Newsletter 507: Screendesign

Decals for recreating the Yamaha YZR500 that raced in 1979 with Christian Sarron, Raymond Roche and Patrick Pons.

Decals for recreating the Yamaha YZR500 that raced in 1980 with Christian Sarron, Raymond Roche and Patrick Pons.

Livery for the Ducati Desmosedici GP3 by Heller (reference 80912), corresponding to the preseason tests and press release version of the 2003 season bike.

Decoration for the Ducati Desmosedici GP3 by Heller, reference 80912, corresponding to the preseason motorcycle.

Blue color tone as it was used in the Ford Escort sponsored by Eaton Yale. This color has been specifically formulated for use with the Revell scale model kit.

Red color tone used in the Volkswagen Golf Gti. This color has been specifically formulated for the Fujimi, Italeri and Revell scale models.

This "N5-F019 - Medium polishing compound" by Number5 is the result of an extensive and thorough process for developing a medium polish that provides an impressive finish to your car, truck and motorcycle scale models , thanks to the micro-abrasive technology used that quickly eliminates paint defects on your models. It is very easy to apply and clean: once the usual sanding process is finished, place a small amount of product on a cotton pad and gently rub the surface to be polished. The process can be repeated several times until the desired finish is achieved. For best results, we recommend a subsequent application of the fine-grained polish "N5-F020 - Fine polishing compound". The bottle includes 30 ml of product. Remember to shake well the bottle before use.

This " N5-F020 -Fine polishing compound " by Number5 is the result of an extensive and exhaustive process for developing a fine grain polish that provides an impressive finish to your car, truck and motorcycle scale models, thanks to the micro-abrasive technology used that quickly eliminates paint defects on your models. It is very easy to apply and clean: once the first step of the polishing process is finished with the product "N5-F019 Medium polishing compound", place a small amount of the product on a cotton pad and gently rub the surface to be polished. The process can be repeated several times until the desired finish is achieved. The bottle includes 30 ml of product. Remember to shake well the bottle before use.

This magnificent anti-silicone additive is used to eliminate craters (fisheye effect) produced in lacquer or paint due to silicone, grease, oil, etc. contamination. It can be used with both Number Five lacquer and paints as well as acrylic or solvent-based paints from other manufacturers. To do this, add a maximum of 3% of the product to the total amount of lacquer or paint, mix well and apply the lacquer or paint as usual.

This 3ml plastic pipettes are ideal for measuring, transferring and handling paints and thinners. 10 units per pack.

The Mercedes G230 has earned a reputation as a versatile vehicle capable of reaching the most difficult areas, thanks to its effective traction system, its height and its wide angles of attack and fording. For this reason, it has not only been used for its lucky owners to get to their homes or travel through complicated roads, but many Emergency Services also have or have had units of this model in their fleets. Italieri has developed a model that includes up to four options of the Mercedes as a fire vehicle, both from Germany and Italy. Logically, compared to the street version scale kit, it incorporates all the necessary specific elements, such as the rotating lights or the siren on the roof, apart from a hose system to put out small fires.

Blue color tone as used on Sunoco Oil sponsored vehicles.

Red color tone used in many vehicles. It is the standard tone used by firefighters around the world, in fire extinguishers, etc.

Red color tone used in the different Volkswagen Transporter models. It is the perfect shade to paint the Hasegawa and Revell scale models.

Set of parts to replace the front fork of Meng's BMW HP4 Race in 1/9 scale, so that it is fully operational. And with the added advantage that the color of the metal is practically the same as that of the real bike, so you can save on painting the part. Includes several turned metal parts.

Resin parts of the front and rear bumpers and license plates to modify the corresponding models of the Nunu/Beemax BMW E46, thus converting them into their corresponding M-Tech street version. Ideal to combine with the USCP 24T045 street interior reference.

Front and rear bumpers, side rails and license plates for the street version of the BMW 320i e46 based on the Nunu/Beemax scale model of the competition version. Ideal to combine with the USCP 24T045 street interior reference.

New re-edition for a limited time of this very interesting Fujimi scale model belonging to the "Enthusiast" series of the Porsche 911 S Coupe. It includes an incredible exploded view of the famous air-cooled rear boxer engine so characteristic of the Porsche 911, as well as the option of being able to detail and open the area of the front compartment.

This is the perfect photo-etched parts set for the Porsche 911 SC, manufactured by Nunu. Includes photoetched parts for detailing the model, the antenna made of turned metal, and a decal sheet with the Rothmans logos, kevlar patterns of the bucket seats, etc.

Photo-etched parts, antennas and seatbelt fabric for the Honda Civic EF9 Group A scale model by Nunu.

Tameo brings us the car from the race where Bruno Giacomelli got his first and only podium in Formula 1. Good place Las Vegas to get lucky! Made in Tameo's usual high-quality white metal casting, with various photo-etched sheets for the rims, suspension wishbones, body side panels with tails, spoilers and other mechanical parts. The decals, as usual, are printed by Cartograf , and include tobacco advertising.

What a great plastic reproduction, and not just because of the size, of the mythical Bugatti Type 35B that achieved so many successes! Totally new Italeri molds, which include a complete breakdown of elements such as the engine, the chassis, the suspensions, complemented with a set of photo-etched parts where a detailed front grille shines and a decal sheet that allows you to select between two versions with pedigree, the winner in Monaco in 1929 with number #12 and the one that obtained second position in 1930 with number #18, yes, behind another Bugatti Tyoe 35. Spectacular!

We present you the carbon frames designed by Studio27 for using on the Tamiya Suzuki GSX-RR in 1/12 scale. Even the smallest part of the kit has its pattern, such as the protections of the levers, or the protections of the rear swingarm, as well as of course including larger parts, such as the interior of the fairing, Wonderful!!!

Do you want to do something different with your Revell model of the Volkswagen Transporter T2? USCP offers you the possibility of transforming your model into the Pick-Up version, with a complete body in high-quality resin, complete with the inner door panels, and the side plates of the box separated with their corresponding hinges. What are you going to carry in your pick-up?

An old and coveted model that Italieri has just reissued to everyone's delight, nothing less than the Ford Escort Zakspeed in its circuit configuration that achieved such good results in many championships throughout Europe since the mid-70s. The D&W version was the mainly used in the European Touring Car Championship (ETCC), included in the Gr.2 category. The model includes an interesting exploded view of the engine , and the numbers on the decal sheet correspond to the 500 km race at Brands Hatch, where the #20 number finished second overall, first in its division. Don't miss out on this new opportunity!

Fantastic model kit from MFH where, as usual, various materials are combined, including white metal, turned metal parts, photo-etched parts, rubber rims and a decal sheet. Tires feature pre-printed manufacturer logos. The body cover can be removed once the model is assembled, allowing a full view of the detailed interior and mechanical parts. This reference recreates the version used by McLaren in the Spanish GP held in Montmeló, where both drivers were on the podium, with victory for Senna with Prost in third position. This version C has a different rear wing, with the additional flaps used in this low-medium speed circuit.

Fantastic model kit from MFH where, as usual, various materials are combined, including white metal, turned metal parts, photo-etched parts, rubber rims and a decal sheet. Tires feature pre-printed manufacturer logos. The body cover can be removed once the model is assembled, allowing a full view of the detailed interior and mechanical parts. This reference recreates the version used by McLaren in the Japanese GP, with the famous and controversial maneuver between Prost and Senna, and in Portugal, where Alain Prost obtained second position, while Senna had to leave by accident. This B version features a slightly different rear spoiler.

Fantastic model kit from MFH where, as usual, various materials are combined, including white metal, turned metal parts, photo-etched parts, rubber rims and a decal sheet. Tires feature pre-printed manufacturer logos. The body cover can be removed once the model is assembled, allowing a full view of the detailed interior and mechanical parts. This reference recreates the version used by McLaren in the German GP, with Senna and Prost getting the double in that order, and in Italy, where Alain Prost won, while Senna had to retire. This version A features a rear wing in a high-speed configuration.

This is a limited edition decal.

This is a limited edition decal.

Who would have told you that your precious Tamiya Ferrari F2001 kit didn't come with the tobacco advertising decals? How awful! Well, don't worry, here's your salvation. This decal sheet includes all those logos, so you can build the complete version of this beautiful single-seater, World Champion in 2001 with no less than nine victories.

The MFH Ferrari F187 is a small wonder. A complete and detailed model where multiple materials are combined such as white metal, photo-etched plate, rubber tires, aluminum rims and a complete decal sheet. All this allows the original vehicle to be reproduced down to the smallest detail. The top cover can be removed, allowing a full view of the detailed interior and engine/gearbox assembly. This particular version is the one that ran in the 1987 Japanese GP.

The MFH Ferrari F187 is a small wonder. A complete and detailed model where multiple materials are combined such as white metal, photo-etched plate, rubber tires, aluminum rims and a complete decal sheet. All this allows the original vehicle to be reproduced down to the smallest detail. The top cover can be removed, allowing a full view of the detailed interior and engine/gearbox assembly. This particular version is the one that ran in the 1987 Monaco GP, and include the low turbo duct found in earlier builds in the beginning of the season.

The MFH Ferrari F187 is a small wonder. A complete and detailed model where multiple materials are combined such as white metal, photo-etched plate, rubber tires, aluminum rims and a complete decal sheet. All this allows the original vehicle to be reproduced down to the smallest detail. The top cover can be removed, allowing a full view of the detailed interior and engine/gearbox assembly. This particular version is the one that ran in the 1987 British GP, and wet tires are included.

A fantastic and detailed scale model where several materials are combined, including white metal, turned metal parts, photo-etched parts, rubber tires and decal sheet. The outer part of the rims has been machined from high-quality aluminium, and the tires are pre-printed with the manufacturer's logos. The body cover can be removed once the model is assembled, allowing a full view of the detailed interior and mechanical parts. This reference recreates the version used by Ferrari in the Hungarian GP, where Nigel Mansell obtained his second victory of the season.

A fantastic and detailed scale model where several materials are combined, including white metal, turned metal parts, photo-etched parts, rubber tires and decal sheet. The outer part of the rims has been machined from high-quality aluminium, and the tires are pre-printed with the manufacturer's logos. The body cover can be removed once the model is assembled, allowing a full view of the detailed interior and mechanical parts. This reference recreates the version used by Ferrari in the Portuguese GP, where Gerhard Berger obtained his first and only victory of the season.

Complete and detailed kit where various materials are combined, including white metal parts, turned metal parts, photo-etched parts, rubber tires, 3D printed parts using laser lithography and a sheet of decals that allow the original vehicle to be reproduced with great fidelity, The tires feature pre-printed manufacturer logos, and the front and rear body covers can be removed, allowing a full view of the detailed interior and mechanical parts. Nothing better than using JOE HONDA's publishing about the 1967 Ferrari 330P4 P3/4 to get the best results.

Model with everything you need to assemble the Ducati 750 TT1 in the same way as the mechanics of the time, but to scale. The clutch assembly mounted disc by disc, the cylinder mounted fin by fin around the cylinder liner, or the chain mounted link by link, are just a sample of the level of detail in this model. The photos speak for themselves.

MFH presents us the model of the impressive Porsche 917/30 winner of the 1973 Can-Am championship at 1/43 scale, where the most diverse materials are combined. Apart from the classic white metal and resin, the pieces that make up the different parts of the tubular structure of the chassis or the grills of the bodywork over the front wheels printed in 3D (laser lithography) are striking, as do the tires with the pre-painted tire brand. Despite its scale, all mechanical parts are accessible and visible, presenting a high level of detail.

MFH presents us the model of the impressive Porsche 917/30 Martini of the Interserie championship at 1/43 scale, where the most diverse materials are combined. Apart from the classic white metal and resin, the pieces that make up the different parts of the tubular structure of the chassis or the grills of the bodywork over the front wheels printed in 3D (laser lithography) are striking, as do the tires with the pre-painted tire brand. Despite its scale, all mechanical parts are accessible and visible, presenting a high level of detail.

MFH presents us the model of the impressive Porsche 917/30 Jagermeister of the Interserie championship at 1/43 scale, where the most diverse materials are combined. Apart from the classic white metal and resin, the pieces that make up the different parts of the tubular structure of the chassis or the grills of the bodywork over the front wheels printed in 3D (laser lithography) are striking, as do the tires with the pre-painted tire brand. Despite its scale, all mechanical parts are accessible and visible, presenting a high level of detail.