula 1 but also in GTs, moto GPs, and Rally cars in 1/12 scale. Decalcas wanted to go a step further and these decals are proof of it: The definition and detail of the decal is absolutely above the usual, but in order to appreciate and enjoy the detail and realism of the design, we recommend using a magnifying glass. It's amazing !!!
Click here for more details
Studio27: Detail up set 1/24 scale - Ferrari F40 Competizione - photo-etched parts and assembly instructions - for Tamiya reference TAM24284 image

Studio27: Detail up set 1/24 scale - Ferrari F40 Competizione - photo-etched parts and assembly instructions - for Tamiya reference TAM24284

Studio27 Reference: ST27-FP24238

Photo-etched sheet with some essential components to improve the detailing of the Tamiya kit of the competition version of the Ferrari F40 sponsored by Shell. Grilles, radiators, sliding window frames, skirts, the characteristic gearshift guide grille, pedals, are just some of the many details that are included. Are you going to miss them?
Click here for more details
Studio27: Marking / livery 1/24 scale - Porsche 935 Martini Racing Team #1, 9 - Jacques Bernard 'Jacky' Ickx (BE) + Jochen Mass (DE) - 6 Hours Silverstone, 6 Hours Vallelunga 1976 - photo-etched parts, resin parts, rubber parts, seatbelt fabric, vacuum formed parts, water slide decals, white metal parts, other materials and assembly instructions - for Tamiya references TAM24328 and TAM24334 image

Studio27: Marking / livery 1/24 scale - Porsche 935 Martini Racing Team #1, 9 - Jacques Bernard 'Jacky' Ickx + Jochen Mass - 6 Hours Silverstone, 6 Hours Vallelunga 1976 - photo-etched parts, resin parts, rubber parts, seatbelt fabric, vacuum formed parts, water slide decals, white metal parts, other materials and assembly instructions - for Tamiya references TAM24328 and TAM24334

Studio27 Reference: ST27-TK2476

A beast was born, which was to mark an entire era in the Gt's championships. It was the Porsche 935, dressed in Martini war colors. Thanks to this complete transkit, it is now possible to make this version from the Porsche 934 RSR Tamiya kit. The transkit includes several resin parts, among which is the complete body, with its corresponding rear wing and front spoiler separately, 2 photo-etched plates, one of them for the precious honeycomb cores for the BBS rims, a sheet of high quality decals and different pieces in white metal, among which there are 4 rims with their corresponding rubber tires. What a beast!
Click here for more details
Studio27: Marking / livery 1/24 scale - Porsche 935 K1 Kremer Racing Team #3, 5, 10 - Robert 'Bob' Wollek (FR) + Hans Heyer (DE) - 6 Hours Silverstone, 6 Hours Vallelunga, 6 Hours Mugello 1976 - photo-etched parts, resin parts, rubber parts, seatbelt fabric, vacuum formed parts, water slide decals, white metal parts, other materials and assembly instructions - for Tamiya references TAM24328 and TAM24334 image

Studio27: Marking / livery 1/24 scale - Porsche 935 K1 Kremer Racing Team #3, 5, 10 - Robert 'Bob' Wollek + Hans Heyer - 6 Hours Silverstone, 6 Hours Vallelunga, 6 Hours Mugello 1976 - photo-etched parts, resin parts, rubber parts, seatbelt fabric, vacuum formed parts, water slide decals, white metal parts, other materials and assembly instructions - for Tamiya references TAM24328 and TAM24334

Studio27 Reference: ST27-TK2477

Thanks to this complete transkit, it is now possible to choose between 3 different versions of the Porsche 935 K1, the first in the hands of the Kremer team. The decal sheet allows you to choose between the version of the 6 Hours of Mugello (number #5) where it finished in second position, the version of the 6 Hours of Vallelunga (number #3), where it had to abandon, or the one of the Silverstone 6 Hours (number #10), where it repeated second position. As a starting point you will have to use the Tamiya kit of the Porsche 934 RSR. The transkit includes several resin parts, among which is the complete bodywork, with its corresponding spoiler and front apron separately, 2 photo-etched plates, one of them for the beautiful honeycomb cores for the BBS wheels, a sheet of high quality decals and different white metal pieces, among which there are 4 rim rings with their corresponding rubber tires.
Click here for more details
Studio27: Marking / livery 1/24 scale - Mercedes SLS GT3 Black Falcon Team sponsored by Driscoll's #18 - Oliver Morley (GB) + Sean Johnston (US) + Maro Rene Engel (DE) - Blancpain Endurance Series 2015 - water slide decals and placement instructions - for Fujimi references FJ125657, RS-46, FJ125695, RS-29, FJ125862 and RS-92 image

Studio27: Marking / livery 1/24 scale - Mercedes SLS GT3 Black Falcon Team sponsored by Driscoll's #18 - Oliver Morley + Sean Johnston + Maro Rene Engel - Blancpain Endurance Series 2015 - water slide decals and placement instructions - for Fujimi references FJ125657, RS-46, FJ125695, RS-29, FJ125862 and RS-92

Studio27 Reference: ST27-DC1094

Decals to make the version of the Mercedes SLS AMG GT3 of the unit with the number #18 of the Black Falcon team that participated in the 3 Hours of Monza, the first event of the 2015 season of the Blancpain Endurance Series.
Click here for more details
Studio27: Marking / livery 1/24 scale - Mercedes SLS GT3 GT Russian Team sponsored by Viatti #70 - Alexey Karachev (RU) + Bernd Schneider (DE) - Blancpain Endurance Series 2015 - water slide decals and placement instructions - for Fujimi references FJ125657, RS-46, FJ125695, RS-29, FJ125862 and RS-92 image

Studio27: Marking / livery 1/24 scale - Mercedes SLS GT3 GT Russian Team sponsored by Viatti #70 - Alexey Karachev + Bernd Schneider - Blancpain Endurance Series 2015 - water slide decals and placement instructions - for Fujimi references FJ125657, RS-46, FJ125695, RS-29, FJ125862 and RS-92

Studio27 Reference: ST27-DC1096

Decals to make the version with the number #70 of the Mercedes SLS AMG GT3 of the GT Russian team that participated in the 3 Hours of Monza, the first event of the 2015 season of the Blancpain Endurance Series, finishing in nineteenth position.
Click here for more details
Studio27: Marking / livery 1/24 scale - Mercedes SLS GT3 GT Russian Team sponsored by Pia #71 - Alexei Vasiliev (RU) + Marko Asmer (EE) - Blancpain Endurance Series 2015 - water slide decals and placement instructions - for Fujimi references FJ125657, RS-46, FJ125695, RS-29, FJ125862 and RS-92 image

Studio27: Marking / livery 1/24 scale - Mercedes SLS GT3 GT Russian Team sponsored by Pia #71 - Alexei Vasiliev + Marko Asmer - Blancpain Endurance Series 2015 - water slide decals and placement instructions - for Fujimi references FJ125657, RS-46, FJ125695, RS-29, FJ125862 and RS-92

Studio27 Reference: ST27-DC1097

Decals to make the version with number #71 of the Mercedes SLS AMG GT3 of the GT Russian team that participated in the 3 Hours of Monza, the first event of the 2015 season of the Blancpain Endurance Series, managing to finish the race in seventeenth position.
Click here for more details
Studio27: Marking / livery 1/24 scale - Mercedes SLS GT3 Black Falcon Team sponsored by Fosroc #21 - Yelmer Buurman (NL) + Hubert Haupt (DE) + Abdulaziz Al-Faisal (SA) - Blancpain Endurance Series 2015 - water slide decals and placement instructions - for Fujimi references FJ125657, RS-46, FJ125695, RS-29, FJ125862 and RS-92 image

Studio27: Marking / livery 1/24 scale - Mercedes SLS GT3 Black Falcon Team sponsored by Fosroc #21 - Yelmer Buurman + Hubert Haupt + Abdulaziz Al-Faisal - Blancpain Endurance Series 2015 - water slide decals and placement instructions - for Fujimi references FJ125657, RS-46, FJ125695, RS-29, FJ125862 and RS-92

Studio27 Reference: ST27-DC1095

Decals to make the version of the Mercedes SLS AMG GT3 of the unit with the number #21 of the Black Falcon team that participated in the 3 Hours of Monza, the first event of the 2015 season of the Blancpain Endurance Series.
Click here for more details
Studio27: Logotypes 1/12 scale - Good Year Eagle - photo-etched parts - for Beemax Model Kits references BX12001, NU-12001 and BX12001 image

Studio27: Logotypes 1/12 scale - Good Year Eagle - photo-etched parts - for Beemax Model Kits references BX12001, NU-12001 and BX12001

Studio27 Reference: ST27-FP1223

Photo-etched template to mask and paint the Good Year logos on the tires of Nunu's 1/12 scale kit of the Lotus 99T. The templates have different sizes depending on whether they are for the front or rear tires, and they have grooves to adapt the template to the lateral contour of the tire.
Click here for more details
Model Factory Hiro: Detail - Hood pins for cables - turned metal parts - 50 units image

Model Factory Hiro: Detail - Hood pins for cables - turned metal parts - 50 units

Model Factory Hiro Reference: MFH-P942

50 units of hood pins for cables, switches, or any other element. They can be used as cable glands for any type of panel, since each of the pieces is hollow from end to end.
Click here for more details
Studio27: Detail up set 1/20 scale - McLaren Honda MP4/5B McLaren Racing Limited Team - photo-etched parts and assembly instructions - for Tamiya references TAM20026, TAM89720 and TAM92209 image

Studio27: Detail up set 1/20 scale - McLaren Honda MP4/5B McLaren Racing Limited Team - photo-etched parts and assembly instructions - for Tamiya references TAM20026, TAM89720 and TAM92209

Studio27 Reference: ST27-FP20166

New limited-time re-edition of the Studio27 photo-etched parts designed for the Tamiya kit of the McLaren Honda MP4/5B in 1/20 scale. The radiator panels or the planes of the spoilers, among other elements, will gain in detail, with a thickness more in line with reality. Don't miss out on them!!
Click here for more details
Studio27: Detail up set 1/24 scale - Fiat 500F - photo-etched parts and assembly instructions - for Tamiya references TAM24169, TAM89655 and 24169 image

Studio27: Detail up set 1/24 scale - Fiat 500F - photo-etched parts and assembly instructions - for Tamiya references TAM24169, TAM89655 and 24169

Studio27 Reference: ST27-FP24239

Re-edition of the photo-etched plate to use with the different references of the Tamiya kit of the Fiat 500F. Don't hesitate for a second to use these photo-etched plates to improve the detailing and give your model a very real look. Among many other details, it includes window frames, windshield wipers, various grilles, door panel handles... and much more. Essential!
Click here for more details