Newsletter 504: Finish line

There are doublets, triplets, but Kamaz's results in the 2022 Dakar goes even further... the first four positions of the rally in the truck category were his... and now there are 19 victories. The manufacturer Zvezda has developed the model of this beast of the desert, and although in principle its scale is somewhat smaller than usual (1/35), the almost 7 meters long of the real model will make it still have a significant size. The kit includes a total of 275 parts, and if the mockups and the manual do not lie, the detail of the model with all the mechanical parts will be spectacular. Zvezda has the official license from the Kamaz Rallye team, and so the model includes all sponsor logos as shown in the product box pictures, covered by such license permit.

Fantastic model of one of the most famous Formula 1 Lotus. It includes a detailed engine and gearbox, photo-etched parts for some of the grilles, turned parts for the intake trumpets, as well as metal springs for the rear shock absorbers. Although it appears in the image of the box, it does not include a pilot.

Set of water-based decals that includes everything needed to transform the Nunu kit into the 2005 version where Priaulx premiered the number 1 on its doors. The decals allow the modeller to complete the decoration starting from the bodywork in white, or to choose to paint part or all of the blue areas of the bodywork, since the decals of the different sponsors go separately on the decal sheet, which It is an advantage for areas such as defenses due to its complicated and rounded shapes.

Set of water-based decals that includes everything needed to transform Nunu's kit into the versions used by the BMW Germany team in the final Macau race in 2004 and in the Magny-Cours race in the 2005 season. A complete set of decals. decals that recreate in great detail the legendary BMW decoration, simulating the internal parts of the car as if it were an X-ray. The sequence for placing the decals, with the background decoration separated from the rest of the sponsors' logos, seeks to facilitate the work of placing the decals.

Set of water-based decals that includes everything needed to transform Nunu's kit into the versions used by the BMW Germany team in the final race in Macau in 2004 and in the Monza race in the 2005 season. A complete set of decals that It recreates in great detail the already mythical BMW decoration, simulating the internal parts of the car as if it were an X-ray. The sequence for placing the decals, with the background decoration separated from the rest of the sponsors' logos, seeks to facilitate the work of placing the decals.

Set of water-based decals that includes everything needed to transform Nunu's kit into the version used by the BMW Italy / Spain team in the Oschersleben race (Germany) in the 2005 season. A complete set of decals that also includes the corresponding ones to the interior plates that helped identify the pilot in the interior cameras.

At last! And the fact is that we had been waiting for a long time for the re-edition of this Tamiya classic at 1/12 scale, with its beautiful 6-cylinder V-turbo engine perfectly reproduced with its characteristic metallic blue cylinder heads. A single-seater that allowed Jabouille to achieve victory in the Grand Prix of his country, France, held at the Dijon-Prenois circuit. This re-edition also comes with photoetches, and with the decals printed by Cartograf. Do not lose this chance!

A superb scale model of this Italian beauty, the Pagani Huayra, made by Aoshima. The kit includes a fully detailed interior, fully working doors and bonnet, detailed monocoque, fully detailed engine, ... Delicious !!!

Water-based decals to recreate one of the famous Rothmans versions that were used in the Porsche 911 SCRS homologated as Gr.B. It includes the Rothmans decals that Nunu's kt does not have, as well as an improved version of the gold and red lines that allow you to easily delimit the transition from blue to white on the bodywork.

But how complete! It's the first thing that came to mind after seeing the content of this detail up set for Nunu's Porsche 911 SC RS. Not only does it include up to three photo etched plates and some turned metal parts, but it also includes the tobacco decals that we miss in the model, masks to paint the windows, and even masks to delimit the area of the bodywork to paint with Rothmans blue. I said, but how complete!

The first thing we have done when we see the content of the Scale Lab detail up set for the Sauber Mercedes C9 has been to set ourselves a challenge, which we invite you to join... and that is to find what is missing or what to add to the set that is not already included. We are still looking for an answer. The best thing to do? Take a look at the photos...

Set of BBS rims with Pilot Sport tires, along with inflation valves and the corresponding axles, for updating the wheels and tires of the BMW M8 GTE scale model by Nunu.

In the last round of the 1986 World Rally Championship, which would also be the last in which Gr.B's were allowed, only one official Delta S4 was entered in the race, with the particularity that for commercial reasons in the USA, the usual Martini and Lancia Martini logos were replaced by those of Martini&Rossi. This special decoration has been recreated by Reji, being also the winning vehicle of the rally.

The Ford Escort culminated in its evolution with its WRC version, which not only allowed it to introduce improvements to the rear suspension, but also some aerodynamic changes, with the mythical rear spoiler of the Cosworth versions disappearing. In 1998 the works team began to run with the colors of Valvoline, and to make up for the missing detail, Reji not only provides us with the decal of the decoration used in Monte Carlo, but also includes the complete front bumper and the rear spoiler, both pieces made of resin, of the WRC versions.

Black logos of the "Brembo" brand in different sizes and variants for use on the brake calipers of your motorcycles and cars scale models of all scales.

White logos of the "Brembo" brand in different sizes and variants for use on the brake calipers of your motorcycles and cars scale models of all scales.

Decoration for the Ducati Desmosedici GP3 by Heller, reference 80912, corresponding to the preseason motorcycle.

Improvement and detail set for the Aoshima Huracan, in both the LP610-4 and Performante versions, which includes a photo-etched sheet, several machined parts for the exhausts, a sheet of chromed metal, etc. Awesome!!!

Product formulated for softening and removing the remains of cyanoacrylate glue already hardened. It is perfect for small touch-ups once the piece has been glued. It is used by rubbing the surface to be cleaned with paper towels soaked in the cleaning liquid. After doing so, clean the surfaces with paper towels while they are wet to remove the remains of the cleaner. This product can damage plastic if exposed for too long or using too much product, use just enough and quickly. The jars are not filled 100% to leave some air and make it work properly.

Set of 4 high resolution rims with split hubs and raised lettering plus 2 "fans" for front wheels. In addition, all the necessary decals are included to reproduce the decoration of the 1986 Rally de Portugal, using those of the model itself as a base. The numbers on the decals match with the kit's decals that have to be replaced. Each of the rims has an approximate diameter of 18.8 mm and a width of 10.4 mm.

If you want to refresh the decals of your Tamiya kit of the Renault 30B, or you prefer to make the decoration of the 30C version (which does not come with the model) used in the first two races of the 1983 season, do not hesitate to get a set of these beautiful Studio27 decals, reissued for a short period of time.

Re-edition of this very interesting decal for the Tamiya 1/20 scale model of the Leyton House Judd CG901B. This is the ideal decal sheet to replace the old decals on your kit, so hurry as it will be available for a limited time.

Updated version of the Tabu decals including all logos missing in the Tamiya model.

Tabu reedits this revision of the decals including Marlboro logos for the MP4/5B. If you want it.... run for it!

Three sheets full of decals with all the neccesary carbon fibre patterns for the chassis, engine area, bottom and other parts of the FW14B from Fujimi: an excellent kit, and essential on every modeler's shelf.

Set of decals featuring carbon fibre and kevlar patterns, specifically designed for the Tamiya Mazda 787B in 1/24 scale.

Very complete decal set with the carbon fibre patterns used in the Lamborghini Veneno.

This photoetched parts set also includes decals and fabrics for simulating harnesses.

There are some classics that never go out of style, and some of Tamiya's Gr.C kits, like the Le Mans winning Jaguar XJR-9, would fall into this category! Take advantage of this limited-time re-edition of the photo-etched plate with everything you need to detail this model. Grilles, radiators, brakes, and much more. Your XJR-9 will look very realistic!

Like a glove! That's the first thing that came to mind when we saw the set of photo-etched parts by Studio27 for the Lancia 037 Rally, The grilles on the front and rear hoods, the huge rear mud flaps, the brake discs, the front radiators, and some very useful templates to paint the Pirelli logos on the tires and on the rear grille, are just some of the parts that we can improve. The Lancia 037 will undoubtedly always be one of our favourites!

Interesting set of photo-etched parts to give even more detail to your Fujimi kit of the Ferrari Dino 246. Parts to improve the brakes, make a new front grille, or give volume to the instrument panel or the different identification plates of the chassis are just some examples. of everything you will find in this sheet. Essential!

Why fool us... we love the Ferrari GTO, with its powerful shapes, and in an era where the fight to have the fastest car was fierce. Can you imagine that as Gr.B it would have come to participate in a rally? Brutal. For those of you who love this car, and are looking forward to assemble the Fujimi kit, nothing better than accompanying its built with this set of photo-etched parts, improving some of the parts of the original kit, such as the air intake grilles, brake discs, pedals... and including details such as seat belts or the different chassis identification plates.

Time-limited re-edition of this photo-etched parts sheet for the Lancia Stratos HF Safari Rally.

You will be amazed since you first see just the box: it is humongous and filled up with parts. Wonderful!! A trully appealing scale model.

400ml bottle of fast drying fine pigment black synthetic lacquer primer. Includes a standard diffuser and a fine diffuser. This easy-to-apply primer with excellent coverage is recommended to apply before painting. It can be used over plastic or metal models. in both large and small surfaces. The container should be shaken for at least one minute before use.

As with the kit of the closed coupé version, the kit for the Targa variant, famous for the roof panels above the occupants' heads that can be removed, but keeping the full rear window and center pillar arch, has some careful details, such as the complete exploded view of its 3.2-liter boxer 6-cylinder engine, which allows versions to be made with both right and left-hand drive , and whose decal sheet includes license plates from up to 10 different countries. , plus the option of dealer plates with the suggestive word "Targa".

Reedition of the 1985 NS500 decals by Shunko, including tobacco logos and rider decals.

Reedition of the 1986 NSR500 decals by Shunko, including tobacco logos and rider decals.

High quality decals made in Japan to replace or complement those of the Tamiya kit. These decals belong to a limited reissue, so they will be available for a short time.

Time-limited re-edition of this decal set that includes all logos and tobacco sponsors of the Williams Renault FW14 and FW14B in 1/24 scale, specifically designed for replacing the old decals of your Hasegawa kit.