Newsletter 537: KreidlerOctober 20^th, 2022

Another excellent resin kit from Brach Model, with its fantastic perfectly crafted parts that we all love in this brand. This kit recreates the Kreidler Van Veen 50cc that the 12+1 times World Champion Angel Nieto rode in 1975, achieving the 50cc World Championship with six wins and two second places in 8 races. The kit has such a wealth of details that its assembly is the closest thing to built a real motorcycle. Without a doubt, a kit that will not disappoint you!

Very useful tool to use with paint bottles. With its spoon-shaped end you can comfortably stir the contents of the paint jars, and with the flat end you can pour the paint into the airbrush bowl in a controlled manner.

These sponges are designed to apply Tamiya polishes for a shiny, lustrous finish. The central section, in blue, is more rigid so that you have a better grip on the sponge. The white area at both ends is smooth so as not to damage the surface of your models. 3 sizes are included. We recommend that you wash the sponges with a little detergent after each use to remove any polish residue.

Transparent showcase with black base. The exterior measurements are 299 x 145 x 106 mm and the interior measurements are 287 x 132 x 93 mm. It has been designed by Tamiya so that you can accommodate your 1/20 scale model cars.

Transparent showcase with black base. The exterior measurements are 260 x 144 x 145 mm and the interior measurements are 247 x 133 x 132 mm. It has been designed by Tamiya so that you can accommodate your 1/12 scale model motorcycles.

ScaleLab 24 presents us with a second, easier option from its upgrade set for the Tamiya Sauber Mercedes C9, for those modellers who prefer to focus primarily on the external appearance of the model. Of course, the details are still brilliant, with improvements to the brakes, rear wing supports and their lateral planes, templates to paint the tire marks, buckles for the harnesses... and speaking of harnesses, the fabric is also included to manufacture them.

Even more complete! This is the detail set that ScaleLab24 has prepared for Nunu's new Audi R8 LMS reference, the EVO version that differs from its predecessor, the Audi R8 LMS. An extra plate of photo-etched parts to reach up to 4 to improve and detail your model, including complete perforated brake discs, grilles for the air intakes, fins for the diffusers, rear wing supports, the digital number used to indicate the position in race, the rider's interior protection nets, the windshield wipers, etc. And in addition, the interior and exterior masks are included for painting the windows, the calipers for the resin brake discs, the fabric for mounting the harnesses, some turned metal parts.... little more can be lack!

Decal sheet to complete the decoration of the Audi R8 LMS Evo GT3 as it participated in the fourth round of the Japanese Super GT championship held at the Motegi circuit, included in the GT300 category.

Decal sheet to complete any of the three units used by the Abt Sportsline team in its participation in the 1998 STW. One of the most striking decorations on the entire grid, and with renowned drivers, although the results were not as expected. The best position of the season was the second place achieved by Emanuele Pirro in the second race of the event held at the Salzburgring circuit.

In the 1999 season, the Abt Sportsline team repeated with very striking decorations, but changing sponsor, which became the Hasseröder beer brand. An immaculate start to the season, with four wins from the first four races, saw Christian Abt clinch the championship after a fierce battle with Uwe Alzen's Opel Vectra.

Two decorations in one, for the races that marked the end of both seasons. In 1995 the World Cup was held, a race where the best drivers from each of the national Supertouring championships were invited. In it, Fran Biela was proclaimed the absolute winner after winning one of the races and finishing second in the other. In 1996, as has been customary for years, the Macau street circuit event was held, where Biela also won, confirming himself as one of the best specialists of the time. On both occasions, Biela used an Audi A4 Quattro with the official decoration with the four side rings, and that SK Decals has designed in such detail.

Not even a week has passed since the Tamiya model of the Ducati Superleggera V4 arrived, and we already have the first references to detail it even more. In this set you will find the chain printed in detail with the gaps between links, already pre-cut and ready to paint, which is accompanied by the mesh that we find at the ends of the two exhaust outlets.

Second of the references available to increase the detail and finish of the new Tamiya scale model of the Ducati Superleggera V4, where the clutch assembly is highly visible. This set contains, printed with 3D technology, the disc pack, the clutch support housing and the outer cover. which also makes it easier to paint. Spectacular!

Detailed 3D printed chain for Tamiya's model kit of the Yamaha YZR-RM1, Yamaha's super sports bike.

Spectacular set of four five-bolt Ferrada rims with two sets of separate adapter hubs to be used with different model manufacturers, and with a decal sheet to decorate the center cap of the hub. The rims are printed in two pieces, with separate rim and core, and come without tires. Each of the rims has a diameter of about 20.6 mm and a width of about 14 mm.

The WEC (World Endurance Championship) Hypercar category is in fashion, and Peugeot could not miss it. In preparation for its full assault in 2023, Peugeot decided to measure itself on the track with its future rivals, making its debut in the 2022 Monza 6 Hours race. This scale model is precisely inspired by the Peugeot prototype, although it is not exactly identical to the actual model. All parts are 3D printed, except for the floor, machined from metal, and the transparent parts, made from lexan. This product does NOT include decals, which can be purchased at Decaldoc: Peugeot 9x8 decals

What a joy to have Porsche back in the WEC, and to publicly debut its new prototype, the 963 LMDh (a clear allusion to the legendary Porsche 962), what better place than the Goodwood Festival of Speed. This is precisely the vehicle that has inspired the forms of this model, since it is not exactly identical to the real model. Most of the parts are 3D printed, except for the floor, which is machined from metal, and the transparent parts made from lexan. This product does NOT include decals.

Batteries used in competition are slightly different from those used in street vehicles, as they seek to weigh as little as possible and take up as little space as possible. For those who need a battery of these characteristics in the detailing of their kits, this compact battery printed with 3D technology meets all the requirements.

This 3D printed hydraulic handbrake includes, in addition to the vertical actuation lever, the anchoring base to the bodywork, the pump bellows and the pump itself with its connection for the brake pipe and the fluid reservoir, What great definition and detail!

Set of 4 different types of 3D printed foam air filters, featuring the most common designs used in engine builds.

3D printed small size oil cooler. It incorporates the oil inlet and outlet connections at the top of the cooler.

Large size 3D printed oil radiator. It incorporates the oil inlet and outlet connections at the top of the cooler.

Have you ever had the feeling while detailing the engine bay of a road car that you are always missing the same parts? For us, yes, and that is why the appearance of two of these parts, a cooling system expansion tank and a brake booster assembly with pump and tank, have seemed a success, printed with 3D technology and with great detail.

Wheel pin adapter set to easily convert Aoshima rim models to be mounted on Tamiya and Beemax kits.

Wheel pin adapter set to easily convert StreetBlisters rim models to be mounted on Tamiya and Beemax kits.

Do you want to equip your model with good audio equipment? You will need several speakers, a subwoofer and an audio unit, and with these 3D printed parts you will have no problem incorporating them.

Single plane rear spoiler for GT vehicles, with two types of supports to be able to position the spoiler at different heights.

Single plane rear wing for GT vehicles, with three types of narrow brackets to be able to position the wing at different heights and distances from the bodywork.

3 different types of towing hooks/eyes mounted on racing cars for removal by crane in the event of an incident. 3D printed,

3 different types of 3D printed tachometers or dashboards with decal sheet.

Set of two 3D printed turbochargers, with the turbine and compressor shell parts printed separately.

When preparing a turbocharged engine, it is almost mandatory to also improve the intercooler, an element responsible for cooling the intake air before it is introduced into the engine. If your model needs to mount this component as well, this 3D printed intercooler can come in handy. The intercooler measures 25 x 9,8mm.

Set of LED light bars with different lengths, plus two hexagonal auxiliary headlights that would be mounted as corner holders. The corresponding light bar supports and the transparent resin strips are included. Due to their size, they are ideal for off-road models, or for assistance vehicles used to rescue other vehicles.

It is becoming more and more common to incorporate some decorative elements into our montages that enrich the scenes, and since we like vehicles with engines and gears, why not incorporate some of these 3D printed containers and containers, where the oils, refrigerants and cleaning products, necessary for the correct maintenance of our vehicle, would normally be?

For the workshop, to put in a delivery cart, to place next to a goods van, to place in the back of a pickup... there are many scenes where it occurs to us that these storage boxes printed with everything detail with 3D technology could be ideal. What do you also think of many others?

Set of four four-bolt rims with separate adapter hub and decal sheet to decorate the center hub cap. The rims come without tires. Each of the rims has an approximate wide of 10.65 mm.

Set of four classic five-bolt sheet metal rims. The rims come without tires. Each of the rims has an approximate wide of 11.2 mm.

Set of four Enkei 5-bolt rims with two separate adapter hub sets for use with different kit manufacturers, and a decal sheet to decorate the hub center cap. The rims come without tires. Each of the rims is approximately 20.6 mm in diameter and 12 mm wide.

Car manufacturers are putting all the meat on the grill with their electric vehicles, with increasingly exclusive, striking and passionate products. Revell has decided to reproduce, within its "Easy Click" series, one of the latest models to hit the market, the Audi e-Tron GT. A model with a great detail of the interior and a neat bodywork.