Newsletter 520: MFH May 2022 Re-releases

MFH May 2022 Re-releases

MFH May 2022 Re-releases
The month of May is slipping through our fingers, but there are still a few days left and there is still time to preorder some of the fantastic 1/12 scale models that MFH reissues. The list is really sweet: Porsche 917K, Alfa Romeo 159, Ferrari 256F1, Lancia 037 Rally and Ferrari 126C2. Run to preorder yours if you want it because they are very limited units and on May 31st they will stop accepting orders!!!

And more reissues: Nunu's reissues of both the Martini sponsored Lancia Delta S4 and the Audi Sport Quattro S1 of the official team return back to SpotModel's shelves. They are also limited units, so don't hesitate for too long! :)

And looking forward, we get news of an awesome release by Tamiya, nothing less than the Ducati Superleggera V4, which we are expecting to get after the summer.

At SpotModel we don't get a break!! :-)

Model Factory Hiro: Model car kit 1/12 scale - Porsche 917K Automotive Engineering Team sponsored by Gulf #1, 2 - Joseph 'Jo' Siffert + Brian Redman, Pedro Rodriguez + Leo Kinnunen - 24 Hours of Daytona 1970 - photo-etched parts, resin parts, rubber parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts, assembly instructions and painting instructions

Reference: MFH-K511

Scale kit based on the Porsche 917K used by the Automotive Engineering team during the 1970 24 Hours of Daytona, where both team cars achieved the one-two finish. A complete and detailed model that includes white metal and resin parts, photo-etched, vacuum-formed parts, turned metal parts, rubber tires, decals, etc. Once assembled, the model allows you to remove the front and rear hoods, as well as the doors, revealing the complete interior and mechanical parts.
Click here for more details

Model Factory Hiro: Model car kit 1/12 scale - Porsche 917K Automotive Engineering Team sponsored by Gulf #20, 21 - Joseph 'Jo' Siffert + Brian Redman, Pedro Rodriguez + Leo Kinnunen - 24 Hours Le Mans 1970 - photo-etched parts, resin parts, rubber parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts, assembly instructions and painting instructions

Reference: MFH-K512

Model kit based on the Porsche 917K used by the Automotive Engineering team during the 1970 Le Mans 24 Hours, with a wider rear hood compared to the one used that same year at Daytona. Neither of the two team cars made it to the finish line. A complete and detailed model that includes white metal and resin parts, photo-etched, vacuum-formed parts, turned metal parts, rubber tires, decals, etc. Once assembled, the model allows you to remove the front and rear hoods, as well as the doors, revealing the complete interior and mechanical parts.
Click here for more details

Model Factory Hiro: Model car kit 1/12 scale - Porsche 917K KG Salzburg Team #23, 31, 32 - Hans Herrmann + Richard Attwood, Vic Elford + Denis Clive 'Denny' Hulme, Kurt Ahrens + Richard Attwood - 24 Hours Le Mans, Watkins Glen 6 Hours 1970 - photo-etched parts, resin parts, rubber parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts, assembly instructions and painting instructions

Reference: MFH-K513

Scale kit based on the Porsche 917K used by the Porsche KG Salzburg team during the 1970 24 Hours of Le Mans, where they achieved victory with the vehicle painted in red, and in the 6 Hours of Watkins Glen in the same year, where they also achieved first place, but with the vehicle in this case painted in blue. A complete and detailed model that includes white metal parts, resin parts, photo-etched, vacuum-formed, turned metal parts, rubber tires, decals, etc. Once assembled, the model allows you to remove the front and rear hoods, as well as the doors, revealing the complete interior and mechanical parts.
Click here for more details

Model Factory Hiro: Model car kit 1/12 scale - Alfa Romeo 158 Alfetta - Juan Manuel Fangio, Giuseppe Farina, Luigi Fagioli, Reg Parnell, Consalvo Sanesi, Piero Taruffi - French Formula 1 Grand Prix, British Formula 1 Grand Prix, Italian Formula 1 Grand Prix 1950 - multimaterial kit

Reference: MFH-K519

An impressive kit including white metal parts, resin parts, photoetched parts, turned metal parts, rubber tires, .... all with a wealth of details, such as the spoke rims to be assembled one spoke at a time.
Click here for more details

Model Factory Hiro: Model car kit 1/12 scale - Alfa Romeo 159 Alfetta - Giuseppe Farina, Baron Emmanuel 'Toulo' de Graffenried, Juan Manuel Fangio, Felice Bonetto - Spanish Formula 1 Grand Prix, Italian Formula 1 Grand Prix 1951 - multimaterial kit

Reference: MFH-K520

An impressive kit including white metal parts, resin parts, photoetched parts, turned metal parts, rubber tires, .... all with a wealth of details, such as the spoke rims to be assembled one spoke at a time.
Click here for more details

Model Factory Hiro: Model car kit 1/12 scale - Lancia 037 Rally sponsored by Martini #1 - Walter Rhrl + Christian Geistdrfer - Monte Carlo Rally - Rallye Automobile de Monte-Carlo 1983 - photo-etched parts, resin parts, rubber parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts, assembly instructions and painting instructions

Reference: MFH-K489

The winner of the 1983 Monte Carlo rally with Walter Rhrl at the wheel. This incredible Model Factory Hiro kit, released as part of a limited series, includes white metal and resin parts, turned metal parts, photo-etched parts, vacuum-formed parts, rubber tires, decals, and other materials. Details such as the rear grille with the pre-painted Pirelli logo undoubtedly help to achieve an unbeatable finish. Once finished, the model allows you to open the front and rear hoods, as well as the doors, being able to admire all the detailing of the interior and the engine.
Click here for more details

Model Factory Hiro: Model car kit 1/12 scale - Lancia 037 Rally sponsored by Martini #6, 9 - Markku Aln + Ilkka Kivimki - Sanremo Rally, Tour de Corse 1983 - photo-etched parts, resin parts, rubber parts, seatbelt fabric, turned metal parts, vacuum formed parts, water slide decals, white metal parts, assembly instructions and painting instructions

Reference: MFH-K490

This incredible Model Factory Hiro kit recreates the versions of the Corsica and San Remo rallies of the 1983 season, where Marku Aln won victory aboard the Lancia 037. A limited series that includes resin and white metal parts, turned metal parts, photo-etched, vacuum-formed, rubber tires, decals, and other materials. The front hood and doors can be opened to admire all the interior and engine detail.
Click here for more details

Model Factory Hiro: Model car kit 1/12 scale - Lancia 037 Rally sponsored by Martini #4, 5 - Markku Aln + Ilkka Kivimki, Attilio Bettega + Maurizio Perissinot - Sanremo Rally, Tour de Corse 1984 - photo-etched parts, resin parts, rubber parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts, assembly instructions and painting instructions

Reference: MFH-K491

The version of the rally where the Lancia 037 achieved its last victory in the World Rally Championship, in the Tour de Corse in 1984, while the second place achieved by Bettega in the San Remo that same year was her last podium finish in a round of the world. This incredible Model Factory Hiro kit, released as part of a limited series, includes white metal and resin parts, turned metal parts, photo-etched, vacuum-formed parts, rubber tires, decals, and other materials. Once finished, the model allows you to open the front and rear hoods, as well as the doors, being able to admire all the interior and engine detailing.
Click here for more details

Model Factory Hiro: Model car kit 1/12 scale - Lancia Rally 037 Jolly Club Team sponsored by Totip #9 - Massimo 'Miki' Biasion + Tiziano Siviero - Tour de Corse 1984 - photo-etched parts, resin parts, rubber parts, seatbelt fabric, turned metal parts, vacuum formed parts, water slide decals, white metal parts, assembly instructions and painting instructions

Reference: MFH-K515

A new great creation by Model Factory Hiro in 1/12 scale of the version of the Lancia 037 entered by the Jolly Club in the 1984 Tour de Corse rally and used by Miki Biasion to finish in second position. Available in limited units, this incredible Model Factory Hiro kit includes resin and white metal parts, turned metal parts, photo-etched, vacuum-formed parts, rubber tires, decals, and other materials. The front hood and doors can be opened to admire all the interior and engine detail. Don't let it go!!
Click here for more details

Model Factory Hiro: Model car kit 1/12 scale - Lancia Rally 037 Jolly Club Team sponsored by Totip #18 - Massimo 'Miki' Biasion + Tiziano Siviero - Sanremo Rally 1983 - photo-etched parts, resin parts, rubber parts, seatbelt fabric, turned metal parts, vacuum formed parts, water slide decals, white metal parts, assembly instructions and painting instructions

Reference: MFH-K514

This incredible Model Factory Hiro kit recreates the version of the Jolly Club that Miki Biasion used to finish fifth in the 1983 San Remo Rally. A limited series that includes resin and white metal parts, turned metal parts, photo-etched, vacuformed, rubber tires, decals, and other materials. The front hood and doors can be opened to admire all the interior and engine detail. Don't let it go!!
Click here for more details

Model Factory Hiro: Model car kit 1/12 scale - Lancia Rally 037 Grifone Team sponsored by Olio Fiat #11 - Fabrizio Tabaton + Luciano Tedeschini - Sanremo Rally 1984 - photo-etched parts, resin parts, rubber parts, seatbelt fabric, turned metal parts, vacuum formed parts, water slide decals, white metal parts, assembly instructions and painting instructions

Reference: MFH-K516

A new great creation by Model Factory Hiro in 1/12 scale of the version of the Lancia 037 entered by the Grifone in the 1984 San Remo rally and used by Fabrizio Tabaton to finish in fourth position. Available in limited units, this incredible Model Factory Hiro kit includes resin and white metal parts, turned metal parts, photo-etched parts, vacuum-formed parts, rubber tires, decals, and other materials. The front hood and doors can be opened to admire all the interior and engine detail. Don't let it go!!
Click here for more details

Model Factory Hiro: Model car kit 1/12 scale - Lancia Rally 037 sponsored by Martini Racing #2 - Markku Aln + Ilkka Kivimki - 1000 Lakes Finland Rally 1983 - photo-etched parts, resin parts, rubber parts, seatbelt fabric, turned metal parts, vacuum formed parts, water slide decals, white metal parts, assembly instructions and painting instructions - for

Reference: MFH-K517

A new incredible creation by Model Factory Hiro in 1/12 of the lancia 037 with which Alen took the podium in the 1,000 Lagos in 1983, in limited edition. This incredible kit includes white metal and resin parts, turned metal parts, photo-etched, vacuum-formed parts, rubber tires, decals, and other materials. Once finished, the model allows you to open the front and rear hoods, as well as the doors, being able to admire all the interior and engine detailing. Don't miss it!!
Click here for more details

Model Factory Hiro: Model car kit 1/12 scale - Lancia Rally 037 sponsored by Martini Racing #3, 7 - Markku Aln + Ilkka Kivimki - Safari Rally 1984 and 1986 - photo-etched parts, resin parts, rubber parts, seatbelt fabric, turned metal parts, vacuum formed parts, water slide decals, white metal parts, assembly instructions and painting instructions

Reference: MFH-K518

New creation of Model Factory Hiro at 1/12 scale of the version used by Lancia to participate in the 1984 and 1986 editions of the demanding Safari Rally, and which managed to get on the podium in the 1986 edition, This incredible model of Model Factory Hiro, published as part of a limited series, includes white metal and resin parts, turned metal parts, photo-etched, vacuum-formed parts, rubber tires, decals, and other materials. Once finished, the model allows you to open the front and rear hoods, as well as the doors, being able to admire all the interior and engine detailing . Do not miss it!!
Click here for more details

Beemax Model Kits: Model car kit 1/24 scale - Audi Sport Quattro S1 Group B Audi Team Team sponsored by HB International #2, 5, 6 - Hannu Mikkola + Arne Hertz, Walter Rhrl + Christian Geistdrfer - Monte Carlo Rally - Rallye Automobile de Monte-Carlo, Sanremo Rally 1985 and 1986 - plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Reference: BX24035

For a long time we all dreamed of building the tremendous Audi S1 in plastic, and finally we can say that our dreams have come true. The kit includes the decoration of the official team at Montecarlo 1986 and Sanremo 1985, but it does not include tobacco sponsors!!.
Click here for more details

Reji Model: Marking / livery 1/24 scale - Lancia Stratos HF sponsored by Rothmans - SOL-RACE Rally 1981 - water slide decals, assembly instructions and tobacco sponsor decals - for Hasegawa reference 20561

Reference: REJI-364

Decals with the Rothmans logos to complete the decoration of the Lancia Stratos Rothmans Hasegawa kit during its participation in the 1981 Rally RACE, which comes without the tobacco logos. Essentials!
Click here for more details

Nunu: Model car kit 1/24 scale - Lancia Delta S4 Group B Martini International Racing Team #3, 7, 9 - Markku Aln + Ilkka Kivimki, Henri Toivonen + Sergio Cresto, Massimo 'Miki' Biasion + Tiziano Siviero - Monte Carlo Rally - Rallye Automobile de Monte-Carlo 1986 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Reference: PN24030

FINALLY!!!!, the long-awaited plastic kit of the Lancia Delta S4. In addition to being a kit we all wished for, we were lucky enough to also get it with a detailed engine and interior, and a HUGE number of parts to make the assembly that it deserves. Essential for your shelf!!
Click here for more details

Tamiya: Model bike kit 1/12 scale - Ducati Superleggera V4 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Reference: TAM14140

Big surprise with Tamiya's announcement for its next reference in its range of motorcycles. none other than the exclusive Superleggera V4. Few details are known at the moment, but knowing the detail and care with which Tamiya designs its models, we have no doubt that it will be quite a "model".
Click here for more details

Model Factory Hiro: Model car kit 1/43 scale - Lancia Delta S4 Martini International Racing Team #7 - Henri Toivonen + Sergio Cresto - Monte Carlo Rally - Rallye Automobile de Monte-Carlo 1986 - metal parts, photo-etched parts, resin parts, rubber parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts, other materials, assembly instructions and painting instructions

Reference: MFH-K812

After their bigger brothers at 1/12 and 1/24 scale, finally the 1/43 Lancia Delta S4 version from MFH is available. The front and rear hoods have been designed to be removable after completion to show full view of the detailed interior and the mechanical parts, and between other details, the tires come with the pre-painted tire brand. It is not possible to have more details in so little space!
Click here for more details

Model Factory Hiro: Model car kit 1/43 scale - Lancia Delta S4 Martini International Racing Team #4 - Henri Toivonen + Sergio Cresto - Tour de Corse 1986 - metal parts, photo-etched parts, resin parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts, other materials, assembly instructions and painting instructions

Reference: MFH-K813

After their bigger brothers at 1/12 and 1/24 scale, finally the 1/43 Lancia Delta S4 version from MFH is available. The front and rear hoods have been designed to be removable after completion to show full view of the detailed interior and the mechanical parts, and between other details, the tires come with the pre-painted tire brand. It is not possible to have more details in so little space!
Click here for more details

Model Factory Hiro: Model bike kit 1/9 scale - BSA Blue Star 350 1933 - CNC metal parts, metal parts, photo-etched parts, resin parts, rubber parts, turned metal parts, water slide decals, white metal parts, other materials, assembly instructions and painting instructions

Reference: MFH-K814

348 cc engine, 18 hp, high compression pistons, high lift cams and carburetor with accelerator pumps... the BSA Blue Star versions, although they were externally identical except for the color range, had a level of much higher performance than conventional models. A very desired motorcycle in its time, which will be equally desired in this very complete model that MFH brings us.
Click here for more details

Shunko Models: Marking / livery 1/12 scale - Nissan Skyline GT-R Group A Hasemi Motor Sport Team sponsored by Reebok #1 - Masahiro Hasemi + Anders Olofsson - Japan Touring Car Championship (JTCC) 1990 - water slide decals and assembly instructions - for Fujimi reference FJ14107

Reference: SHK-D457

The reissue of the Fujimi 1/12 scale model of the impressive Nissan Skyline GT-R Gr.A has brought with it that Shunko has decided to bring out some of the most relevant decorations used by the different teams in the seasons of absolute domination of the Skyline in the Japanese Touring Car Championship (JTCC). The Hasemi team with the Reebok sponsorship would fight throughout the 1990 season against the Impul team, sharing all the victories of the season between both teams.
Click here for more details

Shunko Models: Marking / livery 1/24 scale - Nissan Skyline GTS-R R31 Hasemi Motor Sport Team sponsored by Reebok #50 - Masahiro Hasemi + Anders Olofsson - Japan Touring Car Championship (JTCC) 1989 - water slide decals and placement instructions - for Hasegawa references 20372 , 20406 , 20495 and 20549

Reference: SHK-D458

The legend of the Skyline comes from afar, with a presence in competition on Japanese circuits since the mid-1960s, and before the appearance of the R32 it had already won different victories in the Japanese Touring Car Championship (JTCC), as happened in 1989 with the Hasemi team car and its legendary Reebok livery. The decal made by Shunko perfectly collects all the logos, designed and sized for the kit developed by Hasegawa of the Skyline R31 Gr.A.
Click here for more details

Shunko Models: Marking / livery 1/24 scale - Nissan Skyline GT-R Group A sponsored by FET Sports #8 - Kiyoshi Misaki + Naoki Nagasaka - Japan Touring Car Championship (JTCC) 1992 and 1993 - water slide decals and assembly instructions - for Tamiya references TAM24102, TAM24105, TAM24109, TAM24111, TAM24113, TAM24117 and TAM24135

Reference: SHK-D459

This decoration was missing from one of the main animators of the JTCC, the FET Sports team, and at last Shunko has designed and sized it to fit the Tamiya model of the Skyline R32 Gr.A. The collection of the Skyline R32 Gr.A that dominated the JTCC tests for several seasons is almost complete.
Click here for more details

Italeri: Tractor head model kit 1/24 scale - Scania S730 Highline 4x2 - photo-etched parts, plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Reference: 3927

This Italeri scale model reproduces the Scania S730 Highline 4x2. Includes engine, suspension, and cab interior. It has the detailed front grille and the interior is finished with a full range of equipment such as seats and dashboard; the cab can be tilted up once completed, and the chassis reproduces all the details of the real vehicle, such as the drive system and suspension. Photoetched parts are included.
Click here for more details