Newsletter 586: Bring it on!October 11, 2023

Bring it on!

Bring it on!
At the end of summer, all manufacturers have gone completely crazy and don't stop sending us their new and delicious products that we gladly place with care and all our love on the shelves of our ample warehouse. :)

Among the products that have arrived these days you have a giant shipment of limited edition models from Hasegawa that will be available for a short time, the new references from Yamamoto Model Parts, the Decalcas decoration for Magnus Walker's Porsche 911, or the new version of Revell's Land Rover.

And if that's not enough, for the most daring modelers we also have several scale models and some Studio27 transkits that we serve on demand, as well as several new shades by Zero Paints.

Now, although we treat our products with great care, from time to time we receive a shipment that has been punished by the logistic companies and when opened it brings products with some aesthetic damage on the outside, although their content is perfect. As you well know (and if not, we remind you :-), we offer these products at a reduced price in our Outlet, where you can find material with a very interesting price, did you know that?

All this and much more at SpotModel, possibly your favorite scale modeling store. :)

Hasegawa: Car scale model kit 1/24 scale - Mini Cooper 1.3i 1997 - paint masks, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Hasegawa Reference: 21154

Nearly 40 years after its launch in 1959, the Mini was still in production with virtually no major changes. In 1997 the last series of the Mini appeared, and it is precisely this last generation that is reproduced in this kit, full of details in the interior and in the chassis and running axles section. The decal sheet includes some realistic wood patterns to recreate the luxurious dashboard, although the sprues also have the classic dashboard with the clocks located in the center. Engine is partially recreated in its entirety, although the body hood is missing. separate. A classic rejuvenated!
Click here for more details
Hasegawa: Car scale model kit 1/24 scale - Toyota 91C-V Tom's Team sponsored by Minolta #36 - Masanori Sekiya (JP) + Hitoshi Ogawa (JP) + Andy Wallace (GB) - All Japan Sport Prototype Championship (JSPC) 1991 - paint masks, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions image

Hasegawa: Car scale model kit 1/24 scale - Toyota 91C-V Tom's Team sponsored by Minolta #36 - Masanori Sekiya + Hitoshi Ogawa + Andy Wallace - All Japan Sport Prototype Championship (JSPC) 1991 - paint masks, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Hasegawa Reference: 21156

Kit to make the winning unit of the Fuji 500 Miles, third round of the Japanese Sport Prototype Championship (JSPC) in 1991. A completely new kit, with very interesting details, such as the rims with a separate core to facilitate color painting in white. Although the rear hood cannot be opened, the mechanical parts visible through any of the openings in the bodywork have been detailed, with a gearbox, a set of suspensions, radiators and turbos at the very rear well-defined, which complement its exquisite interior and the front of the monocoque chassis. Quite a delight!
Click here for more details

Hasegawa: Car scale model kit 1/24 scale - Jaguar XJR-8 Silk Cut Jaguar Team #6 - Martin Brundle + John Nielsen - FIA World Sports-Prototype Championship (WSPC) 1987 - plastic parts, resin parts, rubber parts, water slide decals, assembly instructions and painting instructions

Hasegawa Reference: 20615

The version of the Jaguar XJR-8 that participated in the fourth round of the World Sport Prototype Championship held at Silverstone. Compared to previous versions of the kit, in addition to a new decal sheet, new resin parts are included for the extension located in the center of the front hood, and also for the reproduction of the air outlets above the wings of the front wheels.
Click here for more details
Hasegawa: Car scale model kit 1/24 scale - Subaru Impreza WRC 2005 Atolye Kazaz Team sponsored by Red Devil #27 - Kristian Sohlberg (FI) + Tomi Tuominen (FI) - Rally de Italia Sardegna 2006 - paint masks, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions image

Hasegawa: Car scale model kit 1/24 scale - Subaru Impreza WRC 2005 Atolye Kazaz Team sponsored by Red Devil #27 - Kristian Sohlberg + Tomi Tuominen - Rally de Italia Sardegna 2006 - paint masks, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Hasegawa Reference: 20614

It looks like it, but it isn't. Driver Kristian Sohlberg has nothing to do with the Solberg brothers, but that didn't stop his superb performance at the 2006 Sardinia Rally, where he finished sixth, even ahead of the factory Subarus. A beautiful decoration with the colors of the Red Devil energy drinks, which undoubtedly gave it a strong boost.
Click here for more details
Hasegawa: Car scale model kit 1/24 scale - Mitsubishi Lancer (Carisma GT) Evolution IV RalliArt Team #2 - Richard Burns (GB) + Robert Reid (GB) - Acropolis Rally 1997 - photo-etched parts, plastic parts, rubber parts, seatbelt fabric, water slide decals, assembly instructions and painting instructions image

Hasegawa: Car scale model kit 1/24 scale - Mitsubishi Lancer (Carisma GT) Evolution IV RalliArt Team #2 - Richard Burns + Robert Reid - Acropolis Rally 1997 - photo-etched parts, plastic parts, rubber parts, seatbelt fabric, water slide decals, assembly instructions and painting instructions

Hasegawa Reference: 20593

Limited edition of the Mitsubishi Lancer Evo IV Group A kit, this time with the decoration used by the second unit of the official team during its participation in the 1997 Acropolis Rally. As usual in recent seasons due to the two names with which Mitsubishi marketed the model, the second car was registered under the name of Carisma, which is why it appears as advertising on the sides of the car. Regarding other references of the same Hasegawa model, the only change is the new sheet of decals.
Click here for more details
Hasegawa: Car scale model kit 1/24 scale - Lancia Super Delta HF Integrale Mauro Nocentini MRT Team sponsored by Charro #18 - Jesús Puras (ES) + Alex Romaní (ES) - Catalunya Costa Brava Rally - Rally of Spain 1992 - photo-etched parts, plastic parts, rubber parts, seatbelt fabric, water slide decals, assembly instructions and painting instructions image

Hasegawa: Car scale model kit 1/24 scale - Lancia Super Delta HF Integrale Mauro Nocentini MRT Team sponsored by Charro #18 - Jesús Puras + Alex Romaní - Catalunya Costa Brava Rally - Rally of Spain 1992 - photo-etched parts, plastic parts, rubber parts, seatbelt fabric, water slide decals, assembly instructions and painting instructions

Hasegawa Reference: 20601

Limited edition of the Lancia Delta HF Integrale 16V Evo kit, this time with the decoration used by Jesús Puras during his participation in the Rally Catalunya Costa Brava in 1992, in which he finished in sixth position. Regarding other references of the same Hasegawa kit, the only change is the new decal sheet.
Click here for more details

Hasegawa: Car scale model kit 1/24 scale - Toyota Corolla WRC sponsored by Alice #46 - Valentino Rossi + Carlo Cassina - Monza Rally Show 2004 - paint masks, photo-etched parts, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Hasegawa Reference: 20619

Valentino Rossi's participation with 4-wheel vehicles goes back a long way, with increasingly powerful vehicles, but the Rally Show held in Monza in 2004 was also his first relevant result, achieving the third step of the podium. This version of the Toyota Corolla WRC is the new reference chosen by Hasegawa, with a complete new decal sheet.
Click here for more details
Hasegawa: Car scale model kit 1/24 scale - Mitsubishi Lancer Evo VI Group N Ralliart Italia Team sponsored by Ancap #26 - Gustavo Trelles (UY) + Martin Christie (AR) - Tour de Corse Rallye de France 1999 - paint masks, photo-etched parts, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions image

Hasegawa: Car scale model kit 1/24 scale - Mitsubishi Lancer Evo VI Group N Ralliart Italia Team sponsored by Ancap #26 - Gustavo Trelles + Martin Christie - Tour de Corse Rallye de France 1999 - paint masks, photo-etched parts, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Hasegawa Reference: 20608

Gustavo Trelles was proclaimed Group N World Rally Champion for no less than four consecutive years, the last of which was precisely in 1999, the year to which this version of the Lancer Evo VI model corresponds. The kit includes a photo-etched plate for details such as the pedals, the windshield wipers, the bonnet latches or the harness buckles, as well as a mask template for painting the windows.
Click here for more details

Hasegawa: Car scale model kit 1/24 scale - Lancia Stratos HF Group IV Lancia Great Britain Team sponsored by Nashua #2 - Markku Alén + Ilkka Kivimäki - Lombard RAC Rally 1979 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Hasegawa Reference: 20598

New version of a Hasegawa classic, such as his kit of the Lancia Stratos, recreating on this occasion the unit with which Marku Alen achieved fifth place in the 1979 Lombard RAC Rally. Regarding other references of the same model and manufacturer, the model differs only in the decal sheet.
Click here for more details
Hasegawa: Car scale model kit 1/24 scale - Porsche 962C Porsche AG Team sponsored by Dunlop #17 - Hans-Joachim Stuck (DE) - Supercup Nürburgring , ADAC Würth Supercup 1987 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Hasegawa: Car scale model kit 1/24 scale - Porsche 962C Porsche AG Team sponsored by Dunlop #17 - Hans-Joachim Stuck - Supercup Nürburgring , ADAC Würth Supercup 1987 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Hasegawa Reference: 20603

Scale kit of the Porsche 962C winner of the first race held at the Nürburgring of the ADAC Würth Supercup, where Porsche continued to develop its dual-clutch gearbox concept, called PDK, a name that is still used today.
Click here for more details
Hasegawa: Car scale model kit 1/24 scale - Toyota Celica Turbo 4WD Grifone Team sponsored by Viapol #33 - Andrea Navarra (IT) + Renzo Casazza (IT) - Network Q RAC Rally of Great Britain 1995 - photo-etched parts, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions image

Hasegawa: Car scale model kit 1/24 scale - Toyota Celica Turbo 4WD Grifone Team sponsored by Viapol #33 - Andrea Navarra + Renzo Casazza - Network Q RAC Rally of Great Britain 1995 - photo-etched parts, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Hasegawa Reference: 20594

New version of the Toyota Celica ST185 Turbo Hasegawa kit, choosing in this case the decoration of the unit that the Grifone team entered in the RAC Rally of England in 1995. Regarding other references of this model, only the decal sheet has been modified.
Click here for more details

Hasegawa: Car scale model kit 1/24 scale - Volkswagen Beetle Type 1 #21, 23, 28 - Yoshikazu Suzuki, Tatsuo Takeuchi, Masashi Ichise - Nippon Grand Prix 1963 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Hasegawa Reference: 20623

It may seem strange to us, but a car as mythical as the Volkswagen Beetle also had a presence in competition, as evidenced by its participation in the C-IV class in the first Japanese Grand Prix Car Racing Tournament held at the circuit of Suzuka on May 3, 1963, where he achieved the top three positions, the winner being car number #21 with Yoshikazu Suzuki at the wheel. Thus, the Beetle was one of the first cars to win at Suzuka, as the circuit opened at the end of 1962.
Click here for more details
Hasegawa: Car scale model kit 1/24 scale - Porsche 944 Turbo Asch Motor Sport Team sponsored by Druck-Chemie #16 - Roland Asch (DE) - Porsche Turbo Cup Series 1988 - photo-etched parts, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions image

Hasegawa: Car scale model kit 1/24 scale - Porsche 944 Turbo Asch Motor Sport Team sponsored by Druck-Chemie #16 - Roland Asch - Porsche Turbo Cup Series 1988 - photo-etched parts, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Hasegawa Reference: 20637

Limited edition of the Porsche 944 Turbo kit of the Porsche single-brand cup, this time with the decoration used by Roland Asch to dominate the 1988 edition of the German Cup with an iron hand. The kit allows you to reproduce the 2.5-liter 4-cylinder inline engine in full detail, as well as its detailed interior with all the accessories of the competition vehicle, and the retractable front headlights are mobile.
Click here for more details

Hasegawa: Car scale model kit 1/24 scale - Lancia 037 Rally sponsored by Martini - Shakedown Test Portugal Rally - Vinho do Porto 1985 - paint masks, plastic parts, rubber parts, water slide decals, assembly instructions and placement instructions

Hasegawa Reference: 20631

Hasegawa's limited edition of its Lancia 037 kit, this time with the decoration used in 1985 during the test days prior to the Portugal rally, where Lancia dressed the 037 completely in red, something that was not seen again until 1989.
Click here for more details
Yamamoto Model Parts: Lights 1/24 scale - Fog Lamps PIAA type - 3D printed parts - 4 units image

Yamamoto Model Parts: Lights 1/24 scale - Fog Lamps PIAA type - 3D printed parts - 4 units

Yamamoto Model Parts Reference: YMPTUN101

For a long time now, the fog lamps of cars were bulky elements, which were mounted separately on the front fenders, or which were placed on bulky grills. Some even wore permanent protection instead of covers to protect them from blows from stones or branches on the road, thinking especially of all-terrain vehicles. This Yamamoto Parts reference reproduces the PIAA brand headlights, with the brand name integrated into the protection piece. Each of the headlights is made up of three pieces; the focus, the transparent glass and the protective cover, facilitating its painting. The diameter of each of the lamps is approximately 5.5 mm.
Click here for more details
Yamamoto Model Parts: Detail 1/24 scale - JDM Horn - Hella Type - 3D printed parts - 4 units image

Yamamoto Model Parts: Detail 1/24 scale - JDM Horn - Hella Type - 3D printed parts - 4 units

Yamamoto Model Parts Reference: YMPTUN114

Pieces made in 3D printing to simulate the horns often visible through the front grilles of our models. For easier painting, each of the horns comes in two pieces, with the center part and outer casing separated. And no, we couldn't resist... Moc, Moc!
Click here for more details

Yamamoto Model Parts: Photo-etched parts 1/24 scale - Universal Racing Seat Mounting - Type 1 - photo-etched parts - 4 units

Yamamoto Model Parts Reference: YMPTUN110

Photo-etched plate with 4 units of the metal plates used to anchor the competition seats to the floor of the car. A whole detail!
Click here for more details
Yamamoto Model Parts: Photo-etched parts 1/24 scale - Universal Racing Seat Mounting - Type 2 - photo-etched parts - 4 units image

Yamamoto Model Parts: Photo-etched parts 1/24 scale - Universal Racing Seat Mounting - Type 2 - photo-etched parts - 4 units

Yamamoto Model Parts Reference: YMPTUN111

Photo-etched plate with 4 units of the metal plates used to anchor the competition seats to the floor of the car.
Click here for more details
Yamamoto Model Parts: Seat 1/24 scale - Recaro Speed - resin parts - 2 units image

Yamamoto Model Parts: Seat 1/24 scale - Recaro Speed - resin parts - 2 units

Yamamoto Model Parts Reference: YMPTUN112

Pair of seats that simulate the design of the famous Recaro Speed, which became the desired seat in any vehicle with sporting ambitions in the 80s. Each seat is divided into two pieces, with the base and backrest separated.
Click here for more details
Yamamoto Model Parts: Seat 1/24 scale - Sport seats Slide - resin parts - 2 units image

Yamamoto Model Parts: Seat 1/24 scale - Sport seats Slide - resin parts - 2 units

Yamamoto Model Parts Reference: YMPTUN113

Pair of seats that simulate the design of those marketed by the Slide brand for sports vehicles, with their characteristic "earmuffs" with holes to pass the belts.
Click here for more details

Model Factory Hiro: Car scale model kit 1/43 scale - Lancia D50 - Alberto Ascari - Test version 1954 - photo-etched parts, rubber parts, turned metal parts, water slide decals, white metal parts, assembly instructions and painting instructions

Model Factory Hiro Reference: MFH-K396

This reference of the Lancia D50 of the test version is differentiated by the side tanks, the hood and some details on the nose that differ from the specifications seen on the units used in the 1954 Monaco Grand Prix race.
Click here for more details
Print Lab Decals: Marking / livery 1/12 scale - Honda CB900F (750F) Bol D'or design - water slide decals manufactured with digital technology - for Tamiya reference TAM14006 image

Print Lab Decals: Marking / livery 1/12 scale - Honda CB900F (750F) Bol D'or design - water slide decals manufactured with digital technology - for Tamiya reference TAM14006

Print Lab Decals Reference: PLB2-264913

In 1979, Honda introduced the CB900F, defined by the brand itself as a "thunderous super-sport motorcycle, with devastating performance and unbreakable endurance." Initially known as the CB900F Super Sport, it would be renamed Bol d'Or in honour of the French 24-hour endurance race for motorcycles, where Honda had won 4 consecutive editions, from 1976 to 1979. The CB900F shared many elements and characteristics with the CB750F, making the Tamiya kit a great base for recreating this model. The decal sheet includes several replacement decals, allowing more than one unit to be made.
Click here for more details
Studio27: Car scale model kit 1/20 scale - Minardi M191B sponsored by Campogalliano Ceramica #23, 24 - Christian Fittipaldi (BR), Gianni Morbidelli (IT) - Early season, FIA Formula 1 World Championship 1992 - photo-etched parts, resin parts, rubber parts, turned metal parts, water slide decals, white metal parts and assembly instructions image

Studio27: Car scale model kit 1/20 scale - Minardi M191B sponsored by Campogalliano Ceramica #23, 24 - Christian Fittipaldi, Gianni Morbidelli - Early season, FIA Formula 1 World Championship 1992 - photo-etched parts, resin parts, rubber parts, turned metal parts, water slide decals, white metal parts and assembly instructions

Studio27 Reference: ST27-FK20344

Minardi's engine change for the 1992 season did not go down well. The Lamborghini 3.5-liter V12 engine unit did not prove as competitive as the 1991 Ferrari engine, and the results suffered. The kit, made of high-quality resin, also includes white metal parts and a complete photo-etched plate. The decal sheet allows the versions corresponding to the first 4 Grands Prix of the 1992 season to be made, before the M192 appeared at the San Marino Grand Prix in mid-May.
Click here for more details
Studio27: Transkit 1/20 scale - Ferrari 643 Scuderia Ferrari Team sponsored by Pioneer #27, 28 - Alain Prost (FR), Jean Alesi (FR) - French Formula 1 Grand Prix 1991 - metal parts, photo-etched parts, resin parts, seatbelt fabric, vacuum formed parts, water slide decals, white metal parts and assembly instructions - for Tamiya references TAM20023 and TAM20024 image

Studio27: Transkit 1/20 scale - Ferrari 643 Scuderia Ferrari Team sponsored by Pioneer #27, 28 - Alain Prost, Jean Alesi - French Formula 1 Grand Prix 1991 - metal parts, photo-etched parts, resin parts, seatbelt fabric, vacuum formed parts, water slide decals, white metal parts and assembly instructions - for Tamiya references TAM20023 and TAM20024

Studio27 Reference: ST27-TK2076

Scuderia Ferrari evolved its car for the 1991 season, giving birth to the Ferrari 643. The results were not as brilliant as the previous season, the best results being Alain Prost's three second places, one of them precisely at the French Grand Prix. held at Magny-Cours, with his teammate Jean Alesi finishing in fourth position. Thanks to this Studio27 transkit, you can transform the Tamiya kit of the Ferrari F189 into the single-seater used during the 1991 season. The transkit includes resin and white metal parts, a complete photo-etched plate and a decal sheet with the logos used on both Scuderia Ferrari cars.
Click here for more details
Studio27: Transkit 1/20 scale - Ferrari 643 Scuderia Ferrari Team sponsored by Pioneer #27, 28 - Alain Prost (FR), Jean Alesi (FR) - Japanese Formula 1 Grand Prix 1991 - metal parts, photo-etched parts, resin parts, seatbelt fabric, water slide decals, white metal parts and assembly instructions - for Tamiya references TAM20023 and TAM20024 image

Studio27: Transkit 1/20 scale - Ferrari 643 Scuderia Ferrari Team sponsored by Pioneer #27, 28 - Alain Prost, Jean Alesi - Japanese Formula 1 Grand Prix 1991 - metal parts, photo-etched parts, resin parts, seatbelt fabric, water slide decals, white metal parts and assembly instructions - for Tamiya references TAM20023 and TAM20024

Studio27 Reference: ST27-TK2077

The expectations of the Scuderia Ferrari after its good results in 1990 were not met in 1991, with the Ferrari 643 being slower than expected compared to the McLaren or the Williams. At the Japanese Grand Prix held at Suzuka Alain Prost finished in fourth position, while Jean Alesi abandoned on the first lap wrapped in a smoke screen. But the surprise came after the Grand Prix, when Alain Prost was fired from Ferrari after a statement comparing his car with a "truck", which was not liked within the team. Thanks to this Studio27 transkit, you can transform the Ferrari F189 Tamiya kit into the single-seater used in the 1991 Japanese GP. The transkit consists of resin and white metal parts, a complete photo-etched plate and a sheet Decals with the logos used on both Scuderia Ferrari cars..
Click here for more details
Revell: Car scale model kit 1/24 scale - Land Rover Serie III LWB Commercial - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Revell: Car scale model kit 1/24 scale - Land Rover Serie III LWB Commercial - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Revell Reference: REV07056

No less than 184 pieces to build this new commercial version of the classic Land Rover kit with all realism. And with the necessary parts to also recreate its four-cylinder diesel engine. dashboard for left or right hand drive, and different country options for its various license plates and nameplates on the decal sheet. With respect to the State Wagon version, the body has only three doors, a configuration of smaller windows, a spare wheel on the hood or protective grilles for the headlights. Choose yours!
Click here for more details
Studio27: Transkit 1/20 scale - Tyrrell Ford P34 Tyrrell Racing Team sponsored by Elf #3 - Jody Scheckter (ZA) - BRDC International Trophy 1976 - photo-etched parts, resin parts, water slide decals, white metal parts and assembly instructions - for Tamiya reference TAM20058 image

Studio27: Transkit 1/20 scale - Tyrrell Ford P34 Tyrrell Racing Team sponsored by Elf #3 - Jody Scheckter - BRDC International Trophy 1976 - photo-etched parts, resin parts, water slide decals, white metal parts and assembly instructions - for Tamiya reference TAM20058

Studio27 Reference: ST27-TK2069

Transkit to convert the Tyrrell P34 Tamiya kit into the version that made its debut on the tracks on the occasion of the BRDC International Trophy in 1976, with Jody Scheckter at the wheel. It was not its "official debut", not because the race was a not-scored event, but because finally Scheckter, after testing the car in practice, decided to participate in the race with his Tyrrell 007, but it was the first laps of the P34 in an event of F1 and, furthermore, and as a curious fact, it is the only version of the P34 that had a raised air intake, since for the next race, the Spanish Grand Prix, where the P34 already competed in its first race and which officially considered its debut, these types of air intakes were prohibited. The transkit includes resin parts for the nose, the engine cover with the raised air intake and the cockpit, white metal parts for the mechanical parts, two complete photo-etched plates plus an extra one to use as a template to paint the logos of Goodyear tires, and a decal sheet.
Click here for more details
Studio27: Marking / livery 1/12 scale - Ducati Desmosedici GP6 Ducati Marlboro Team sponsored by Alice Breil #15, 65 - Manuel 'Sete' Gibernau (ES), Loris Capirossi (IT) - Italian Moto GP Grand Prix 2006 - water slide decals and placement instructions - for Tamiya references TAM14101 and TAM14103 image

Studio27: Marking / livery 1/12 scale - Ducati Desmosedici GP6 Ducati Marlboro Team sponsored by Alice Breil #15, 65 - Manuel 'Sete' Gibernau, Loris Capirossi - Italian Moto GP Grand Prix 2006 - water slide decals and placement instructions - for Tamiya references TAM14101 and TAM14103

Studio27 Reference: ST27-DC747C

Decal sheet with which to reproduce this very special version of the Ducati GP06 used in the 2006 Mugello Moto GP Grand Prix, on the occasion of the celebration of the 80th birthday of the Borgo Panigale brand, where the green and silver colors were added to the typical Ducati red. In this race the top three finished separated by a narrow margin of just 735 thousandths, with Loris Capirossi second among two Moto GP champions, with Valentino Rossi first and Nicky Hayden third. Sete Gibernau rounded off Ducati's good overall result with a fifth position.
Click here for more details
Revell: Special vehicle scale model kit 1/24 scale - Mercedes-Benz Schlingmann Unimog U1300L TLF 8/18 - plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions image

Revell: Special vehicle scale model kit 1/24 scale - Mercedes-Benz Schlingmann Unimog U1300L TLF 8/18 - plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Revell Reference: REV07512

This kit, with 210 pieces, is characterized by its different parts that are fully detailed and realistic. The side blinds can be opened to reveal the fire equipment. Even its 6-cylinder engine is carefully reproduced. Its decal sheet offers the possibility to recreate versions of different fire brigades (Trier, Bad Oeynhausen, Höxter, Braunschweig, Venlo, Salzburg, Altstätten, Belgium). Once assembled, the model has a length of 232mm, a width of 108mm and a height of 142mm.
Click here for more details
SK Decals: Marking / livery 1/24 scale - Mercedes AMG GT3 Evo Craft-Bamboo Racing Team sponsored by Z Challenger #95 - Darryl O'Young (HK) - Macau GT Cup 2021 - paint masks, water slide decals and placement instructions - for Tamiya references TAM24345 and TAM24350 image

SK Decals: Marking / livery 1/24 scale - Mercedes AMG GT3 Evo Craft-Bamboo Racing Team sponsored by Z Challenger #95 - Darryl O'Young - Macau GT Cup 2021 - paint masks, water slide decals and placement instructions - for Tamiya references TAM24345 and TAM24350

SK Decals Reference: SK-24168

Behind Darryl O'Young's victory in the GT Cup held in Macau there is a whole story of improvement and good work by the team, since during the course of the first race his driver suffered a strong impact, destroying the car. The race was suspended because, due to lack of light, it was impossible to restart the race, so despite the accident, O'Young finished the first race in second position... but now a new race began in the pits to rebuild the car overnight and could be ready for the second race the next day. The team achieved the feat of having the car on time, and the driver rewarded them with a perfect performance, winning the second race and, with it, the overall event count. A story like this well deserved such a well-made decal, and thus be able to reproduce this eye-catching version of the Mercedes AMG GT3 Evo.
Click here for more details
SK Decals: Marking / livery 1/24 scale - Mercedes AMG GT3 Evo Ram Racing Team sponsored by D2 Privat #8 - Mikaël Grenier (CA) + Ian Loggie (GB) + Morgan Tillbrook (GB) - Intercontinental GT Challenge 2022 - water slide decals and placement instructions - for Tamiya references TAM24345 and TAM24350 image

SK Decals: Marking / livery 1/24 scale - Mercedes AMG GT3 Evo Ram Racing Team sponsored by D2 Privat #8 - Mikaël Grenier + Ian Loggie + Morgan Tillbrook - Intercontinental GT Challenge 2022 - water slide decals and placement instructions - for Tamiya references TAM24345 and TAM24350

SK Decals Reference: SK-24169

The 2022 Gulf 12 Hours was held at Yas Marina Circuit on December 2022, and it was the final round of the 2022 Intercontinental GT Challenge. For the ocassion, the Ram Racing team decided to compete with a special livery recognizing the designs of the D2 phone company that sponsored Mercedez-Benz DTM and GT1 machinery in the 1990s. How we love these tribute decorations!
Click here for more details
SK Decals: Marking / livery 1/24 scale - Mercedes AMG GT3 Evo GruppeM Racing Team sponsored by Mann Filter #999 - Maro Rene Engel (DE) + Mikaël Grenier (CA) + Raffaele Marciello (IT) - 12 hours Bathurst 2023 - paint masks, water slide decals and placement instructions - for Tamiya references TAM24345 and TAM24350 image

SK Decals: Marking / livery 1/24 scale - Mercedes AMG GT3 Evo GruppeM Racing Team sponsored by Mann Filter #999 - Maro Rene Engel + Mikaël Grenier + Raffaele Marciello - 12 hours Bathurst 2023 - paint masks, water slide decals and placement instructions - for Tamiya references TAM24345 and TAM24350

SK Decals Reference: SK-24171

Decal sheet to reproduce the impressive and striking Mercedes AMG GT3 Evo that participated in the 2023 Bathurst 12 Hours, an event included in the Intercontinental GT Challenge, and where it obtained pole position, achieving the fastest lap ever given by the GT3 vehicle in this incredible and complicated circuit.
Click here for more details
SK Decals: Marking / livery 1/24 scale - Mercedes AMG GT3 Evo GruppeM Racing Team sponsored by Affalterbach #55 - Maximilian Buhk (DE) + Maro Rene Engel (DE) + Mikaël Grenier (CA) - TotalEnergies 24 hours of Spa 2022 - water slide decals and placement instructions - for Tamiya references TAM24345 and TAM24350 image

SK Decals: Marking / livery 1/24 scale - Mercedes AMG GT3 Evo GruppeM Racing Team sponsored by Affalterbach #55 - Maximilian Buhk + Maro Rene Engel + Mikaël Grenier - TotalEnergies 24 hours of Spa 2022 - water slide decals and placement instructions - for Tamiya references TAM24345 and TAM24350

SK Decals Reference: SK-24172

The 24 Hours of Spa TotalEnergies was the second event of the Intercontinental GT Challenge of 2022, and this Mercedes GT3 Evo participated in it, with a striking decoration full of orange, red and purple tones, and sponsored by Affalterbach, where Mercedes-AMG manufactures the V8 engines and, from spring 2019, the new 4-cylinder high-performance engines. In the race the team achieved a creditable fourth place, finishing on the same lap as the winner.
Click here for more details