Newsletter 517: KMP is back!!!

Detailing set for the asphalt version of the Lancia Delta S4 Gr.B, manufactured using 3D printing technology, and designed to be used with the Beemax/Nunu scale kit. Includes 48 3D printed parts, 16 micro magnets, 3 meters of different types of cable, smoked glass, 2 decal sheets, and assembly instructions.

Set of 5 Speedline rims with 4-bolt, which are reproduced on the independent hub, valid for use on models such as the 2013 Ford Escort Cosworth. The diameter of the rim is approximately 21 mm, and about 12 mm wide. These measurements allow the rims to use the tires from the Tamiya model.

With this set of rims and tires the model will be completely changed by having the correct dimensions, design and tires, it will be just like the real car! Includes: 4 x rims, 4 x tires, 9 x central nuts, 4 x brake discs complete with core and caliper, 4 x height correction bushings.

Set of 4 Speedline gravel rims. Requires gravel tires, not included.

Set of 4 BBS rims for the tarmac version of the Subaru Impreza WRC. The rims have a diameter of 21mm, and a width of 11mm. Requires molded slick tires, not included.

Included in this set is everything you need to build the Ford Fiesta WRC in its gravel rally specification and fitted with Pirelli tires such as Rally Kenya 2021. Included is a tire decal sheet, a set of discs brake and calipers in the correct size, and also a full set of suspensions which increase the height of the kit, making the conversion a breeze. All parts are printed with 3D technology.

This detail set will allow you to upgrade and detail the front bay of all Fiesta WRC cars versions since 2017 until 2021, both inclusive. Includes 13 high-quality resin parts, a decal sheet, a pre-cut polystyrene sheet, and detailed instructions.

This set includes the brake disc, hub, rim and tire for the asphalt version of the 2021 Ford Fiesta WRC with Pirelli tires, as used in Croatia, Ypress and other rallies.

Set of 700 1 mm diameter hex bolts: 350 pieces detail only the hex head of the bolt, and another 350 pieces also include washer along with nut. Give yourself the luxury of increasing the detail of the mechanical areas of your models, such as their suspension systems or anywhere else where a single-bolt connection is made... with the start and end part.

Set of 700 0.75mm diameter hex bolts: 350 pieces detail only the hex head of the bolt, and another 350 pieces also include washer along with nut. Give yourself the luxury of increasing the detail of the mechanical areas of your models, such as their suspension systems or anywhere else where a single-bolt connection is made... with the start and end part.

Set of 5 wheels to create an accurate replica of the Peugeot 206 WRC in gravel specifications driven by Valentino Rossi. Does not include tires. The rims are designed for use with the gravel tires from Tamiya kits, such as the gravel versions of the Peugeot 206 itself or the Mitsubishi Lancer Evo VI.

This conversion set allows you to create the variation of the Ford Fiesta WRC that raced in 2018.

This book in the Fast Guide series is packed with photos of the Citroën Xsara WRC. This is an A5 sized book that includes 32 pages of full color photos taken of the actual car today, digitally enhanced to capture even the finest detail and conveniently arranged for quick reference. Undoubtedly, a very interesting guide to get to know in great detail the interior, the distribution of the carbon patterns, and many more parts of the vehicle.

This book in the Fast Guide series is packed with photographs of Marc Marquez' Honda RC213V from the 2014 season. It is an A5 sized book that includes 32 pages of full color photos taken of the bike today, digitally enhanced for capture even the smallest detail and conveniently arranged for quick reference. Without a doubt, a very interesting guide to get to know this beautiful motorcycle in great detail, and also very useful when detailing the Tamiya model.

Bibliographic and photographic reference book about the Lancia Delta S4, in Italian and English language, including 112 pages, more than 100 photographs, 150 illustrations, and a lot of information about what is one of the most fantastic rally cars of all time.

A curious mixed version of the Citroen B14 mixes the pick-up and the conventional tourism with a canvas roof. Heller allows us to make this model as it was done in real life, with the chassis with stringers, leaf spring suspensions, and the bodywork placed directly on the chassis. And in addition, also the engine and gearbox are reproduced.

Decals with the Rothmans logos to complete the decoration of the Hasegawa kit of the Bendiberica Lancia 037 Gr.B during its participation in the 1985 Costa Brava Rally, which comes without the tobacco logos.

Decals with the Rothmans logos to complete the decoration of the Lancia Stratos Rothmans Hasegawa kit during its participation in the 1981 Rally RACE, which comes without the tobacco logos. Essentials!

Decoration for the Honda RS 500 piloted in 1983 by Jack Middelburg , with which he achieved sixth place in the Belgian GP as the best position, finishing the championship in twelfth position. This decal has been printed by Cartograf .

Decoration for the Honda RS 500 ridden in 1985 by Didier de Radigues, Pierre Etienne Samin and Christian Leliard with the sponsorship of ELF. The best results were achieved by De Radigues, with fourth as the best position in the British GP. This decal has been printed by Cartograf .

Decoration of the Yamaha YZR500 ridden in 1980 by Johnny Cecotto, in what was his last season as a motorcycle driver before turning his career around and switching to cars, becoming a Formula 1 driver. In 1980 he participated with a production Yamaha after losing factory rider status at the end of 1979, which hampered their options and results. This decal has been printed by Tin Wizard / Interdecal.

Decoration for the Yamaha YZR500 ridden in 1980 by Patrick Fernandez, where he contested six world championship rounds with a seventh place in the Dutch GP as the best result. This decal has been printed by Tin Wizard / Interdecal.

Decoration for the Yamaha YZR500 ridden in 1980 by Jack Middelburg, who went on to win the Dutch Grand Prix that year, and Boet Van Dulmen. This decal has been printed by Tin Wizard / Interdecal.

Newly designed decals for replacing those of the early season Ferrari F189 kit in 1/20 scale by Tamiya, including tobacco sponsors.

They look the same, but they are not. One of Japan's most famous teams, Impul Nissan, raced in Calsonic colors on the Skyline R32 GT-R for several seasons, including 1991-1993, which look very similar but include small variations. In order to make any of them, Shunko has prepared a set of decals with all the logos used in those three seasons. Now you only have to choose the season. Do you opt for 1 or 12?

Decals newly designed to replace the ones from the Tamiya Tyrrell Ford 003 kit in 1/12 scale, Includes the dial decals for the instrument panel.

Decals newly designed to replace the ones from the Tamiya Tyrrell Ford P34 kit in 1/12 scale, Includes the dial decals for the instrument panel.

We were missing an option for Fujimi's impressive 1/12 scale kit of the Skyline R32 GT-R. One of the most famous teams in Japan, the Impul Nissan, ran with the Calsonic colors on the Skyline R32 GT-R for several seasons, including those between the years 1990 and 1993, very similar to each other but with small variations. In order to make any of the variants used during those 4 seasons, Shunko has prepared a set of decals with all the logos. Now you only have to choose the season!

The reissue of the Fujimi 1/12 scale model of the impressive Nissan Skyline GT-R Gr.A has brought with it that Shunko has decided to bring out some of the most relevant decorations used by the different teams in the seasons of absolute domination of the Skyline in the Japanese Touring Car Championship (JTCC). The NISMO team, sponsored by Kyoseki, won two races in the 1992 season, and only in one in 1993 did they reach the top step of the podium.

What a joy now that Tabu has decals with eeevery sponsor of the FW14B. And when we say eeevery, we mean exactly that: eeevery ONE of them (including the camels of Camel)

Complete set of decals, including tobacco sponsor logos, for the Ferrari 641/2 in 1/12 scale by Tamiya. Absolutely essential !!