Newsletter 567: ...and more to come!!!

Second of the references of the new Belkits scale kit of one of the most modern WRCs, the Hyundai i20, with which Thierry Neuville began the 2020 season in the best possible way, winning the Monte Carlo Rally. The decals will also choose between the units of Loeb (sixth classified) and Tanak, who had to leave after a chilling accident. Apart from the exterior decoration, the decals include a second sheet with the fiber patterns of many of the car's parts, both interior and exterior, and are printed by Cartograf. Soon more news.

Limited series of the Hasegawa kit to make the winning version in 1990 of another mythical race, the Guia Race of Macau. The kit includes as a novelty the smaller exterior mirrors, the three-spoke steering wheel specific to this version, as well as the beautiful 6-arm SSR rims.

Extra-fine black flock to recreate the upholstery and carpets of your models. For a correct finish, apply with a strainer or similar over a layer of white glue diluted in water. It is recommended that the piece to be upholstered has been previously painted in a color similar to the chosen flock.

Extra-fine light grey flock to recreate the upholstery and carpets of your models. For a correct finish, apply with a strainer or similar over a layer of white glue diluted in water. It is recommended that the piece to be upholstered has been previously painted in a color similar to the chosen flock.

Extra-fine beige flock to recreate the upholstery and carpets of your models. For a correct finish, apply with a strainer or similar over a layer of white glue diluted in water. It is recommended that the piece to be upholstered has been previously painted in a color similar to the chosen flock.

Extra-fine bordeaux flock to recreate the upholstery and carpets of your models. For a correct finish, apply with a strainer or similar over a layer of white glue diluted in water. It is recommended that the piece to be upholstered has been previously painted in a color similar to the chosen flock.

Extra-fine brown flock to recreate the upholstery and carpets of your models. For a correct finish, apply with a strainer or similar over a layer of white glue diluted in water. It is recommended that the piece to be upholstered has been previously painted in a color similar to the chosen flock.

Extra-fine light brown flock to recreate the upholstery and carpets of your models. For a correct finish, apply with a strainer or similar over a layer of white glue diluted in water. It is recommended that the piece to be upholstered has been previously painted in a color similar to the chosen flock.

Extra-fine red flock to recreate the upholstery and carpets of your models. For a correct finish, apply with a strainer or similar over a layer of white glue diluted in water. It is recommended that the piece to be upholstered has been previously painted in a color similar to the chosen flock.

Extra-fine yellow flock to recreate the upholstery and carpets of your models. For a correct finish, apply with a strainer or similar over a layer of white glue diluted in water. It is recommended that the piece to be upholstered has been previously painted in a color similar to the chosen flock.

Extra-fine blue flock to recreate the upholstery and carpets of your models. For a correct finish, apply with a strainer or similar over a layer of white glue diluted in water. It is recommended that the piece to be upholstered has been previously painted in a color similar to the chosen flock.

Extra-fine dark blue flock to recreate the upholstery and carpets of your models. For a correct finish, apply with a strainer or similar over a layer of white glue diluted in water. It is recommended that the piece to be upholstered has been previously painted in a color similar to the chosen flock.

Beautiful kit of the even more beautiful Brabham BT52 as it took part in the Monaco Grand Prix in 1983, where Nelson Piquet finished in second place, while Riccardo Patrese had to retire. At the end of the season, Piquet won his second drivers' title. A very complete kit with extensive number of parts, including its powerful BMW M12 Turbo 4-cylinder inline engine with a displacement of only 1.5 litres. Don't miss it!!

New kit of the Silverline series by Tameo Kits, this time of the Williams Renault FW16 at the 1994 San Marino Formula 1 Grand Prix, held at the Enzo e Dino Ferrari Autodromo located in Imola, sadly famous for being the Grand Prix where Ayrton Senna lost his life during the race. Although the FW16 has been available in the Tameo Kits range for some time now, this new reference has been updated with the specific details of the 1994 San Marino GP, without using parts from previous versions. The instruction manual is printed in full colour, and includes several archival photographs from the Imola weekend. Among the pieces that make up the model, those made of white metal stand out, complemented with photo-etched parts, rubber tires and decals.

Decal sheet to make any of the two units entered by the official Ford team in the 1991 Rally de Portugal, where both cars had to retire. The set of decals is not complete, that is, some of the decals from the kit corresponding to the Monte Carlo Rally version (reference DM-K001) have to be used. Also included is a set of 4 resin Compomotive rims to be used with the kit tires, since some of the stages of the first leg of the rally were run on asphalt.

Set of 4 Compomotive rims with 8 arms and four bolts like those used in the Ford Sierra Cosworth 4x4 Group A during the 1991 season on asphalt stages, to be assembled with the tires from the D.Modelkits kit. The set includes two resin rings to add to the central part of the ventolins that come with the kit, in case you want to assemble them.

Complete set of photo-etched parts made up of two plates to detail the Italeri MAN F8 kit with reference 756.

Set of screws made by 3D printing designed to be used in your 1/12 scale motorcycle kits. Includes 9 different screw head designs, such as slot head, hex nut, torx head, etc., which can be freely used for detailing fairing, engine, chassis, transmission parts, etc. The set includes between 10 and 50 pieces for each type of screw.

It is perhaps the most famous version of those used by Honda in its participations with the NSX in the 24 hours of Le Mans. Not in vain, not only did he manage to finish the race in a more than creditable eighth place, but he also obtained first position among all the vehicles in the GT2 category. Studio27 offers us the possibility of assembling this version, with a kit made of an exquisite resin, complemented with white metal parts, an extensive photo-etched plate, vacuum-formed for transparent ones and a high-quality decal sheet. What a temptation!

When incorporating a turbocharger to an engine, it is almost mandatory to also install the intercooler, which is responsible for cooling the intake air before it is introduced into the engine. If you want to mount this element in your kit, or improve the detail that it already incorporates, this 3D printed intercooler can come in handy. The intercooler measures 20 x 6,8mm.

When incorporating a turbocharger to an engine, it is almost mandatory to also install the intercooler, which is responsible for cooling the intake air before it is introduced into the engine. If you want to mount this element in your kit, or improve the detail that it already incorporates, this 3D printed intercooler can come in handy. The intercooler measures 27,5 x 9,8mm.

When incorporating a turbocharger to an engine, it is almost mandatory to also install the intercooler, which is responsible for cooling the intake air before it is introduced into the engine. If you want to mount this element in your kit, or improve the detail that it already incorporates, this 3D printed intercooler can come in handy. The intercooler measures 33,5 x 13mm.

Time-limited reedition of this decal set including all tobacco sponsor logos for the Williams Renault FW14B in 1/20 scale, specifically designed for replacing the decals of the Fujimi kit.

High quality decals made in Japan to replace or complement those of the Tamiya kit. These decals belong to a limited reissue, so they will be available for a short time.

The HKS team faced the 1993 JTCC season with more confidence, and it was demonstrated by achieving victory in the third round held in Sugo. That season they used a very striking decoration that became a myth, being used later on other cars and being totally recognizable.

The spectacular Datsun 240Z achieved many successes in the American IMSA series, built and developed among others by Bob Sharp's team. This Arena Modelli reference allows you to choose between two versions that raced in the Road Atlanta 100-mile race, both with number #33. The first one is the one driven by Bob Sharp in 1975, who finished in tenth position overall, and the second option is the one driven by Sam Posey in 1977, who finished twelfth.

Resin kit to build the unit of the Porsche Carrera RSR that participated in the 5 Hours of Mid Ohio in 1974 with the drivers Bergstrom and Morton, where they failed to finish the test.

Resin kit to make another version of the Porsche RSR used by Bob Bergstrom in the 1974 season. This livery corresponds to the event held at the Laguna Seca circuit, with two individual races where he finished in sixth and seventh position.

Perhaps the Porsche 911 is the car with the most participations in the history of competitions, and with the most diverse modifications and evolutions, as shown by this version built by Alex Job Racing, which featured important changes to the chassis and bodywork, and that in the 12 Hours of Sebring in 1993 finished in eighteenth place overall.

Resin kit of the Porsche 911 unit built by the Alex Job Racing team during its participation in the 1993 Watkins Glen 500 km, where it finished in twenty-second position