Newsletter 596: Last lap

Last lap

Last lap
We are in the last lap of this year 2023, there are barely a few days left until it ends. And like the best drivers, we are already looking ahead to the next race, 2024.

Like those pilots, we think over the race we are finishing, the right and the wrong decisions made (in our case, scale-modeling wise) and we learn to face the next challenge with more experience, with more wisdom and with more desire. :)

It is time to think "from the pits" about what our strategy is going to be: what are we going to build in the coming months, what contests do we want to win or simply enjoy, or what new experimental technique are we going to use to be the King of the "Likes"... XD

Of course, in the lap of honour we want to thank all the scale modellers in the world for your patience with the manufacturers' delays, for your generosity in placing huge orders at SpotModel, for your understanding in the event of any possible issue, for your flattering comments and positive ratings... but above all for just being there, because SpotModel would be nothing without all of you. :)

What will we get in 2024? Well, for sure a veeeeeeery interesting year, full of really juicy news that we have all been waiting. Are you in?

The whole SpotModel staff wishes you a fantastic year 2024 plenty of good times.

Decalcas: Marking / livery 1/24 scale - Peugeot 205 Turbo 16 Peugeot Sport Team sponsored by Shell #6 - Timo Salonen (FI) + Seppo Harjanne (FI) - Portugal Rally - Vinho do Porto 1985 - water slide decals manufactured with digital technology and assembly instructions - for Tamiya reference TAM24054 image

Decalcas: Marking / livery 1/24 scale - Peugeot 205 Turbo 16 Peugeot Sport Team sponsored by Shell #6 - Timo Salonen + Seppo Harjanne - Portugal Rally - Vinho do Porto 1985 - water slide decals manufactured with digital technology and assembly instructions - for Tamiya reference TAM24054

Decalcas Reference: DCL-DEC054

In 1985 the world rally champion was Finnish, and he drove a Peugeot, but to the surprise of many it was not the one everyone expected, but Timo Salonen, who began the season as the teammate of the very fast Vatanen and ended up establishing himself as a driver. In the Portuguese rally he achieved his first victory of the year, and to be able to make this version Decalcas has designed this complete decal sheet, with all the necessary logos and numbers. The decoration of a champion!
Click here for more details
USCP: Detail up set 1/24 scale - Lancia Delta Integrale Late - 3D printed parts, photo-etched parts, resin parts and water slide decals - for Hasegawa references 20433, 25013, CR-13, 20457, 20507, 20548, 20601, 20648, 20685, 25015, CR-15, HACR15, 25015 and CR-15 image

USCP: Detail up set 1/24 scale - Lancia Delta Integrale Late - 3D printed parts, photo-etched parts, resin parts and water slide decals - for Hasegawa references 20433, 25013, CR-13, 20457, 20507, 20548, 20601, 20648, 20685, 25015, CR-15, HACR15, 25015 and CR-15

USCP Reference: 24A074

The front grille of the Lancia Delta Integrale underwent several changes, with a different configuration in the headlight area depending on the year of manufacture. Not only does the size and type of optics change, but even the surface available for the grille around the headlights is modified. The latest series, to which this reference corresponds, had optics of similar size and a double grille both at the top and at the bottom of the headlights. The set is complemented by an interesting photo-etched plate and a sheet of decals that allow you to complete not only the front grille, but also those of the rest of the car with the corresponding emblems of different versions.
Click here for more details
Decalcas: Logotypes 1/12 scale - Goodyear tyre marking set 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988 and 1989 - water slide decals image

Decalcas: Logotypes 1/12 scale - Goodyear tyre marking set 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988 and 1989 - water slide decals

Decalcas Reference: DCL-LOG003

Decal set of Good Year Eagle logos for decorating your 1980s Formula 1 tyres: McLaren MP4/4, Ferrari 641, etc...
Click here for more details
Decalcas: Logotypes 1/24 scale - Fire extinguisher and battery cut off symbols - water slide decals image

Decalcas: Logotypes 1/24 scale - Fire extinguisher and battery cut off symbols - water slide decals

Decalcas Reference: DCL-LOG004

Extensive sheet of decals with assorted battery cut-off and fire extinguisher logos in 1/24 scale, valid for all race cars.
Click here for more details
Decalcas: Logotypes 1/20 scale - Good Year Eagle tyre marking set - water slide decals image

Decalcas: Logotypes 1/20 scale - Good Year Eagle tyre marking set - water slide decals

Decalcas Reference: DCL-LOG007

Decals for Good Year tires in 1/20 scale, only for the most demanding modelers. The look once placed on your tires is absolutely fantastic. The height of the letters is 2.4 mm.
Click here for more details
Decalcas: Marking / livery 1/24 scale - Lancia LC2 Euro TV Mirabella Racing Team sponsored by Elicent Euro Bono #6 - Giorgio Francia (IT) + Paolo Barilla (IT) - SPA Francorchamps 1000 Kms 1983 - water slide decals and assembly instructions - for Italeri references 3641 and IT3641 image

Decalcas: Marking / livery 1/24 scale - Lancia LC2 Euro TV Mirabella Racing Team sponsored by Elicent Euro Bono #6 - Giorgio Francia + Paolo Barilla - SPA Francorchamps 1000 Kms 1983 - water slide decals and assembly instructions - for Italeri references 3641 and IT3641

Decalcas Reference: DCL-DEC069

Decals to make the decoration of the Lancia LC2 that raced in the SPA Francorchamps 1000 Kms of the World Endurance Championship in 1983, where it finished in sixth position ahead of the works LC2 Martini's.
Click here for more details

Ixo Collections: Car scale model kit 1/8 scale - Porsche 917 KH sponsored by Gulf #20 - Steve McQueen - 24 Hours Le Mans 1970 - metal parts, plastic parts, rubber parts, other materials and assembly instructions

Ixo Collections Reference: IXC.POR.FK

Would you like to build a faithful replica of the iconic Porsche 917 driven by Steve McQueen in the cult film "Le Mans"? And what would you think if once assembled it had a length of 55 cm and a weight of almost 6 kilos? Well, you can do this with this kit from Ixo Collections, with no less than 839 pieces, of which 156 are metal, all of them pre-painted and ready to be assembled. And if this is not enough, the kit allows elements such as the lights to be functional, mounting the electrical installation almost as in the real car, and also has sound functions for both the engine and the horn. Can you ask for more?
Click here for more details
Ixo Collections: Car scale model kit 1/8 scale - Bugatti Atlantic 57SC Rothschild - metal parts, plastic parts, rubber parts, other materials and assembly instructions image

Ixo Collections: Car scale model kit 1/8 scale - Bugatti Atlantic 57SC Rothschild - metal parts, plastic parts, rubber parts, other materials and assembly instructions

Ixo Collections Reference: IXC.BUG.FK

The 1930s can be considered the golden age of glamor and sophistication in the automotive world, with vehicles as elegant and extraordinary as the Bugatti Atlantic 57SC Rothschild. Thanks to Ixo Collections, you can now assemble your own replica of this icon of automotive history, with a kit where each element, each color tone and each line is reproduced with absolute precision, having even been validated by the Bugatti Family. The kit contents up of 515 plastic and metal parts, all of them pre-painted and ready to be assembled. Once assembly is complete, the doors open elegantly to reveal its sumptuous interior, the engine hood lifts to reveal its impressive engine, and the boot lid opens to reveal the spare wheel. And if all this were not enough, it has a remote control from which you can control the engine sound and the activation of the front and rear lights. An exceptional reproduction with extreme attention to detail.
Click here for more details
Ixo Collections: Car scale model kit 1/8 scale - Mercedes W196R #8 - Juan Manuel Fangio (AR) - Formula 1 World Championship 1955 - metal parts, plastic parts, rubber parts, other materials and assembly instructions image

Ixo Collections: Car scale model kit 1/8 scale - Mercedes W196R #8 - Juan Manuel Fangio - Formula 1 World Championship 1955 - metal parts, plastic parts, rubber parts, other materials and assembly instructions

Ixo Collections Reference: IXC.MRF.F.KIT

Nothing less than the car with which the great Juan Manuel Fangio won his third Formula 1 world title, achieving 4 victories in 7 Grand Prix. Now it is possible to assemble this historic champion in great detail, with a kit that contains no less than 451 parts, of which 114 are metal, all of them pre-painted and ready to be assembled. Once built, the front hood can be raised, revealing its impressive direct injection inline 8-cylinder engine, an engineering prodigy for its time. In addition, the kit has a remote control with which to play the sound of the engine. They are limited units, so don't miss out!
Click here for more details
Decalcas: Decals 1/24 scale - BMW M1 BBS rims and tyres - water slide decals manufactured with digital technology - for Decalcas reference DCL-PAR111 image

Decalcas: Decals 1/24 scale - BMW M1 BBS rims and tyres - water slide decals manufactured with digital technology - for Decalcas reference DCL-PAR111

Decalcas Reference: DCL-DEC956

Don't worry. If your idea is to get a unit of the fantastic wheel set from Decalcas for the BMW M1, they already come with the decals and masks included... but who knows, maybe a problem has arisen and you need a replacement, or you see them useful for some other project. For this reason, Decalcas has decided to give the option of separately purchasing the decal sheet with the Goodyear logos for the tires, the BBS logos for the rims, and the decorative ones for the turbofans.
Click here for more details
Tamiya: Catalogue - Tamiya catalog 2024 image

Tamiya: Catalogue - Tamiya catalog 2024

Tamiya Reference: TAM64451

It's here. A true end-of-year classic, the new Tamiya catalog for 2024, with all its latest news not only from the civilian section but also from the rest of the modalities, including its tools and paints. Full color photos on high quality paper. Edited in English, German, French and Spanish.
Click here for more details
Decalcas: Marking / livery 1/12 scale - Porsche 934 RSR Vasek Polak Team sponsored by First National City Travellers Checks #16 - George Follmer (US) - SCCA Trans-American Championship 1976 - water slide decals and assembly instructions - for Tamiya references TAM12020, BS1220, TAM12040, TAM12055 and TAM12056 image

Decalcas: Marking / livery 1/12 scale - Porsche 934 RSR Vasek Polak Team sponsored by First National City Travellers Checks #16 - George Follmer - SCCA Trans-American Championship 1976 - water slide decals and assembly instructions - for Tamiya references TAM12020, BS1220, TAM12040, TAM12055 and TAM12056

Decalcas Reference: DCL-DEC065

Decals for the decoration of the Porsche 934 RSR used in the last championship race of the SCCA Trans-American Championship held in 1976 at the Canadian circuit of Trois-Rivieres, where George Follmer with the number #16 not only won the race, but also was crowned the winner of the championship. We especially love the work and definition of the decoration travellers cheques. Great job! This reference can be used with Tamiya 1/12 kits.
Click here for more details
Studio27: Detail up set 1/20 scale - Tyrrell Honda 020 - photo-etched parts and assembly instructions - for Tamiya reference TAM20029 image

Studio27: Detail up set 1/20 scale - Tyrrell Honda 020 - photo-etched parts and assembly instructions - for Tamiya reference TAM20029

Studio27 Reference: ST27-FP20161

Tamiya has always been a reference in the world of modeling for its kits, just as Studio27 is with its photo-etched plates. The combination of both is therefore ideal, and to help detail your Tamiya Tyrrell Honda 020, this great photo-etched plate has everything necessary to improve many of the most visible elements, such as the side panels of the rear and front wings, the latter with its characteristic curved interior panels, as well as the radiator grilles with their frames, among many other details.
Click here for more details
Studio27: Detail up set 1/20 scale - McLaren Honda MP4/7 - photo-etched parts and assembly instructions - for Tamiya references TAM20035 and TAM25171 image

Studio27: Detail up set 1/20 scale - McLaren Honda MP4/7 - photo-etched parts and assembly instructions - for Tamiya references TAM20035 and TAM25171

Studio27 Reference: ST27-FP20162

Studio27 reissues its photo-etched plate to detail the Tamiya references of the McLaren Honda MP4/7 at 1/20 scale, with elements as interesting as the lateral planes of the rear wing, the covers of the air inlets of the sidepods, the different radiators, and even the engine exhaust manifold gaskets. Are you also wanting to get one?
Click here for more details
Studio27: Detail up set 1/20 scale - McLaren Honda MP4/8 - photo-etched parts and assembly instructions - for Tamiya references TAM20039 and TAM25172 image

Studio27: Detail up set 1/20 scale - McLaren Honda MP4/8 - photo-etched parts and assembly instructions - for Tamiya references TAM20039 and TAM25172

Studio27 Reference: ST27-FP20163

Studio27 reissues its photo-etched plate to detail the Tamiya references of the McLaren Honda MP4/8 at 1/20 scale, with elements as interesting as different configurations for the side planes for the rear spoiler, the air inlet covers of the sidepods, the brake disc cores, the radiators, and even the suspension system anchors.
Click here for more details
Studio27: Detail up set 1/20 scale - Tyrrell Ford P34 1977 - photo-etched parts and assembly instructions - for Tamiya reference TAM20053 image

Studio27: Detail up set 1/20 scale - Tyrrell Ford P34 1977 - photo-etched parts and assembly instructions - for Tamiya reference TAM20053

Studio27 Reference: ST27-FP20164

Limited time re-edition of these photo-etched parts designed for the 1977 version of the Tyrrell Ford P34 from Tamiya in 1/20 scale. The photo-etched plate includes such interesting elements as the radiators, two different configurations of the rear wing planes, the chassis structure under the cockpit dome, the brake discs, and many more details to give a high degree of realism to your model. Do not stay without them!!
Click here for more details
Studio27: Detail up set 1/24 scale - Ford GT40 - photo-etched parts and assembly instructions - for Fujimi references FJ12101, HR-1, FJ12125, FJ12129, HR-10, FJ12130, FJ12131, FJ12132, FJ12134, FJ12135, FJ12138, FJ12139, FJ12143, FJ12147, FJ12148, FJ12158, FJ12159, FJ12160, FJ12161, FJ12166, FJ12170, FJ12172, FJ12306, FJ123066, FJ126036, RS-16, FJ126043, RS-32, FJ12605, FJ126050, RS-97, FJ126067 and RS-51, or Revell reference REV07696 image

Studio27: Detail up set 1/24 scale - Ford GT40 - photo-etched parts and assembly instructions - for Fujimi references FJ12101, HR-1, FJ12125, FJ12129, HR-10, FJ12130, FJ12131, FJ12132, FJ12134, FJ12135, FJ12138, FJ12139, FJ12143, FJ12147, FJ12148, FJ12158, FJ12159, FJ12160, FJ12161, FJ12166, FJ12170, FJ12172, FJ12306, FJ123066, FJ126036, RS-16, FJ126043, RS-32, FJ12605, FJ126050, RS-97, FJ126067 and RS-51, or Revell reference REV07696

Studio27 Reference: ST27-FP24237

Re-edition of the photo-etched plate to use with the different references of the Fujimi and Revell kits of the incredible Ford GT40. Don't hesitate for a second to use this photo-etched part that includes just the right and minimal pieces to give your model a very real look. Among many other details, it includes the hood closures, the intake grille, the rear engine ventilation grille, the harnesses, etc. Essential!
Click here for more details
Studio27: Detail up set 1/24 scale - Ferrari F40 Competizione - photo-etched parts and assembly instructions - for Tamiya reference TAM24284 image

Studio27: Detail up set 1/24 scale - Ferrari F40 Competizione - photo-etched parts and assembly instructions - for Tamiya reference TAM24284

Studio27 Reference: ST27-FP24238

Photo-etched sheet with some essential components to improve the detailing of the Tamiya kit of the competition version of the Ferrari F40 sponsored by Shell. Grilles, radiators, sliding window frames, skirts, the characteristic gearshift guide grille, pedals, are just some of the many details that are included. Are you going to miss them?
Click here for more details
Top Studio: Detail up set 1/12 scale - Suzuki GSX-RR - photo-etched parts, resin parts, turned metal parts, other materials and assembly instructions - for Tamiya reference TAM14139 image

Top Studio: Detail up set 1/12 scale - Suzuki GSX-RR - photo-etched parts, resin parts, turned metal parts, other materials and assembly instructions - for Tamiya reference TAM14139

Top Studio Reference: TD23284

Detail-up set, including resin parts, photo-etched parts, and small turned metal parts, so you can improve the appearance of the Tamiya Suzuki GSX-RR scale kit.
Click here for more details
Top Studio: Clutch 1/12 scale - Suzuki GSX-RR 2020 - photo-etched parts, resin parts and assembly instructions - for Tamiya reference TAM14139 image

Top Studio: Clutch 1/12 scale - Suzuki GSX-RR 2020 - photo-etched parts, resin parts and assembly instructions - for Tamiya reference TAM14139

Top Studio Reference: TD23283

Spectacular and detailed clutch set, composed of resin and photo-etched parts, to replace the much simpler plastic part of the kit. What a change!
Click here for more details
Top Studio: Footpeg 1/12 scale - Suzuki GSX-RR - resin parts - for Tamiya reference TAM14139 image

Top Studio: Footpeg 1/12 scale - Suzuki GSX-RR - resin parts - for Tamiya reference TAM14139

Top Studio Reference: TD23285

Resin parts made in great detail to replace the different footpegs of the Suzuki GSX-RR Tamiya kit.
Click here for more details
Top Studio: Seat 1/12 scale - Suzuki GSX-RR - resin parts - for Tamiya reference TAM14139 image

Top Studio: Seat 1/12 scale - Suzuki GSX-RR - resin parts - for Tamiya reference TAM14139

Top Studio Reference: TD23286

Resin seat to replace the plastic part of the Tamiya kit.
Click here for more details
Ixo Collections: Car scale model kit 1/8 scale - Volvo 122S - metal parts, plastic parts, rubber parts, other materials and assembly instructions image

Ixo Collections: Car scale model kit 1/8 scale - Volvo 122S - metal parts, plastic parts, rubber parts, other materials and assembly instructions

Ixo Collections Reference: IXC.VOL.FK

Without a doubt, Volvo engineer Nils Bohlin deserves to be remembered for his invention, the 3-point seat belt, an item that continues to save thousands of lives every day. And although it began to be assembled as an accessory, with the launch of the 120 series Volvo decided to include it as standard, making it the safest car in the world. And now, thanks to Ixo Collections, you can build your own replica of the elegant two-door version, the Volvo 122S. The kit contains 892 plastic and metal parts, all of them pre-painted and ready to be assembled. Once the assembly is completed, the doors open revealing its elegant interior, the engine hood lifts revealing its engine, and the trunk lid opens. And if all this were not enough, you can control the engine sound and the activation of the front and rear lights. An exceptional reproduction with extreme attention to detail.
Click here for more details
Model Factory Hiro: Car scale model kit 1/12 scale - Chevrolet Corvette C1 1960 - photo-etched parts, resin parts, rubber parts, turned metal parts, water slide decals, white metal parts, other materials, assembly instructions and painting instructions image

Model Factory Hiro: Car scale model kit 1/12 scale - Chevrolet Corvette C1 1960 - photo-etched parts, resin parts, rubber parts, turned metal parts, water slide decals, white metal parts, other materials, assembly instructions and painting instructions

Model Factory Hiro Reference: MFH-K829

We are still learning details of this kit of an icon of the American automobile industry, but as a preview, it can be completed in any of its three variants, whether convertible, with a hardtop or with a soft top roof. Among the varied amount of materials included is the carpet inside the cabin, which will come in three colors to be able to reproduce any of the interiors available for the 1960 C1 versions. The tires have the white band pre-painted on the rubber itself, achieving a hyperrealistic finish. I can't wait for it to arrive!
Click here for more details
Model Factory Hiro: Car scale model kit 1/24 scale - Abarth Record Monza Roosevelt Auto Team #62, 63, 64 - Lanzo Cussini (IT) + Remo Cattini (IT), Mario Poltronieri (IT) + Alfonso Thiele (IT), Bill Rutan (US) + Ray Cuomo (US) + Paul Richards (US) - 12 Hours Sebring 1959 - metal parts, photo-etched parts, resin parts, rubber parts, vacuum formed parts, water slide decals, white metal parts, other materials and assembly instructions image

Model Factory Hiro: Car scale model kit 1/24 scale - Abarth Record Monza Roosevelt Auto Team #62, 63, 64 - Lanzo Cussini + Remo Cattini, Mario Poltronieri + Alfonso Thiele, Bill Rutan + Ray Cuomo + Paul Richards - 12 Hours Sebring 1959 - metal parts, photo-etched parts, resin parts, rubber parts, vacuum formed parts, water slide decals, white metal parts, other materials and assembly instructions

Model Factory Hiro Reference: MFH-LK001

This kit from the MFH "Lightweight" series allows you to choose between the three units of the Abarth Record Monza that participated in the 1959 12 Hours of Sebring, each one in a different color. The number #62 with the red body finished in 29th place, the number #63 with the Aqua body finished in 32nd place, and the number #64 with the white body finished in the 28th position. For which do you decide?
Click here for more details
USCP: Transkit 1/24 scale - Volvo 240 - Street version - 3D printed parts, resin parts, water slide decals and assembly instructions - for Beemax Model Kits references B24012, 98257 and BX24027, or Nunu references PN24013 and NU24013 image

USCP: Transkit 1/24 scale - Volvo 240 - Street version - 3D printed parts, resin parts, water slide decals and assembly instructions - for Beemax Model Kits references B24012, 98257 and BX24027, or Nunu references PN24013 and NU24013

USCP Reference: 24T041

Pieces to completely transform the interior of the Nunu or Beemax Volvo 240 kit, converting it into the street version. Combining resin and 3D printed parts, it includes everything necessary, with parts defined in detail, such as the door panels or the complete dashboard. The instrument panel decals include 4 options, with clock or rev counter, and with odometer in miles or kilometres per hour.
Click here for more details
USCP: Rims and tyres set 1/24 scale - Ferrari 250 Testa Rossa Wire rims and tires 16 inches - 3D printed parts and rubber parts - for Hasegawa references HA20242, HA20246, HAHC19, 21219 and HC-19 - 4 units image

USCP: Rims and tyres set 1/24 scale - Ferrari 250 Testa Rossa Wire rims and tires 16 inches - 3D printed parts and rubber parts - for Hasegawa references HA20242, HA20246, HAHC19, 21219 and HC-19 - 4 units

USCP Reference: 24P175

3D printed resin rims in 1/24 scale. The set includes 4 Pirelli Stelvio rubber tires, and is designed to fit the Hasegawa Ferrari 250 Testa Rossa kit. The center wheel nuts have been redesigned to closely reflect the design used on the Testa Rossa, and are included both air valves as adapters to be able to mount the wheels on models from other manufacturers. The diameter of the wheels with the tires mounted is approximately 27,3 mm, with a width of approximately 8,3 mm.
Click here for more details
USCP: Detail 1/24 scale - Volvo 240 - Rear window louvers - 3D printed parts - for Beemax Model Kits references B24012, 98257 and BX24027, or Nunu references PN24013 and NU24013 image

USCP: Detail 1/24 scale - Volvo 240 - Rear window louvers - 3D printed parts - for Beemax Model Kits references B24012, 98257 and BX24027, or Nunu references PN24013 and NU24013

USCP Reference: 24A076

In the 80s, an accessory that was mounted on the rear window became fashionable, with a series of planes that were intended to improve aerodynamics, but without compromising the driver's rearward visibility. If you are a fan of the 80s, you are going to transform your Volvo 240 kit to the street model, or you remember the Volvo 240 of your dreams with this element mounted, what better than to get this reference that fits like a glove on the rear glass of the Nunu / Beemax kit?
Click here for more details
USCP: Detail up set 1/24 scale - Volvo 240 - Front grill - 3D printed parts and resin parts - for Beemax Model Kits references B24012, 98257 and BX24027, or Nunu references PN24013 and NU24013 image

USCP: Detail up set 1/24 scale - Volvo 240 - Front grill - 3D printed parts and resin parts - for Beemax Model Kits references B24012, 98257 and BX24027, or Nunu references PN24013 and NU24013

USCP Reference: 24A075

Front grille printed with 3D technology that reproduces the front grille mounted on the Volvo 240 in its first years of production, with round headlights instead of rectangular, a thinner grille pattern and more rounded turn signals without a chrome profile.
Click here for more details

Model Factory Hiro: Motorbike scale model kit 1/9 scale - Brough Superior SS100 - metal parts, photo-etched parts, resin parts, rubber parts, water slide decals, white metal parts and assembly instructions

Model Factory Hiro Reference: MFH-K485

Do you like bikes? Are you a highly skilled modeler, or want to earn your stripes? In that case, do not miss this exclusive scale model kit of one of the most beautiful and interesting bikes from the last century.
Click here for more details

Model Factory Hiro: Motorbike scale model kit 1/9 scale - Montgomery British Anzani 8/38hp 1920 - metal parts, photo-etched parts, rubber parts, turned metal parts, water slide decals, white metal parts, other materials and assembly instructions

Model Factory Hiro Reference: MFH-K540

Back to 1920 when the Montgomery British Anzani 8/38hp was born, a gorgeous motorcycle beautifully reproduced in 1/9 scale by Model Factory Hiro. The kit includes hundreds of white metal, rubber, photo-etched and chromed parts.
Click here for more details
Model Factory Hiro: Motorbike scale model kit 1/9 scale - Vincent Black Shadow 1948 - photo-etched parts, resin parts, rubber parts, turned metal parts, water slide decals, white metal parts, other materials and assembly instructions image

Model Factory Hiro: Motorbike scale model kit 1/9 scale - Vincent Black Shadow 1948 - photo-etched parts, resin parts, rubber parts, turned metal parts, water slide decals, white metal parts, other materials and assembly instructions

Model Factory Hiro Reference: MFH-K567

If you are an advanced modeler and you really like motorcycle scale models, do not miss building this fantastic Model Factory Hiro scale model. Resin parts, white metal parts, nuts and bolts, wires, rubber parts, and an endless number of little treasures to build one of the most beautiful motorcycles of the 40s.
Click here for more details

Model Factory Hiro: Motorbike scale model kit 1/9 scale - Harley Davidson Knucklehead 1940 - photo-etched parts, resin parts, rubber parts, turned metal parts, water slide decals, white metal parts, other materials and assembly instructions

Model Factory Hiro Reference: MFH-K637

If you are an advanced modeler and you really like motorcycle scale models, do not miss building this fantastic Model Factory Hiro scale model. Resin parts, white metal parts, nuts and bolts, wires, rubber parts, and an endless number of little treasures to build one of the most beautiful motorcycles of the 40s.
Click here for more details
Model Factory Hiro: Motorbike scale model kit 1/9 scale - Harley Davidson Knucklehead 1947 - photo-etched parts, resin parts, rubber parts, turned metal parts, water slide decals, white metal parts, other materials and assembly instructions image

Model Factory Hiro: Motorbike scale model kit 1/9 scale - Harley Davidson Knucklehead 1947 - photo-etched parts, resin parts, rubber parts, turned metal parts, water slide decals, white metal parts, other materials and assembly instructions

Model Factory Hiro Reference: MFH-K638

If you are an advanced modeler and you really like motorcycle scale models, do not miss building this fantastic Model Factory Hiro scale model. Resin parts, white metal parts, nuts and bolts, wires, rubber parts, and an endless number of little treasures to build one of the most beautiful motorcycles of the 40s.
Click here for more details
Model Factory Hiro: Motorbike scale model kit 1/9 scale - Harley Davidson Panhead 1948 - metal parts, photo-etched parts, resin parts, rubber parts, water slide decals, white metal parts, other materials, assembly instructions and painting instructions image

Model Factory Hiro: Motorbike scale model kit 1/9 scale - Harley Davidson Panhead 1948 - metal parts, photo-etched parts, resin parts, rubber parts, water slide decals, white metal parts, other materials, assembly instructions and painting instructions

Model Factory Hiro Reference: MFH-K712

Do you like bikes? Are you a highly skilled modeler, or want to earn your stripes? In that case, do not miss this exclusive scale model kit of one of the most beautiful and interesting bikes from the last century.
Click here for more details