Newsletter 544: Tambay

Complete detailing set for your Audi A4 Quattro kit, where in addition to the photo-etched plate, you will find the turned metal antenna base, the fabric for the harnesses and a decal sheet with carbon fiber patterns.

Set of 4 rims with separate outer ring, core and central nut. The outer ring made of turned aluminum has an outer diameter of approximately 21.5 mm. The core of the rim is made in 3D printing, while the central nut is made of turned metal. Important: TIRES NOT INCLUDED.

Set of 4 rims to be used in the Nunu/Beemax kit of the Audi Quattro S1 E2, with the design seen in some rallies such as Monte Carlo. Each of the rims is divided into three parts, the outer ring, the central core and the hub, which includes the rim nuts. The rims have an outer diameter of approximately 19mm, and can be used with the tires from the kit.

The diameter of the outer ring of the rim is approximately 21.5 mm. Important: the set of rims comes without tires.

If you are one of those who prefer to use the exact color, you are in luck. Number Five has prepared the same formulation used by Wolf Racing to paint their Formula 1 machines.

The green color tone you need to paint your Brabham BT18 kit. It also applies to other Brabham cars from the 1960s.

Number Five has prepared the yellow color tone used in the competition vehicles sponsored by Mann Filter, as seen in recent years in some GT competitions, for example.

What a great idea! Using the two neodymium magnets included in the set, the steering wheel can be detached from the steering column and placed on a hook as on many of the real cars.

Set of 4 wheels, rims and brakes, to convert the Ford Fiesta WRC 2017 scale model manufactured by Belkits to the tarmac version. This set includes perfectly sized rims and tires with full thread and asymmetric design, and air valves are also included in the set. Wheels can be rotated and rims can be fitted onto the hub using the provided micro-magnets.

With this tool you can replace the suspensions of your models by doing the springs yourself. Use the tool to twist a copper wire from 0.3 to 0.5mm, and use it on the supplied suspension parts, which are designed to be long enough to meet all kinds of needs. Simply cut down to size, paint, and assemble. The cooper wire is not included in the product.

Complete set of wheels and suspensions to transform Hasegawa model of the legendary Subaru Legacy Gr.A into its asphalt version, with its precious Tecnomagnesio rims. The set includes: 4 rims, 4 tires (2 front and 2 rear identified by their rear), 2 front suspensions, 2 rear suspensions, and 4 hubs that integrate the wheel nuts and the central nut of the transmissions.

Set of 17" Speedline rims with the design used by many Lancia Delta HF Integrale Gr.A, such as the official Repsol during the 1993 season. As a specific feature of its design, the outer cooling holes of the rim are rectangular, which sets it apart from the similar rim used in 1992. Two cooling vents for the front wheels are included in the set, which is ideal for combining with the KMP-TK24152 tarmac conversion kit.

Set to detail and improve the appearance of the rear part of the Esci, Italieri or Revell models of the Fiat 131 Abarth at 1/24 scale, with a new rear panel that includes the triangular rear lights with the internal relief of the optics and the license plate lights. The arrangement of the transparent optics, separated from each other, simplifies painting, and the guide rods simulate the anchoring screws of the rear lights. What details!

A true giant killer. This is one of the most famous vehicles intended for hill climbs, the Fiat 500 gr2, with the wider wings, the anti-roll bar, the tires with a larger groove to increase the width of the tracks and the modified engine. This transkit is specifically designed to replicate one of the Fiat 650NP Giannini, of which several copies can be found, with their corresponding decorations and small differences. The transkit allows you to make a "standard" version, which serves as a base whether you want to make a classic version or some of the most modern ones that are still in use today. The transkit is designed to be used with the Fiat 500F and Fiat 695SS Tamiya kits which include an engine, on which the transformation parts of the TK are used. If you want to use the Gunze model as a base, the complete engine for the Fiat 650 NP can be purchased separately. The decals included in the transkit allow you to make the version you see in the photos.

Set of OZ flat type rims suitable for your Toyota Celica ST185 tarmac builds, taking as a base the 1/24 Tamiya kit. This rims were mainly used in the 1992 session, when Carloz Sainz becomes world champion for second time. The set comes with five units, so spare wheel for the car's interior is included.

Set of OZ flat rims suitable for your assemblies of the asphalt versions of your model of the Deltona, using the Hasegawa 1/24 scale model as a base. This set reproduces the 17-inch wheels with slick tires used from the 1993 season onwards. Does not include ventolins as they were banned in that 1993 season. This set of rims is perfect for Esso Grifone, Marlboro and many other team liveries from the 1993 season and later.

Set of 8-arm Speedline rims with gravel tires for your Nunu model of the Peugeot 306 Maxi. Although its greatest successes were always on asphalt, different examples of this car can be found competing in gravel rallies, such as that of the Portuguese driver Adruzilo Lopes in the Rally de Portugal from the 1996 to 1999 season. For those versions, KMP has created this set with the correct hubs for a perfect coupling to your model, including five complete wheels. Each rim measures 26.5mm in total diameter and 8.5mm in tire width.

Set of five OZ rims with gravel tires designed for your assemblies of the gravel rally versions of the 1/24 scale kit of Hasegawa's Lancia Delta Gr.A.

Set of OZ flat rims designed for your builds of many of the tarmac versions of your Hasegawa 1/24 scale kit of the Mitsubishi Galant VR4 Gr.A. This set reproduces the 17-inch rims with slick tires, and includes ventolins for the front wheels, with small neodymium magnets that allow, if desired, to remove them or put them on the rims.

Set of 4 rims and slick tires to convert the Tamiya Audi Quattro Gr.4 model into its asphalt version. The set includes four brake discs and their corresponding calipers. It can also be used with the Italeri / Revell model, although it is necessary to make some adjustments for its anchorage, since they are not the same molds.

Set of OZ flat rims suitable for your assemblies of asphalt versions of your Lancia Delta HF Integrale 16V, based on the Hasegawa 1/24 scale kit. This set reproduces the 16-inch wheels with slick tires, and includes a pair of ventolins for the front wheels. This set is suitable for decorations sponsored by Fina and other Lancia Deltas of the same year.

A set of 6 classic door handles and 6 "T" shaped toolbox handles cast in resin.

Impressive kit where parts made of various materials are combined, such as white metal, resin, photo-etched parts, turned metal parts, rubber tires... and with great detail, such as the rims to be assembled spoke by spoke. All the exquisitely detailed mechanical part is accessible once assembled.

Add maximum detail to your racecars, custom builds, and bikes with this pack of Bosch MS7.4 ECUs. This ECU is the premiere ECU for all your engine management needs. Pop it in your F1 racecar or write some custom code for that crazy swap….wait this is scale! These scaled versions allow you to create a detailed engine bay or driver’s footwell, for the truly detail obsessed. These Bosch MS7.4 ECUs are 3D printed using an SLA process for maximum detail.

Add maximum detail to your racecars, custom builds, and bikes with this pack of Bosch MS7.4 ECUs. This ECU is the premiere ECU for all your engine management needs. Pop it in your F1 racecar or write some custom code for that crazy swap….wait this is scale! These scaled versions allow you to create a detailed engine bay or driver’s footwell, for the truly detail obsessed. These Bosch MS7.4 ECUs are 3D printed using an SLA process for maximum detail.

Add maximum detail to your racecars, custom builds, and bikes with this pack of Bosch MS7.4 ECUs. This ECU is the premiere ECU for all your engine management needs. Pop it in your F1 racecar or write some custom code for that crazy swap….wait this is scale! These scaled versions allow you to create a detailed engine bay or driver’s footwell, for the truly detail obsessed. These Bosch MS7.4 ECUs are 3D printed using an SLA process for maximum detail.

AS series Deutsch electrical connector set 3D printed using SLA process for maximum detail. Includes two trays, each with 203 connectors for a total of 406 connectors per package. The kit includes sizes 24 through 7, both bulkhead mounted and inline.

AS series Deutsch electrical connector set 3D printed using SLA process for maximum detail. Includes two trays, each with 203 connectors for a total of 406 connectors per package. The kit includes sizes 24 through 7, both bulkhead mounted and inline.

AS series Deutsch electrical connector set 3D printed using SLA process for maximum detail. Includes two trays, each with 203 connectors for a total of 406 connectors per package. The kit includes sizes 24 through 7, both bulkhead mounted and inline.

Bibliographical and reference book of the Lancia Stratos Group 5, in Italian and English languages, and which includes 400 pages, more than 200 photographs, 100 illustrations, and a lot of information about what is one of the most fantastic Italian competition cars in the world. all the times.

Bibliographic and photographic reference book about the Lancia Delta S4, in Italian and English language, including 112 pages, more than 100 photographs, 150 illustrations, and a lot of information about what is one of the most fantastic rally cars of all time.

Decal sheet to make the decoration used by the Ecurie Ecosse team during its participation in the 5 events of the 2013 European Le Mans Series (ELMS), obtaining the best result of tenth place in the first event, the 3 Hours of Silverstone.

Decal sheet to make the decoration used by the Ecurie Ecosse team, which for the 2014 season decided to participate in the 5 events of the Blancpain Endurance Series. The specific version is the one used by the team in the first of the events, the 4 Hours of Monza, where they finished in twelfth position.

Decal set to make the decoration used by the TDS Racing team during its participation in the 5 events of the 2014 Blancpain Endurance Series, with a striking and spectacular combination of colors so that your Fujimi model of the BMW Z4 GT3 look like never before. The set includes a second sheet of decals (not shown in the images) with, among others, the logos for the tires, the BMW emblems, the third number and the decal for the red zone on the rear bumper,

Decal sheet to make the livery used by the Roal Motorsport team during its participation in the 5 events of the 2014 Blancpain Endurance Series. The specific version is the one used by the team in the first event, the 4 Hours of Monza, where they finished in sixth position.

Decal sheet to make the decoration used by the Triple 8 team in their participation in the 3 Hours of Silverstone race, the second event of the 2014 Blancpain Endurance Series, where they failed to finish the race, leaving prematurely.