Newsletter 499: Cyber Monday 2021

This detail set will allow you to upgrade and detail the front bay of all Fiesta WRC cars versions since 2017 until 2021, both inclusive. Includes 13 high-quality resin parts, a decal sheet, a pre-cut polystyrene sheet, and detailed instructions.

This set includes the brake disc, hub, rim and tire for the asphalt version of the 2021 Ford Fiesta WRC with Pirelli tires, as used in Croatia, Ypress and other rallies.

This conversion set allows you to create the variation of the Ford Fiesta WRC that raced in 2021, with improved front and rear aerodynamic specifications. It features the 2019 rear bumper and mirrors, with the new side flaps and front fenders.

Here you have this incredible set, designed to create one of the best decorations of the Ford Fiesta WRC, the Fourmaux - Jamoul unit driven in 2021 at the Ypres rally. It features special edition Castrol logos with the names of company employees. The blue color of the decals has been carefully combined with the Tamiya TS-93 color, for the best possible result!

Here you have this incredible set, designed to create one of the best decorations of the Ford Fiesta WRC, the Fourmaux - Jamoul unit driven in 2021 in the Croatian and Kenyan rallies. It features special edition Castrol logos with the names of company employees. The blue color of the decals has been carefully combined with the Tamiya TS-93 color, for the best possible result!

With this tool you can replace the suspensions of your models by doing the springs yourself. Use the tool to twist a copper wire from 0.3 to 0.5mm, and use it on the supplied suspension parts, which are designed to be long enough to meet all kinds of needs. Simply cut down to size, paint, and assemble. The cooper wire is not included in the product.

Set of more than 800 rivets of 1 mm diameter in the upper head, with central hole.

Set of more than 800 rivets of 0.75 mm diameter in the upper head, with central hole.

Set of over 800 1mm diameter hex bolts: 400 bolt parts and 400 pats recreating a nut with protruding bolt and washer This set allows for great detail in suspension areas or anywhere a connection is made with a single bolt, with the start and end part.

Set of over 800 0,75mm diameter hex bolts: 400 bolt parts and 400 pats recreating a nut with protruding bolt and washer This set allows for great detail in suspension areas or anywhere a connection is made with a single bolt, with the start and end part.

This 20121 1/12 MotoJig Upgrade block set replaces ANY 2016 to 2019 wooden MotoJig blocks, to create a very strong, solid platform, immune to humidity, warping, or cracking. The set includes: 3 Blocks (3D Printed), 6 sets of screws, and 16 threaded inserts (already installed). Combine this with your existing rails and posts, and you have a state-of-the art new 2021 MotoJig!

Model kit based on the Ferrari 512S used by the official Ferrari team during the 1970 Le Mans 24 Hours. A complete and detailed model kit including white metal parts, resin, photo-etched parts, turned metal parts, rubber tires, water slide decals, 3D printed parts, etc. Among the 3D printed parts are all the rivets necessary for the exterior detailing of the bodywork, which once assembled allows the front and rear hoods to be removed, as well as the doors.

A curious mixed version of the Citroen B14 mixes the pick-up and the conventional tourism with a canvas roof. Heller allows us to make this model as it was done in real life, with the chassis with stringers, leaf spring suspensions, and the bodywork placed directly on the chassis. And in addition, also the engine and gearbox are reproduced.

Transkit for recreating the Volkswagen Vento using the Fujimi kit as a base. It corresponds to the body with a round front headlight grille.

Version with the rectangular headlights front grid.

Enhance the beauty and realism of Tamiya scale model with this set of two decal sheets with the carbon fiber patterns specifically designed by Studio27 for the RC213V.

Metallic white color, with a very peculiar appearance: the color looks plain white, but metallic glitter shows when the light changes.

White color tone as used in the Bugatti EB110 perfect to use with the Italeri model.

Bottle of silver paint similar to the tone used in the fantastic Porsche 917K sponsored by Martini in 1971. It is the perfect color to use in the Fujimi scale models.

Bottle with white paint similar to the tone used in the BMW 318i. It is the perfect color to use for Hasegawa scale models.

New Tameo scale model, with their fantastic quality as usual, this time recreating the 1952 Ferrari 375 Indianapolis as it raced the Indianapolis 500. We love it!!

Decoration for recreating the Porsche 911 SC by Antonio Zanini as raced in the 1980 Rally de Catalunya. It's design has been based on the Heller model in 1/24 scale,

Decoration for recreating the official team Porsche 961 sponsored by Rothmans during its participation in the 1987 edition of the 24 Hours of Le Mans.

Reedition of the 1985 NS500 decals by Shunko, including tobacco logos and rider decals.

Reedition of the 1986 NSR500 decals by Shunko, including tobacco logos and rider decals.

Resin model that focuses on the external appearance, without detailing the mechanical parts. Includes a complete photo-etched plate and aluminum rims to mount the versions of the Ferrari 340/375MM that raced at Le Mans in 1953.

New Meng motorcycle in 1/9 scale recreating the BMW HP4 RACE, The model features an inline four cylinder 999cc engine accurately reproduced, and also its carbon fiber frame using plastic parts and an exquisite set of CF pattern decals, already included in the kit. The front fork and rear shocks are fully operative as in the real vehicle, and the seat fabric is recreated with realistic vinyl.

Debut with victory. Can you ask for more? Yes, to be able to also do this version of the first world rally that the Lancia Delta S4 disputed, the RAC of England in 1985, where Henri Toivonen proclaimed himself the winner of the rally. Reji has prepared the livery to be used together with the Nunu/Beemax model of the Lancia Delta S4. The set includes the photoetched side supports of the rear wing of this version, as well as a second decal sheet with such interesting details as the tire logos or the drivers' names for the seats. Now all you have to do is choose the dirt and gravel wheels that you like the most among those available on our website!

In the last round of the 1986 World Rally Championship, which would also be the last in which Gr.B's were allowed, only one official Delta S4 was entered in the race, with the particularity that for commercial reasons in the USA, the usual Martini and Lancia Martini logos were replaced by those of Martini&Rossi. This special decoration has been recreated by Reji, being also the winning vehicle of the rally.

In the past, it was common for a vehicle to practically dominate the market, as happened with the Renault Estafette, which was widely used in many activities and by numerous companies, not only in France. The first series had an 845 cc engine derived from the one mounted in the Renault Dauphine, and that delivered 32 CV of power, which was more than enough for the needs of the time. This engine is faithfully reproduced in the model, which includes the decals to reproduce the one used in a bakery service, so it has a flat loading area free of other elements.

It is not the first example of an F1 driver running a rally, but it was surprising that in the current Formula 1 so professional Valtteri Bottas got permission to participate in the 2019 Arctic Rally... he must have liked it, because he repeated experiences in 2020 and 2021. Reji has reproduced in great detail the decoration of the Fiesta WRC with which the F1 driver would achieve the fifth final position of the rally. All you need to do is find the snow wheels, or at least the dirt wheels. To do this, it occurs to us that the reference KMP-TK24181, also available at SpotModel, could be worth it.

Perhaps the Portugal rally was one of the best for the Audi Quattro S1 in terms of performance in the 1985 season, with Röhrl and Blomqvist winning 28 of the rally's 47 stages, but bad luck with punctures on the last stage prevented Röhrl go beyond third place, after finishing the second stage leading comfortably. The decoration of this rally is precisely what Reji allows us to do with this decal sheet, with the numbers and license plates of the two drivers, and including the tobacco logos that the car carried in said rally.

P600 grit sandpaper sponge, perfect for preparing the bodies of your models, as well as medium-sized parts. You can use them both dry and wet if you need an even softer abrasion, and they are essential on the workbench of every modeler. The measurements of each sandpaper are 125 x 114 mm and P600 grit, and each package includes four units.