Newsletter 566: MP4/2C

F1 lovers are still in luck, and it is now the turn of the car with which Alain Prost won the title of World Champion in 1986. The kit includes a large number of parts to recreate in detail both the chassis in carbon like the incredible V6 TAG Porsche engine. Includes photo-etched plates with details for the mechanical part, such as the TAG Turbo letters that go on the cylinder head covers or the belt buckles. Decal sheets include tobacco advertising and various patterns of fiber and composite parts.

Rally lovers are in luck... one more of those that were missing in plastic will finally be available shortly from the hand of Hasegawa, who with his new molds is raising the level in terms of detail, quality and fit. This kit reproduces the version of the second appearance of the Nissan Sunny in the World Championship after its debut in the Safari, the 1991 Acropolis rally, where things did not go so well. Llewellin could only finish ninth, while Blomqvist dropped out, but that doesn't mean we don't want to have him in our showcase anymore...

Improvement set for the Tamiya Ducati Superleggera V4 to replace the exhaust system with the titanium competition exhaust kit, as well as the lower casing that covers them and the necessary parts to remove the mirrors and the license plate. The exhausts include the springs, the lambda probe, the detailed welds between parts, the brackets and the necessary decals to simulate the logos engraved on the mufflers and the logo on the carbon protector of the right muffler. The high detail of this set of 3D printed parts by DECALCAS is such that it is supplied with a base to display it on its own, looking just like the spectacular DUCATI where they are mounted. Are you going to limit yourself to mounting them on your kit or do you dare to also mount them on their base to enjoy every last detail?

This is a limited edition decal.

Why don't Rothmans decals come with today's models? It is not entirely clear, but Tabu brings us the solution with this complete set of decals that includes, in addition to the tobacco logos, other logos that may be necessary to recreate the NSR500 from season 89.

You must have missed some of the sponsor logos on the decal sheet of your Fujimi kit of the Williams FW14B. If you are one of those who want to recreate the complete decoration, including the tobacco logos, this additional decal sheet is what you need.

Undoubtedly one of the most striking cars on the grid of the 1994 DTM season, with its asymmetrical three-tone livery. Of course, apart from the decals, to make a correct 1994 version of the DTM Alfa 155, this Studio27 transkit is essential, which not only allows you to modify the bodywork with different resin and white metal parts, but also allows you to increase the detail of many other mechanical and interior components. A touch of color for your collection!

Set of rain tires for the Tamiya 1/20 scale kit of the Tyrrell P34. The set also includes a photo-etched stencil to easily paint the Good Year logos on the tires.

Full color photo-etched parts to replace and improve the lights on the Scania S series Italeri kits. The parts include a drop of transparent resin to simulate the glass of the optics, although it is not shown in the images provided by the manufacturer.

The two decal sheets included in this Studio27 reference include all the carbon and Kevlar patterns to give the touch of realism that the Tamiya kit of the Ferrari F189 needs, both for the early and late season versions. Don't think twice, and complete your model with maximum detail!

Sad the reasons that led Jean-Pierre Jarier to replace Ronnie Peterson in the last two Grands Prix of the 1978 season, those of the United States and Canada, occupying the seat of the Lotus Ford 79 with the number #55. This decal sheet allows us to reproduce this version, with which Jarier nearly finished on the podium at Watkins Glen before running out of gas with four laps to go, and winning in Montreal after starting on pole, but had to retire due to an oil leak. Tobacco decals are included.

Up to three decal sheets make up this set of carbon fiber patterns for the Ferrari F60 Tamiya model kit. Two sets use the 1/20 scale metallic gray and black diagonal weave carbon fiber design, while the third sheet is based on the 1:24 scale bronze on black fiber. In total there are 26 carbon fiber patterns identified with the numbers of the parts of the kit on which they have to be placed.

Designed specifically for Tamiya's 1/20 scale kits of the Williams FW24, this set contains two sheets of carbon fiber decals with the patterns printed on the back of the paper, so that the different carbon parts have to be cut out. All the parts are numbered and coded in the same way as the part of the kit where they are placed.

Set of exterior rear-view mirrors with the standard design for the Ford Sierra Cosworth 4x4, which were also mounted on many of the competition versions of both group A and N. The parts are printed in ultra-high resolution 3D.

Detailed set of 4 9-spoke rims and 4 resin tires for NASCAR Championship vehicles, designed to be used on 1/24 scale kits, and ideal to replace the original ones on your Revell, Monogram and Salvinos JR kits. The total diameter of the rim + tire set is 29.6 mm, with a width of 14.2 mm. For an easier assembly, a set of Brakes NASCAR Type 1 or Brakes NASCAR Type 2 from Scalecar.Online is required, also available on SpotModel.

Detailed set of 4 5-spoke rims and 4 resin tires for NASCAR Championship vehicles, designed to be used on 1/24 scale kits, and ideal to replace the original ones on your Revell, Monogram and Salvinos JR kits. The total diameter of the rim + tire set is 29.6 mm, with a width of 14.2 mm. For an easier assembly, a set of Brakes NASCAR Type 1 or Brakes NASCAR Type 2 from Scalecar.Online is required, also available on SpotModel.

Fantastic set with the necessary parts to make four complete sets of brakes for NASCAR type vehicles. 4 brake discs with calipers and hubs are included, both front and rear for both sides. It even includes the brake pads! This set is designed to be used in 1/24 scale models, and ideal to replace the original ones of your Revell, Monogram and Salvinos JR models. To assemble this set of brakes it is recommended to use Bolts NASCAR type 1.

Fantastic set with the necessary parts to make four complete sets of brakes for NASCAR type vehicles. 4 brake discs with calipers and hubs are included, both front and rear for both sides. It even includes the brake pads! This set is designed to be used in 1/24 scale models, and ideal to replace the original ones of your Revell, Monogram and Salvinos JR models. To assemble this set of brakes it is recommended to use Bolts NASCAR type 2.

Complete support with up to 60 round nose studs with nut that simulate the design used in NASCAR Championship vehicles. The bolts with nut, which have a diameter of 0.7mm, are designed for use on 1/24 scale models, and are ideal for replacing the original ones on your Revell, Monogram and Salvinos JR kits. The pieces are delivered on a support for their protection during transport, which must be removed to be able to paint the pieces.

Complete support with up to 60 socket point studs with nut that simulate the design used in NASCAR Championship vehicles. The bolts with nut, which have a diameter of 0.7mm, are designed for use on 1/24 scale models, and are ideal for replacing the original ones on your Revell, Monogram and Salvinos JR kits. The pieces are delivered on a support for their protection during transport, which must be removed to be able to paint the pieces.

Support with 40 units of tire inflation valves made in resin by 3D printing. The valve design resembles that used on the rims of NASCAR championship cars, but can be used on other 1/25-1/24 scale models. The valves are delivered on a support with walls, which must be removed to be able to paint the pieces more easily.

Enjoy a Formula 1 classic from Tamiya, featuring the Ford DFV Costworth engine in full detail, a figurine for the pilot, chrome parts, rubber tyres (all six of them) and all the magic from Tamiya scale model kits.

In the seventies, the crisis that affected Lotus only had one way out, to revalue the market by going to the territory of Ferrari. The result was the Esprit, designed by Giugiaro. A supercar with angular lines that ended up rivaling head-to-head with Porsche or Ferrari. This kit allows you to reproduce one of the first versions of the Esprit, the S1, which had a 2-liter 16-valve engine and 142 HP of power. But perhaps this car is best remembered for its stellar appearance as James Bond's car in the movie "The Spy Who Loved Me", where it had the ability to navigate underwater... turned into a submarine!

Kit with which to make the version of the Nissan Sunny / Pulsar GTI-R during its participation in the 1000 Lakes Rally in 1991. This reference includes new wheels and a complete front light pod.

Here you have one of the new Aoshima kits of the Nissan R35 GT-R Type 2 tuned by Liberty Walk, a beautiful car without any doubts. The model includes everything you need to assemble version 1 of type 2 of the car, such as rims made in two parts, fully detailed exhaust and underside, an interior incredibly dissected in depth, etc.

The Yamaha Vmax is a living myth, with more than 35 years on the market (it was launched in 1985), which is quite an outrage, although it has experienced different evolutions over time. Aoshima allows us to mount the 2007 version, with a stupendous reproduction of its 1,198 cc V-four engine with electric start.

Wing screw, widely used in all types of competition vehicles from the 50s, 60s and 70s, as well as some pre-war. Made in resin by 3D printing, they reproduce all the details with the usual quality of DECALCAS products, so you only have to paint and glue them on your scale model.

Quick disconnect coupler for hydraulic systems at 1/12 scale, like those used for draining oil on Moto GP bikes. Made in resin by means of 3D printing with the usual quality of DECALCAS products, so that you only have to paint and glue on your scale model. These scale quick disconnect coupler reproduce every detail of the original part, including the wire that secures the cap to the connector,

Spectacular decoration of the unit of the Nissan 240RS with which the Cypriot couple Terzian / Theofanous achieved third position in the rally of their country in 1986, valid for the European Rally Championship of that year. The tobacco logo decals are included.

Spectacular decoration for your Revell/Esci/Italeri BMW M1 kit at 1/24 scale of the unit with which Dieter Quester, 78 years old, along with Luca Ricciteli, won their category at the 24 Hours of Daytona Classic 2017. As a curiosity, the car was put up for sale immediately after the race.

Radically change the look of your Revell, Esci and Italeri BMW M1 kit with this set of 4 honeycomb rims. The rims are designed to be used with the kit's own tires. The 4 ventolins that were used to extract hot air from the brakes are included.

A myth, the Lamborghini Diablo appeared to replace the also legendary Lamborghini Countach. Fujimi's kit will allow you to recreate this supercar in detail, the engine being partially reproduced and being visible thanks to its tilting engine cover. And the same goes for the interior, with a system that will allow you to open the doors, with its curious "up" opening system, revealing its luxurious and sporty interior. What a joy!

This figure is designed to be able to be incorporated into the cockpit of the reference kit RS-004 of the McLaren MP4/4. The kit of the figure is made up of 15 resin parts, and includes a decal sheet for decorating the driver's outfit.