Newsletter 525: Non-stop

Non-stop

Non-stop
We recently told you about the Fuengirola Scale Modeling Contest, a couple of weeks ago they raced the 24 Hours of Le Mans, last week the Safari Rally was held and in the United Kingdom the Goodwood Festival of Speed, this weekend is celebrated the Le Mans Classic in France and the Formula 1 Grand Prix at Silverstone. What a joy! We love that normality returns to our lives, and that races, model competitions and all those adventures that we all love so much are finally back.

The bad news is that so many events translates into the fact that manufacturers must also manage a well-loaded agenda, and so the number of new products that come to light decreases, which is even appreciated here to let us catch a break and concentrate on the workbench to push forward our already started projects.

Among the novelties that we bring you we want to highlight the two punctual reissues that Studio27 has made of the carbon fiber patterns for the Yamaha YZF-R1M and the Honda CBR1000RR-R Fireblade SP by Tamiya in 1/12 scale, since they are unit limited reeditions and will be available for a very short time.

SpotModel recommends: enjoy each and every one of life's little pleasures, including building models of course ;D

GPmodeling: Detail up set 1/24 scale - Lancia 037 Rally Evo II - 3D printed parts and water slide decals - for Hasegawa references 20264, 20277, 20299, 20399, 20414, 20447, 20485, 20523, 20566, 25030, CR-30, 25030.OUTLET, 52305, SP505, HACR30, 25030 and CR-30

Reference: A037EVO2

That last! We were speechless when we heard about this detailing set to use on Hasegawa's Lancia 037 kit. It includes all the parts to recreate the front compartment of the car, including the suspensions, the steering, the fluid tanks, the spare wheel, the brake discs and the calipers, the radiator with the electric fan... and on top of that with four complete rims that fit with the new wheel hubs, and with those of the rear discs included in the rear engine reference of the same manufacturer. Now you won't be able to resist going further with the scale model of this fantastic car.
Click here for more details

Italeri: Model car kit 1/24 scale - Land Rover 4 wheel drive 109'' LWB - plastic parts, rubber parts, water slide decals and assembly instructions

Reference: 3665

A true classic, and with off-road capabilities that are difficult to match, even for today's most modern vehicles. This is the Land Rover 109, reproduced in this case by Italieri in its long-wheelbase pick-up version with canvas cover, and with the spare wheel on the hood. Without a doubt, it will give rise to many jobs where rust, mud and rocky terrain are the protagonists.
Click here for more details

Model Factory Hiro: Model car kit 1/12 scale - Porsche 917K Automotive Engineering Team sponsored by Gulf #1, 2 - Joseph 'Jo' Siffert + Brian Redman, Pedro Rodriguez + Leo Kinnunen - 24 Hours of Daytona 1970 - photo-etched parts, resin parts, rubber parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts, assembly instructions and painting instructions

Reference: MFH-K511

Scale kit based on the Porsche 917K used by the Automotive Engineering team during the 1970 24 Hours of Daytona, where both team cars achieved the one-two finish. A complete and detailed model that includes white metal and resin parts, photo-etched, vacuum-formed parts, turned metal parts, rubber tires, decals, etc. Once assembled, the model allows you to remove the front and rear hoods, as well as the doors, revealing the complete interior and mechanical parts.
Click here for more details

Model Factory Hiro: Model car kit 1/12 scale - Porsche 917K Automotive Engineering Team sponsored by Gulf #20, 21 - Joseph 'Jo' Siffert + Brian Redman, Pedro Rodriguez + Leo Kinnunen - 24 Hours Le Mans 1970 - photo-etched parts, resin parts, rubber parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts, assembly instructions and painting instructions

Reference: MFH-K512

Model kit based on the Porsche 917K used by the Automotive Engineering team during the 1970 Le Mans 24 Hours, with a wider rear hood compared to the one used that same year at Daytona. Neither of the two team cars made it to the finish line. A complete and detailed model that includes white metal and resin parts, photo-etched, vacuum-formed parts, turned metal parts, rubber tires, decals, etc. Once assembled, the model allows you to remove the front and rear hoods, as well as the doors, revealing the complete interior and mechanical parts.
Click here for more details

Model Factory Hiro: Model car kit 1/43 scale - Lancia Delta S4 Martini International Racing Team #4 - Henri Toivonen + Sergio Cresto - Tour de Corse 1986 - metal parts, photo-etched parts, resin parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts, other materials, assembly instructions and painting instructions

Reference: MFH-K813

After their bigger brothers at 1/12 and 1/24 scale, finally the 1/43 Lancia Delta S4 version from MFH is available. The front and rear hoods have been designed to be removable after completion to show full view of the detailed interior and the mechanical parts, and between other details, the tires come with the pre-painted tire brand. It is not possible to have more details in so little space!
Click here for more details

Model Factory Hiro: Model car kit 1/43 scale - Lancia Delta S4 Martini International Racing Team #7 - Henri Toivonen + Sergio Cresto - Monte Carlo Rally - Rallye Automobile de Monte-Carlo 1986 - metal parts, photo-etched parts, resin parts, rubber parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts, other materials, assembly instructions and painting instructions

Reference: MFH-K812

After their bigger brothers at 1/12 and 1/24 scale, finally the 1/43 Lancia Delta S4 version from MFH is available. The front and rear hoods have been designed to be removable after completion to show full view of the detailed interior and the mechanical parts, and between other details, the tires come with the pre-painted tire brand. It is not possible to have more details in so little space!
Click here for more details

Model Factory Hiro: Model bike kit 1/9 scale - BSA Blue Star 350 1933 - CNC metal parts, metal parts, photo-etched parts, resin parts, rubber parts, turned metal parts, water slide decals, white metal parts, other materials, assembly instructions and painting instructions

Reference: MFH-K814

348 cc engine, 18 hp, high compression pistons, high lift cams and carburetor with accelerator pumps... the BSA Blue Star versions, although they were externally identical except for the color range, had a level of much higher performance than conventional models. A very desired motorcycle in its time, which will be equally desired in this very complete model that MFH brings us.
Click here for more details

Model Factory Hiro: Reference / walkaround book - JOE HONDA Sportscar Spectacles by Hiro: Sport Prototypes - Part 2 1968

Reference: MFH-SS014

Second volume of the 1968 season dedicated to Sport Prototypes, the highlights being the chapters on the 1000 km of Nrburgring and the 24 hours of Le Mans. Includes images of the Ford GT40, Porsche 908, Chevron B8, Alfa Romeo T33/2, Alpine A220 and A221, Howmet TX and Ford F3L P68. It includes a total of 108 pages with color and black and white images, as well as Japanese text with partial English translation.
Click here for more details

Heller: Model car kit 1/8 scale - Citron 15CV Six Traction Avant 1938 - plastic parts, rubber parts, water slide decals and assembly instructions

Reference: 80799

There are models that our parents surely wanted to mount as a kit, not only because they were one of the first cars they saw circulating on the streets, but because they were iconic models that existed years ago. After a long time, Heller brings us the reissue of one of its "greatest" models, the Traction Avant at 1/8 scale!! All in giant, a model that has nothing more and nothing less than 1054 pieces, and whose size once assembled is 595 x 220 cm. And with such dimensions and number of parts, everything can be opened, both the four doors and the front hoods, with a fantastic reproduction of the engine, such as the trunk lid on which the spare wheel is located. Enormous no matter where you look at it!
Click here for more details

D.A.B. Models: Detail up set 1/24 scale - Lancia Super Delta - 3D printed parts - for Hasegawa references 20433, 25013, CR-13, 20457, 20507, 20548, 25015, CR-15, 25076, CR-116, HACR13, 25076, CR-116, HACR15, 25015 and CR-15

Reference: DAB24-032

Parts to upgrade the entire front grille assembly, including the base of the headlights, for Hasegawa Lancia "Super Delta" kits, where the grille comes on the kit as a separate plastic body piece. The exploded view of the set allows, apart from a maximum detail of the grilles, to easily paint the red frame characteristic of this version, as well as the central metallic frame. For the optics of the headlights, the transparent ones of the model itself are used.
Click here for more details

Tabu Design: Marking / livery 1/12 scale - Yamaha YZR500 0WA8 Roberts Team sponsored by Lucky Strike - Wayne Rainey, Kevin Magee - Motorcycle World Championship 1989 - water slide decals and tobacco sponsor decals

Reference: TABU12076

Wayne Rainey's bike had the Lucky Strike logo, right? And what happens to your kit of the 1989 Yamaha YZR500 Roberts Team...? Do not torture yourself, here is the tobacco advertising that is missing. You and Wayne can now finally be in peace and harmony with the world.
Click here for more details

Studio27: Carbon fibre pattern decal set 1/12 scale - Yamaha YZF-R1M - water slide decals and assembly instructions - for Tamiya references TAM14133, HC-14133 and TMY14133

Reference: ST27-CARBOND12007

Although the Yamaha YZF-R1M is a street bike, it is becoming more and more common for brands to incorporate some carbon parts, both to reduce weight and to resemble their competition counterparts. Studio27 has created a decal sheet with the necessary carbon patterns to decorate the fairing, fenders, rear cowl, and for other details and parts of your Yamaha YZF-R1M Tamiya kit.
Click here for more details

Studio27: Carbon fibre pattern decal set 1/12 scale - Honda CBR1000RR-R Fireblade SP - water slide decals and assembly instructions - for Tamiya reference TAM14138

Reference: ST27-CARBOND12010

The Honda CBR1000RR was born to be used in the WSBK, so weight is vital, which is why several of its parts are made of carbon... apart from the aesthetically pleasing finish. So that your Tamiya kit does not lack detail, we present you the carbon frames designed by Studio27 for use in the 1/12 scale Honda CBR1000RR-R Fireblade SP. Simply wonderful!!!
Click here for more details

Studio27: Marking / livery 1/24 scale - McLaren Senna XP Home Victory #1 - water slide decals and assembly instructions - for Tamiya references TAM24355, T24355 and TAM24355ST

Reference: ST27-DC1237

If the McLaren Senna XP is already a very special car, the Home Victory unit, which pays tribute to the first victory that Senna achieved in Brazil with McLaren, is even more so. There is only one! Better if we don't talk about its price, but what we can do is use the Studio27 decal set with the green and yellow motifs of the Brazil flag to convert our carbon fiber model of the McLaren Senna XP into this very special version.
Click here for more details

Tabu Design: Marking / livery 1/12 scale - Suzuki GSX-RR Ecstar Team Team sponsored by Monster Energy Estrella Galicia #36, 42 - Motorcycle World Championship 2022 - water slide decals - for Tamiya reference TAM14139

Reference: TABU12092

Here is the decoration with which Joan Mir and Alex Rins are defending the colors of Suzuki this 2022 season, so you can continue completing your collection of Suzukis GSX-RR from the Moto GP World Championship. A decal sheet that complements the one that comes with the kit, and that includes the logos of the new sponsors of 2022.
Click here for more details

KMP Kool Models Production: Rims and tyres set 1/24 scale - Speedline for Lancia Delta HF 1993 - 3D printed parts - 5 units

Reference: KMP-TK24005

Set of 17" Speedline rims with the design used by many Lancia Delta HF Integrale Gr.A, such as the official Repsol during the 1993 season. As a specific feature of its design, the outer cooling holes of the rim are rectangular, which sets it apart from the similar rim used in 1992. Two cooling vents for the front wheels are included in the set, which is ideal for combining with the KMP-TK24152 tarmac conversion kit.
Click here for more details

Reji Model: Marking / livery 1/24 scale - Toyota Carina E ST191 Toyota Belgium Team sponsored by Castrol #4 - Renaud Verreydt + Isolde Holderied + Freddy Loix - 24 Hours SPA Francorchamps 1996 - resin parts, water slide decals and assembly instructions - for Beemax Model Kits reference B24024

Reference: REJI-359

Interesting version of the Toyota Carina E in its participation in the 24 hours of Spa in 1996, in which it achieved the eighth final position. Reji has complemented the decoration with the important aerodynamic details that began to characterize vehicles in the supertourism category from the year 1995, with substantial changes in the front skirts and rear spoiler, perfectly reproduced with resin parts, as well as the rims and exterior mirrors, along with the left-hand drive dashboard. One more for the Castrol collection!
Click here for more details

Reji Model: Marking / livery 1/24 scale - Mitsubishi Lancer Evo VI sponsored by Marlboro 1999 and 2000 - water slide decals, assembly instructions and tobacco sponsor decals

Reference: REJI-370

Sheet of decals with the tobacco advertising logos used on the Mitsubishi Lancer Evo VI from the 1999 and 2000 seasons, in such mythical rallies as San Remo, or Montecarlo itself in the sections within the principality, such as in the podium, and that will serve to complete the decoration of your model.
Click here for more details

Reji Model: Rims 1/24 scale - Gotti rear wheels for Porsche 911 SC RS - 3D printed parts - for Nunu reference PN24011 - 2 units

Reference: REJI-SP957

There were so many Porsche 911 SC RS used by different teams in different rally championships, that many different rims were mounted. One of the most used brands for this was Gotti, and to recreate the versions that used these rims, such as that of the Belga team, Reji offers us a set of 2 Gotti rear rims to use with the original tire of the Porsche model 911 SC RS from Nunu.
Click here for more details

StreetBlisters: Paint for airbrush - Alfa Romeo Giulia Quadrifoglio Verde Montreal - 1 x 30ml

Reference: SB30-0370

Pre-thinned paint bottle ready for airbrush use, including 30ml of product.
Click here for more details

StreetBlisters: Paint for airbrush - Alfa Romeo Giulia Quadrifoglio Blu Misano - 1 x 30ml

Reference: SB30-0371

Pre-thinned paint bottle ready for airbrush use, including 30ml of product.
Click here for more details

StreetBlisters: Paint for airbrush - Alfa Romeo Giulia Quadrifoglio Blu Montecarlo - 1 x 30ml

Reference: SB30-0372

Pre-thinned paint bottle ready for airbrush use, including 30ml of product.
Click here for more details

StreetBlisters: Paints set for airbrush - Alfa Romeo Giulia Quadrifoglio Rosso Competizione - 2 x 30ml

Reference: SB30-0373

Pre-thinned paint bottle ready for airbrush use, including 30ml of product.
Click here for more details

StreetBlisters: Paints set for airbrush - Alfa Romeo Giulia Quadrifoglio Ocra - 2 x 30ml

Reference: SB30-0374

Pre-thinned paint bottle ready for airbrush use, including 30ml of product.
Click here for more details