Newsletter 561: 312 F1April 5^th, 2023

This is a completely new project that required the creation of a new mold for the Firestone tires used in the 1969 season. This Ferrari was characterized by the aerodynamically shaped rear fairing radiator equipped with two side fins and the now classic “spaghetti” exhausts, that were made famous by these Ferraris from the late 1960s.

Set of 1/24 scale 3D printed JWB Superlight resin rims, designed to perfectly fit the Hasegawa Mini Cooper model kit. Adapters are also included to be able to use this set of rims on any Aoshima, Fujimi or Tamiya model. Be careful, tires not included! The images with the tires are for example only. The 13-inch tires, with reference USCP-13-1, can be purchased separately,

Perhaps one of the best known and most anticipated decorations for the Ford Sierra Cosworth 4x4 Group A. With it, Snijers achieved victory in the 1991 and 1992 editions of the Ypres 24 Hour Rally. Of course, you will have to choose if you prefer the 91 (number #6) or the 92 (number #1). Masks are included in the set to help correctly paint the curved areas of Bastos' red stripes. And if you want your model to look like the real car in every detail, don't forget the TecnoMagnesio rims, the standard exterior rearview mirrors and the roof vent covers.

Decal sheet to make the decoration of another of the powerful Sierra Cosworth 4x4s that participated in the Belgian Rally Championship, sponsored by Boxy's Jeans, and which won the Condroz Rally in 1992. The decals give the option of painting the bodywork yellow and place the blue decals on top, whose transparent areas allow the background yellow to be used for the logos, or to paint the blue parts and put decals with the logos in yellow over said areas. Easier can not be!

Set of four ATS rims with the design used by some versions of touring cars from the 2000s, such as the BMW 320i E46 participating in the German Production Car Championship (DMSB). The rims have an approximate diameter of 20mm and a width of 11mm, and are designed to be used with the Nunu kit tires.

Decal sheet to make the livery of another of the numerous Sierra Cosworth 4x4s that participated in the Belgian Rally Championship, sponsored in this case by the tobacco paper brand Rizla+, and which won the Omloop van Vlaanderen Rally in 1992. And to complete your model, don't forget the vents covers on the roof. A spectacular decoration!

The Portuguese driver José MIguel had no luck in the World Championship rally held in his country in its 1993 edition, since he had to abandon in the first section. Despite this, her victories in several rallies of the Portuguese Championship make her worthy of being one of the options for the D.Modelkits Sierra Cosworth 4x4 Group A kit. The set includes a small set of masks to help with the red painting of the fenders, both front and rear. And to complete your model, don't forget the vents covers on the roof.

Rothmans decor looks great on any car! It's a pity that its driver Dany Snobeck only used his Sierra Cosworth in two editions of the Rally du Var, in 1991 and 1992. Luckily, that hasn't been an impediment for LB Production to have found enough documentation to offer us the option of mounting this version with a complete decal sheet. And if you want your model to look like the real car in every detail, don't forget the TecnoMagnesio rims, the standard exterior rearview mirrors and the roof vent covers.

8 hours of racing, and seven cars fighting for victory and finishing on the same lap. Super exciting! And the final winner, the Audi R8 GT3 number #25 of the Audi Sport Sainteloc team, which thanks to the LB Production decal set you can now reproduce from the Nunu kit of the Audi R8 LMS Evo, just like the other two Audi from the WRT team with numbers #32 and #37 who finished in fifth and twelfth position respectively. You will have to choose which of the three to do, because each set of decals only allows you to complete one of the three versions.

Complete set of connectors for pipes and electrical wiring, with 5 strips with different designs, made by 3D printing. The different connectors come perforated on both sides, ready to be able to insert different types of cable without having to make any additional hole. Connectors from strip 2 can be inserted into each other, being like the male and female parts of the real connectors. Although they are valid for any scale, reference L is mainly designed to be used in 1/12 scale models.

Complete set of connectors for pipes and electrical wiring, with 4 strips with different designs, made by 3D printing. The different connectors come perforated on both sides, ready to be able to insert different types of cable without having to make any additional hole. Connectors from strip 2 can be inserted into each other, being like the male and female parts of the real connectors. Although they are valid for any scale, reference S is mainly designed to be used in 1/24 scale models.

For several years now, the Speedhunters website has been dedicated to making fantastic reports on all kinds of modified cars, which is why we can find their logo on a multitude of vehicles. Customize your models with these fantastic yellow Speedhunters decals.

Sheet of decals where the decals necessary to make the version of the Porsche 911 GT2 of the Kremer Repsol team participating in the 24 Hours of Le Mans in 1995 are combined, and twice to have spare parts (or share them), with the Honda RC30 with Joe Dunlop taking part in the famous Isle of Man TT race in 1988.

For several years now, the Speedhunters website has been dedicated to making fantastic reports on all kinds of modified cars, which is why we can find their logo on a multitude of vehicles. Customize your models with these fantastic black Speedhunters decals.

The Almeras brothers not only prepared many and varied Porsches, but also drove them on many occasions, as happened in the 1980 edition of the 24 hours of Le Mans. Reji has reproduced the decoration of this car, adding the corresponding rims and rear spoiler used in this version, which differ from the parts included in the Porsche 934 kit.

After its time in the World Rally Championship, the S6 versions of the Subaru Impreza WRC go to private teams, and participate in different national championships, such as the case of this version driven by Snijers in the Sezoens Rally in Belgium in the 2003 season. This Reji transkit includes all the changes made to the Impreza S6 from the year 2000, such as the air intakes on the hood, the front bumper or the roof, as well as the exhaust line, the front spoiler or the rear wing with a shape much more developed. Let yourself be captivated by this striking version!

The differences are small, and it takes a trained eye to spot them, but the Impreza WRCs have undergone small changes over the years. In the 2000 season, the air intakes on the hood, front bumper, or roof were modified compared to previous years. With this Reji Models transkit, which includes all these modifications and more, such as the exhaust line, the front spoiler or the rear wing with a much more developed shape, you will be able to reproduce in full detail the versions that raced in the rallies of Catalonia and San Remo 2000, with Richard Burns (number #3) as the starting driver in both rallies, accompanied by Kankkunen in Catalonia and Simon Jean-Joseph in San Remo in the team's second unit (number #4).

Set of rims and tires to convert the different variants of the Nunu / Beemax Audi Sport Quattro S1 kit into its gravel version. In addition to the resin rims and rubber tires, a set of brake discs with calipers adapted to the diameter of the rim is included.

Decal sheet to choose between 3 decorations of the BMW M3 E30 Group A used by Marc Duez in various events of the 1989 season, corresponding to the rallies of Portugal, where he finished fifth, the Tour de Corse where he finished sixth, and Ypres, where he got the second position.

Sheet of decals and complete plate of photo-etched parts to make the versions of the Nissan Sunny/Pulsar GTI-R used by the official Nissan team in the 1991 1000 Lakes Rally (numbers #11 and #15) and in the 1992 edition of the Rally Monte Carlo (numbers #8 and #12). In addition to the corresponding decals with all the logos to complete the exterior decoration, with the photoetched parts multiple elements of the interior and the mechanical part can be detailed, such as the steering wheel core, the sump guard, the passenger footrests, seat bases, hood latches, belt buckles. Very complete!

Within the successive evolutions of the Mitsubishi Lancer, in 2001 the version called Evo 6.5 was launched, recognizable by its new front bumper. Reji has reproduced the front bumper in resin to easily transform the Lancer Evo VI Tamiya kit into the versions used in the 2001 World Rally Championship. And if you prefer the street model, this bumper is the one needed to make the "Tommi Makinen edition" version.

Decal sheet to make any of the two participating units framed within the official Ford team in the 1992 Monte-Carlo Rally. The set of decals is not complete, that is, some of the decals from the kit corresponding to the Rally de Portugal version must be used (reference DM-K002). And remember, Delecour carried the Carglass advertisement and Biasion that of Autoglass...

Decal sheet to make any of the two participating units framed within the official Ford team in the 1992 Tour de Corse, where Francois Delecour obtained second place. The set of decals is not complete, that is, some of the decals from the kit corresponding to the Rally de Portugal version must be used (reference DM-K002). And remember, Delecour carried the Carglass advertisement and Biasion that of Autoglass...

Set of four 5-bolt TecnoMagnesio rims with slick tyres, designed to be used with the Beemax kits of the BMW M3 Group A rally version and with the Hasegawa Subaru Legacy Group A kits, where it will be necessary to modify the suspension heights for its asphalt configuration. What color are you going to paint them in, white or gold?

Set of four Enkei wheels designed for the Nissan 240 RS in its asphalt configuration, like those used in rallies such as Montecarlo or Córcega, or even in the Marlboro version of the El Corte Inglés rally. Four low-profile, treaded rubber tires are included.

Set of four-bolt TecnoMagnesio rims, to be used with the tires of the Ford Sierra Cosworth 4x4 Group A kit from D.Modelkits. Vents for the front rims are included, which helped extract hot air from the brakes, and which were prohibited from the 1993 season as they were considered mobile aerodynamic elements.

If we were to ask about the most famous races in the history of Formula 1, surely the 1976 Japanese Grand Prix would be among the most mentioned, undoubtedly helped by the film Rush focused on the rivalry between Lauda and Hunt. In that race, marked by heavy rain, the famous six-wheeled Tyrrell P34 also participated, a version recently reissued by Tamiya, which comes only with slick tires. For those who want to complete their kit as it ran in the Fuji race, Falcon have developed a detailed set of front and rear rain tires to replace those supplied on the Tamiya kit. The rain will no longer be a problem!

Detailed chain printed with 3D technology for the Tamiya model kit of the Bimota Tesi 1D 906 SR. Kit contains chain with sprockets.

Detailed chain printed with 3D technology for the Tamiya model kit of the Suzuki GSX750S new KATANA. Kit contains chain with sprockets.

Detailed chain printed with 3D technology for different versions of the Tamiya kits of the Suzuki GSX, such as the references of the 750S Katana, 750 Police and 1100S Katana.

Detailed chain printed with 3D technology for the Tamiya kit of the Suzuki RG250 in its different versions.

Detailed chain printed with 3D technology for the Tamiya kit of the Honda RC166 GP Racer 250cc.

Detailed chain printed with 3D technology for the Tamiya model of the Ducati 888 Superbike of the Police team.

For several years now, the Speedhunters website has been dedicated to making fantastic reports on all kinds of modified cars, which is why we can find their logo on a multitude of vehicles. Customize your models with these fantastic gray Speedhunters decals.

For several years now, the Speedhunters website has been dedicated to making fantastic reports on all kinds of modified cars, which is why we can find their logo on a multitude of vehicles. Customize your models with these fantastic Speedhunters SH decals in black with a white frame, or just black so you can take advantage of the background color of the body.

For several years now, the Speedhunters website has been dedicated to making fantastic reports on all kinds of modified cars, which is why we can find their logo on a multitude of vehicles. Customize your models with these fantastic Speedhunters SH decals in white with a black frame, or just in white so you can take advantage of the background color of the body.