Newsletter 557: On the snow

Beautiful decoration used by Thierry Neuville in the Eifel Festival Rally held in Germany, an event outside his participation in the World Championship as an official Hyundai driver, available to be build thanks to this decal set from LB Production, and using the Peugeot 306 Maxi Evo 2 kit from Beemax as base.

In 2019 the shinning 2018 world champion arrived at the Citroën team, achieving some victories, although it was not possible to revalidate the title. This decal sheet allows you to make the versions of both team drivers during their participation in the Corsica Rally, where Ogier finished second, and in Turkey, where the Citroën team achieved a fantastic one-two victory, with Ogier winning. Red chrome decals for one of the team's main sponsors are included. It is also possible to download the template to make the masks that will allow you to paint the body perfectly.

Complete rear wing with its corresponding supports, 3D printed with ultra-high resolution resin, to transform the Audi R8 LMS scale kit to 2022 Evo II specification.

Complete decal sheet to make the winning WRT team version among the 19 participants of the Silver Cup category within the 24 hours of Spa 2022. The same vehicle also participated in the GT World Challenge Europe. both in the Endurance Cup and in the Sprint Cup series, with small differences in the placement of decals and logos depending on the version to be made. For a perfect result, it is important to paint the bodywork following the different steps specified in the decal placement instructions. It is also advisable to get the correct rear wing assembly, reference LBTK08.

Complete decal sheet to make the version of the number #31 of the WRT team participating in the Silver Cup category within the 24 hours of Spa in 2022. The same vehicle also participated in the Endurance Cup of the GT World Challenge Europe, presenting small differences in the placement of decals and logos depending on the version to be made. For a perfect result, it is important to paint the bodywork following the different steps specified in the decal placement instructions. It is also advisable to get the correct rear wing assembly, reference LBTK08.

Complete decal sheet to make the version of the number #32 of the WRT team participating in the Pro category within the 24 hours of Spa in 2022. The same vehicle also participated in the Endurance Cup of the GT World Challenge Europe, presenting small differences in the placement of decals and logos depending on the version to be made. For a perfect result, it is important to paint the bodywork following the different steps specified in the decal placement instructions. It is also advisable to get the correct rear wing assembly, reference LBTK08.

Complete decal sheet to make the version of the WRT team with number #33 that obtained the second position among the participants of the Gold Cup category within the 24 hours of Spa in 2022. The same vehicle also participated in the GT World Challenge Europe . both in the Endurance Cup and in the Sprint Cup series, with differences in the placement of decals and sponsors depending on the version to be made. For a perfect result, it is important to paint the bodywork following the different steps specified in the decal placement instructions. It is also advisable to get the correct rear wing assembly, reference LBTK08.

Nothing better than race conditions to test new compounds, and that was precisely what Pirelli decided to do to continue developing the tires that the WRCs were going to equip in 2021. To do this, they put Petter Solberg in the same car as the main driver in charge of the tests, which he served as co-driver, allowing his participation in the Power Stage section in the 2020 Sardinia Rally, leaving just before the rest of the rally participants. This curious decoration completely in black with the Pirelli logos in a striking yellow color is now available thanks to LB Production. The decals of the carbon fiber parts are not included.

It is always curious to see the special decorations with which sponsors and teams sometimes delight us in GT championships, such as the one used by the Uno Racing team in the races of the Macau GT event, with a striking multicolor Audi R8 GT3 with drawings from Hello Kitty, shining in the second race with a competitive sixth place. A decoration that, as happened on the grid, will undoubtedly attract attention. It is also advisable to get the correct rear wing assembly, reference LBTK08.

Decal sheet to make the version of one of the two Car Collection Motorsport team cars participating in the ADAC GT Master, which in 2022 has merged with what was previously the DTM. The mentions in the decoration of the car to the surname Verstappen are due to the fact that one of the drivers of the car is the son of the representative of Max Verstappen himself, being his first season in the championship. Curious fact for a spectacular decoration.

Decoration to make any of the two versions of the Opel Manta participating in the 1985 Hong Kong - Beijing Rally, in which Ermin Weber got the last step of the podium. Tobacco logos are included on the decal sheet.

No less than 10 Mazda RX-7 units were present at the start of the 1982 Bathurst 1000Km, with an outstanding performance, the unit driven by Moffat and Katayama with the number #43 being the best classified in sixth position. which improved substantially in the 1983 edition, where they achieved second position. This is the decoration chosen by LB Production as an alternative for the Mazda SA22C Hasegawa kit of the 24 hours of Daytona.

Do you know what year the Ghostbusters movie was released? This decoration used by one of the Mazda Savanna RX-7 in the 1984 Bathurst 1000Km has the solution, since on its body it carried the sponsorship of the film itself, with the famous logos of the ghost inside a forbidden sign. Therefore, the solution is 1984. Oh, and we love the decoration!

One of those decorations that powerfully attracts attention, with all those spring/shock absorber assemblies in striking colors distributed throughout the body. A decal sheet that is valid for both Tamiya and Hasegawa Toyota Celica ST185 Group A kits.

Decal sheet to make either of the two Schubert Motorsports team cars that dominated the 2004 German Production Championship (DMSB) season, with Claudia Hürtgen as the final champion ahead of her teammate. A striking decoration in the typical colors of the Hasseröder brewery.

Various decorations have been used to promote and "save" the mythical Nürburgring circuit, including the message "Save the Ring" as another sponsor on the car body. One of these striking decorations with the body decorated with the drawing of the circuit was used by the Schubert Motorsport team in its participation in the VLN series held precisely in said circuit, giving rise thanks to LB Production to a spectacular decal sheet. Are you joining the "save the ring" movement?

Decal sheet to make the version of the Toyota Supra GT500 that, under the colors of the FET Sport team, participated in the 1995 JGTC Championship, obtaining fourth place as the best position in the fourth race of the championship held at the Fuji circuit. The decal sheet corresponds to the version of the first race, the 300 km of Suzuka.

Set of four BBS rims with the design used by some versions of touring cars from the 2000s, such as the BMW 320i E46 participating in the VLN series at the Nürburgring. The rims have an approximate diameter of 20mm and a width of 11mm, and are designed to be used with the Nunu kit tires. Decals with the BBS logos are included.

Set of four rims with the design used in various competition versions of the 80s, such as the Mazda RX-7 Savanna SA22C. The rims are designed to be used with the Hasegawa kit tires, and have a greater width for the rear tires.

Set of four Speedline rims with gravel tires, originally designed to be used in Belkits models of the Opel Manta, although the stem anchoring to the kit allows it to be used in other kits with this type of wheel fastening.

Set of five Speedline rims with the design used by many models in the Kit Car category, such as the Peugeot 306 Maxi kit car. The rims are designed to be used with the Nunu/Beemax kit tires,

With an almost perfect pattern, this decal is perfect for small details in 1/12 scale cars and bikes, race cars in 1/20 scale, and mainly for modern sport and rally cars in 1/24 scale. Remember that, in order to improve the final result, you must paint the surface black before placing the decal.

What's the problem with your FW16 decals? Are they incomplete? Is the Rothmans logo missing? Are they just wrong?

Complete decal sheet with all sponsors used during the 1998 season by the McLaren MP4/13, including tobacco sponsors. Perfect to renew and complete the decals of your Tamiya kit.

Detailed chain printed with 3D technology for the Tamiya model kit of the 2004 Yamaha YZR M1.

Steering damper made by 3D printing to mount on the 2004 versions of the Yamaha YZR M1 Tamiya kits,

Detailed chain printed with 3D technology for the Tamiya model kit of the Yamaha YZR500.

Detailed set of front and rear shock absorbers to replace the ones supplied in the Tamiya kit. Each shock comes with all its elements separately: upper and lower sections, damper rod and spring. Thanks to this, it is very easy to paint, and above all, once assembled, a much more realistic appearance is achieved. The set comes with parts to make a total of 5 front (1 spare) and 3 rear (1 spare) shock absorbers.

Set of parts to replace the intake trumpets supplied by Tamiya in the Tyrrell kit. Includes 10 intake trumpets (5 for the left side and 5 for the right side), 10 upper grilles, and a transparent tube to recreate the gasoline feed pipes.

The kit includes more than 600 parts of different materials, as diverse as metal, rubber, cloth and first quality plastic. It belongs to a limited edition so it will be available for a short time. Do not miss yours!!

In recent years, we have become accustomed to the pink versions of the cars sponsored by BWT, very present in different top-level championships. So that you can make such striking versions, Number Five has formulated the pink color tone similar to that used in the vehicles sponsored by BWT.

Have you noticed that in many of the cars sponsored by BWT, apart from the characteristic pink tone, there are some bands and areas painted in a darker tone? So that you can paint all those areas, Number Five has formulated the magenta color tone similar to the one used on the cars sponsored by BWT.

Yellow tone used in the different vehicles used in the 18 editions of the famous Camel Trophy event, held between 1981 and 1998, such as the Land Rover Defender, Discovery or Range Rover, among others.

Light beige color tone commonly used in different models and versions of the Land Rover range. It has been specifically formulated for the Revell and Italeri scale kits.