Newsletter 581: Stone Models

Stone Models

Stone Models
At SpotModel we always have our doors open to new manufacturers that arrive to the market, and these days we are celebrating the addition of the Stone Models (formerly known as F1Stone) references to our catalogue.

Have you taken a minute to observe the impressive details of their pieces? For example, brake calipers with built-in bleeders and transfer tubes between both sides of the calipers, or separate and differentiated hubs depending on the wheel on which they are mounted. We believe that from today onwards no one will install a single wheel on their F1 builds again in order to keep these fantastic pieces visible. Everyone get some scratch trestle stands ready!!!

As if that were not enough, among their references we find one of those cars that are unique only because of their rarity, the Andrea Moda, from those times when truly private teams still had a place in F1. Although they rarely qualified for the race, they gave atmosphere and color to the F1 paddock.

We are really delighted to welcome the friends of Stone Models to SpotModel. At this rate, soon we will even be able to purge circuits, and we will have to periodically check the liquid levels of our models... XD

Stone Models: Detail up set 1/20 scale - Ferrari 158 - 3D printed parts - for Revival kits 2009/M and 2011/M image

Stone Models: Detail up set 1/20 scale - Ferrari 158 - 3D printed parts - for Revival kits 2009/M and 2011/M

Stone Models Reference: A007-2021

Complete set of parts designed to detail the Ferrari 158 Revival references. Among the different parts you will find the seat, the switch console, the steering wheel, the two upper shock absorber cups, an additional container for the gearbox gases, the gear shift console, the two front brake calipers, different pieces to simulate the back of the cockpit dials, four ignition coils, two sets of switches and push buttons, and a new set of rims. Spectacular!
Click here for more details
Stone Models: Chain set 1/9 scale - BMW HP4 Race - 3D printed parts - for Meng Model references MT-004 and MT-004s image

Stone Models: Chain set 1/9 scale - BMW HP4 Race - 3D printed parts - for Meng Model references MT-004 and MT-004s

Stone Models Reference: A016-2022

Chain and sprocket set to use in the references of Meng's BMW HP4 Race kit. The chain opens in the front sprocket area to allow assembly, and is closed by an additional chain link after assembly. The set includes 9 pieces: the rear sprocket and its five mounting screws, the front sprocket, the detailed open link chain and the additional link.
Click here for more details
Stone Models: Figure 1/20 scale - Max Verstappen figure 1 - 3D printed parts, water slide decals manufactured with digital technology and other materials - 1 units image

Stone Models: Figure 1/20 scale - Max Verstappen figure 1 - 3D printed parts, water slide decals manufactured with digital technology and other materials - 1 units

Stone Models Reference: A017-2022

3D printed figure of a modern F1 driver with thumbs up (based on Max Verstappen's pose at the 2021 Turkish Grand Prix). The set includes a figure with the HANS system, a full-face helmet with the visor closed, the attachment system for the HANS and digitally printed decals with RB sponsors in 2021.
Click here for more details
Stone Models: Chain set 1/9 scale - Kawasaki Ninja H2R - 3D printed parts - for Meng Model references MT-001, MT-001s, MT-002s, MT-002S, MENMT-002S and MT002S image

Stone Models: Chain set 1/9 scale - Kawasaki Ninja H2R - 3D printed parts - for Meng Model references MT-001, MT-001s, MT-002s, MT-002S, MENMT-002S and MT002S

Stone Models Reference: A020-2022

Chain and sprocket set to use in the references of Meng's Kawasaki Ninja H2R kit. The chain opens in the front sprocket area to allow assembly, closing with an additional chain link after assembly. The set includes 4 pieces: the rear sprocket, the front sprocket, the detailed open link chain and the additional link.
Click here for more details
Stone Models: Brakes 1/20 scale - Ferrari F1/89 640 - 3D printed parts and water slide decals manufactured with digital technology - for Tamiya references TAM20023 and TAM20024 image

Stone Models: Brakes 1/20 scale - Ferrari F1/89 640 - 3D printed parts and water slide decals manufactured with digital technology - for Tamiya references TAM20023 and TAM20024

Stone Models Reference: A030-2023

Complete brake set designed for use on the Ferrari F189 Tamiya kit. Included are 4 brake discs, which can be placed directly on the kit without the need for further adjustments, 4 brake calipers (2 on the left side and 2 on the right side), which are much more detailed than the original ones on the kit, including the bleeders, the lower connection tube between both caliper bodies and the pad retaining screws, 4 brake disc cores (2 front and 2 rear), and 2 sets of central wheel nuts with stem, in case you prefer to opt for a presentation of the model of the car with the wheels removed. The set includes a small sheet of decals with the Brembo logos.
Click here for more details
Stone Models: Brakes 1/20 scale - McLaren Honda MP4/4 - 3D printed parts - for Tamiya references TAM20022, TAM89719 and TAM92208 image

Stone Models: Brakes 1/20 scale - McLaren Honda MP4/4 - 3D printed parts - for Tamiya references TAM20022, TAM89719 and TAM92208

Stone Models Reference: A032-2023

Complete brake set designed for use on the Mclaren MP4/4 Tamiya kit. Included are 4 brake discs, which can be placed directly on the kit without the need for further adjustments, 8 brake calipers (4 on the left side and 4 on the right side), which are much more detailed than the original ones on the kit, including the bleeders and the lower connection tube between both caliper bodies, 4 brake disc cores (2 front and 2 rear), and 2 sets of central wheel nuts with stem, in case you prefer to opt for a presentation of the model of the car with the wheels removed.
Click here for more details
Stone Models: Car scale model kit 1/20 scale - Andrea Moda Judd S921 sponsored by Ellesse #34, 35 - Roberto Moreno (BR), Perry McCarthy (GB) - Monaco Formula 1 Grand Prix 1992 - 3D printed parts, photo-etched parts, seatbelt fabric, water slide decals, other materials and assembly instructions image

Stone Models: Car scale model kit 1/20 scale - Andrea Moda Judd S921 sponsored by Ellesse #34, 35 - Roberto Moreno, Perry McCarthy - Monaco Formula 1 Grand Prix 1992 - 3D printed parts, photo-etched parts, seatbelt fabric, water slide decals, other materials and assembly instructions

Stone Models Reference: A021-2022

For all those Formula 1 lovers, Stone Models has developed the 1992 Andrea Moda, which only managed to qualify to compete in one race, precisely the Monaco Grand Prix in the hands of Roberto Moreno, although he had to retire due to engine problems after only 11 laps... and that was all the laps that an Andrea Moda officially competed in a Grand Prix. That's why it has its charm! A curbside kit which faithfully reproduces the shapes of the car, without an engine, but with great detail of the visible area of the gearbox and rear wing support.
Click here for more details
Stone Models: Brakes 1/20 scale - McLaren Honda MP4/5B - 3D printed parts and water slide decals manufactured with digital technology - for Tamiya references TAM20026, TAM89720 and TAM92209 image

Stone Models: Brakes 1/20 scale - McLaren Honda MP4/5B - 3D printed parts and water slide decals manufactured with digital technology - for Tamiya references TAM20026, TAM89720 and TAM92209

Stone Models Reference: A027-2023

Complete brake set designed for use on the McLaren MP4/5B Tamiya kit. Included are 4 brake discs, which can be placed directly on the kit without the need for further adjustments, 4 brake calipers (2 on the left side and 2 on the right side), which are much more detailed than the original ones on the kit, including the bleeders and the lower connection tube between both caliper bodies, and 5 central wheel nuts with stem, in case you prefer to opt for a presentation of the model of the car with the wheels removed. The set includes a small sheet of decals with the Brembo logos.
Click here for more details
Stone Models: Brakes 1/20 scale - McLaren Honda MP4/5 - 3D printed parts and water slide decals manufactured with digital technology - for Fujimi references FJ090573, 09057, GP-16, GP16, FJ09062, 090627, GP-19, FJ090627, 09062, GP-19, FJ090665, 09066, GP-22, FJ090719, 09071, GPSP-14, FJ091938, 09193 and GP-1 image

Stone Models: Brakes 1/20 scale - McLaren Honda MP4/5 - 3D printed parts and water slide decals manufactured with digital technology - for Fujimi references FJ090573, 09057, GP-16, GP16, FJ09062, 090627, GP-19, FJ090627, 09062, GP-19, FJ090665, 09066, GP-22, FJ090719, 09071, GPSP-14, FJ091938, 09193 and GP-1

Stone Models Reference: A028-2023

Complete brake set designed for use on the McLaren MP4/5 Fujimi kit. Included are 4 brake discs, which require small adjustments to be able to be placed on the kit parts, 4 brake calipers (2 on the left side and 2 on the right side), which are much more detailed than the original ones on the kit, including the bleeders and the lower connection tube between both caliper bodies, and 5 central wheel nuts with stem, in case you prefer to opt for a presentation of the model of the car with the wheels removed. The set includes a small sheet of decals with the Brembo logos.
Click here for more details
Stone Models: Brakes 1/20 scale - Lotus Honda 99T - 3D printed parts and water slide decals manufactured with digital technology - for Tamiya references TAM20020 and TAM20057 image

Stone Models: Brakes 1/20 scale - Lotus Honda 99T - 3D printed parts and water slide decals manufactured with digital technology - for Tamiya references TAM20020 and TAM20057

Stone Models Reference: A029-2023

Complete brake set designed for use on the Lotus 99T Tamiya kit. Included are 4 brake discs, which can be placed directly on the kit without the need for further adjustments, 4 brake calipers (2 on the left side and 2 on the right side), which are much more detailed than the original ones on the kit, including the bleeders, the lower connection tube between both caliper bodies and the straight spring for holding the pads, 4 brake disc cores (2 front and 2 rear), and 2 sets of 4 central wheel nuts with stem, in case you prefer to opt for a presentation of the model of the car with the wheels removed. The set includes a small sheet of decals with the Brembo logos.
Click here for more details
Model Factory Hiro: Car scale model kit 1/12 scale - Honda RA300 Honda Racing Team #3, 14 - John Surtees (GB) - Italian Formula 1 Grand Prix, USA - United States of America Formula 1 Grand Prix 1967 - metal parts, photo-etched parts, resin parts, rubber parts, seatbelt fabric, turned metal parts, vacuum formed parts, water slide decals, white metal parts, assembly instructions and painting instructions image

Model Factory Hiro: Car scale model kit 1/12 scale - Honda RA300 Honda Racing Team #3, 14 - John Surtees - Italian Formula 1 Grand Prix, USA - United States of America Formula 1 Grand Prix 1967 - metal parts, photo-etched parts, resin parts, rubber parts, seatbelt fabric, turned metal parts, vacuum formed parts, water slide decals, white metal parts, assembly instructions and painting instructions

Model Factory Hiro Reference: MFH-K815

A single single-seater lined up the Honda team for 9 of the 11 rounds of the Formula 1 World Championship in 1967, starting the season with the RA273, which was replaced from august by the RA300, with which it achieved the best result of the season in the Italian GP, where John Surtees took victory, in what was Honda's second victory in F1.
Click here for more details

Model Factory Hiro: Car scale model kit 1/12 scale - Auto Union Type-C #2, 4 - Hans Stuck, Bernd Rosemeyer - German Formula 1 Grand Prix 1936 - photo-etched parts, resin parts, rubber parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts, assembly instructions and painting instructions

Model Factory Hiro Reference: MFH-K816

Model Factory Hiro delights us with the 1/12 scale reproduction of the car with which Rosemeyer was proclaimed champion of Europe in 1936. A season of four races, where he got the victories in the grand prix of Germany, Switzerland and Italy, having to leave in Monaco. Its impressive 16-cylinder V-engine had increased its displacement to 6 liters, delivering 520 hp. A model in which various materials are used, such as white metal, resin, photo-etched parts, turned metal parts, rubber tires, decals and various cables. The rims, the dashboard clocks, the fuel cap and the end of the silencer are made of turned aluminium. The front and rear top covers can be removed, allowing a full view of the finished interior detailing. The kit is based on the version used at the 1936 German GP.
Click here for more details
Tamiya: Motorbike scale model kit 1/12 scale - Honda CX500 Turbo - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions image

Tamiya: Motorbike scale model kit 1/12 scale - Honda CX500 Turbo - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Tamiya Reference: TAM14016

The glorious Honda CX500 Turbo from the 80s returns to the Tamiya catalog in a limited production in 1/12 scale. Don't miss the opportunity to built a motorcycle that is unique in many aspects, and which was the first motorcycle to incorporate a turbocharger.
Click here for more details
Studio27: Detail up set 1/24 scale - Mazda 787B - photo-etched parts and assembly instructions - for Tamiya references TAM24112, TAM24326 and TAM24352 image

Studio27: Detail up set 1/24 scale - Mazda 787B - photo-etched parts and assembly instructions - for Tamiya references TAM24112, TAM24326 and TAM24352

Studio27 Reference: ST27-FP24225

Limited time re-edition of these Studio27 photo-etched parts for the Mazda 787B by Tamiya.
Click here for more details

Studio27: Detail up set 1/24 scale - Lancia 037 Rally - photo-etched parts - for Hasegawa references 20264, 20277, 20299, 20399, 20414, 20447, 20485, 20523, 20566, 20584, 20631, 20681, 25030, CR-30, 25030.OUTLET, 52305, SP505, HACR30, 25030 and CR-30

Studio27 Reference: ST27-FP24226

Like a glove! That's the first thing that came to mind when we saw the set of photo-etched parts by Studio27 for the Lancia 037 Rally, The grilles on the front and rear hoods, the huge rear mud flaps, the brake discs, the front radiators, and some very useful templates to paint the Pirelli logos on the tires and on the rear grille, are just some of the parts that we can improve. The Lancia 037 will undoubtedly always be one of our favourites!
Click here for more details
Studio27: Detail up set 1/24 scale - Porsche Carrera GT - photo-etched parts and assembly instructions - for Tamiya reference TAM24275 image

Studio27: Detail up set 1/24 scale - Porsche Carrera GT - photo-etched parts and assembly instructions - for Tamiya reference TAM24275

Studio27 Reference: ST27-FP24227

Short-time re-edition of these fantastic Studio27 photo-etched parts for the Tamiya Porsche Carrera GT kit, including the engine cover grids !!!
Click here for more details
Studio27: Detail up set 1/24 scale - Lancia Super Delta HF Integrale - photo-etched parts, seatbelt fabric, white metal parts and assembly instructions - for Hasegawa references 20433, 25013, CR-13, 20457, 20507, 20548, 20601, 20648, 20685, 25015, CR-15, HACR15, 25015 and CR-15 image

Studio27: Detail up set 1/24 scale - Lancia Super Delta HF Integrale - photo-etched parts, seatbelt fabric, white metal parts and assembly instructions - for Hasegawa references 20433, 25013, CR-13, 20457, 20507, 20548, 20601, 20648, 20685, 25015, CR-15, HACR15, 25015 and CR-15

Studio27 Reference: ST27-FP24181

Photo-etched parts to improve the realism of the gorgeous Lancia Super Delta HF Integrale kit by Hasegawa. As you can see in the images, it includes, among other parts, the Tour de Corse and Monte Carlo rally plates, windshield wipers, harness buckles, the characteristic front grill, pedals, etc. And also, also the red fabric to make the belts.
Click here for more details
Studio27: Transkit 1/20 scale - McLaren Honda MP4/6 McLaren Racing Limited Team sponsored by Marlboro #1, 2 - Ayrton Senna da Silva (BR), Gerhard Berger (AT) - Brazilian Formula 1 Grand Prix 1991 - photo-etched parts, resin parts, water slide decals, white metal parts, assembly instructions and tobacco sponsor decals - for Fujimi references FJ09044, GP10, 090443, FJ090443, FJ090443, 09044, GP10, FJ09044, FJ09073, FJ090730, 090730, 090733, FJ09081, 090818, GP-38, FJ090818, 09081, GP-38, FJ091693, GP-53, FJ09173, FJ092133, 09213, FJ09213 and FUJ09213 image

Studio27: Transkit 1/20 scale - McLaren Honda MP4/6 McLaren Racing Limited Team sponsored by Marlboro #1, 2 - Ayrton Senna da Silva, Gerhard Berger - Brazilian Formula 1 Grand Prix 1991 - photo-etched parts, resin parts, water slide decals, white metal parts, assembly instructions and tobacco sponsor decals - for Fujimi references FJ09044, GP10, 090443, FJ090443, FJ090443, 09044, GP10, FJ09044, FJ09073, FJ090730, 090730, 090733, FJ09081, 090818, GP-38, FJ090818, 09081, GP-38, FJ091693, GP-53, FJ09173, FJ092133, 09213, FJ09213 and FUJ09213

Studio27 Reference: ST27-TK2026R

Complete transkit to carry out with maximum fidelity the version with which Ayrton Senna achieved victory in the 1991 Brazilian Grand Prix held at the Interlagos circuit. Its parts allow you to build the correct front and rear wings, apart from modifying other elements, such as the side radiators, the air outlets on the side pontoons or the complete nose. In addition, the decals include the tobacco logos, and it has a complete photo-etched plate. Designed to be used with any of the Fujimi kit references.
Click here for more details

Beemax Model Kits: Detail up set 1/24 scale - Porsche 935 K2 1978 - metal parts, photo-etched parts, seatbelt fabric, turned metal parts and placement instructions - for Beemax Model Kits reference BX24025

Beemax Model Kits Reference: EX24025

Set of photo-etched parts to detail the kit of the Beemax 1978 Le Mans Porsche 935. Compared to the 1977 version, this set incorporates some extra parts, such as grilles for the Naca intakes or covers for the different registers present on the front hood. It also includes the fabric to simulate the harnesses and turned metal parts for elements such as the base of the antenna.
Click here for more details
Studio27: Decals - White 130 x 130 mm - water slide decals image

Studio27: Decals - White 130 x 130 mm - water slide decals

Studio27 Reference: ST27-FP0042

White decal sheet size 130 x 130 mm.
Click here for more details
Studio27: Decals - White lines 5mm and 8mm - water slide decals image

Studio27: Decals - White lines 5mm and 8mm - water slide decals

Studio27 Reference: ST27-FP0043

Decal sheet with white lines in sizes 5 mm and 8 mm wide. 4 stripes of each of the measures are included.
Click here for more details
Studio27: Decals - White lines 1mm, 2mm and 3mm - water slide decals image

Studio27: Decals - White lines 1mm, 2mm and 3mm - water slide decals

Studio27 Reference: ST27-FP0044

Decal sheet with white lines in sizes 1 mm, 2 mm and 3 mm wide. 5 stripes of each of the measures are included.
Click here for more details