Newsletter 469: Full throttle

Full throttle

Full throttle
Our custom decal printing service works non-stop and we wanted to thank you once again for trusting us. The Print Lab was an idea that we started with great enthusiasm and hopes, but knowing how you, our dear customers, would react to it was a true mystery. And honestly, it is a great pleasure to see how you put the very same enthusiasm and hopes into it :)

We receive the most varied designs: for cars, for trains, for airplanes... For private use or to publish them so that other modelers can enjoy them. Thanks to the designs that you make public, many civilian scale modeling fans can enjoy those decorations that are less "commercial" yet undoubtedly interesting, cool and exclusive.

We wish and hope that you keep on enjoying this service, and we are open to your suggestions and comments to continue improving.

At SpotModel, we grow thanks to you ;)

Print Lab Decals: Marking / livery 1/27 scale - Mercedes AMG GT3 ROFGO Team sponsored by Gulf #31 - 12 Hours Silverstone - water slide decals manufactured with digital technology

Print Lab Decals Reference: PLB2-796164

Decoration to be used on the Kyosho mini-Z of the Mercedes-AMG GT3 (reference MZN198) that will allow you to recreate the car with number # 31 sponsored by Gulf that raced in 2018 at the 12 Hours of Silverstone.
Click here for more details

Print Lab Decals: Marking / livery 1/43 scale - Porsche 997 GT3 RSR Falken Tire Team #17 - Petit Le Mans 2013 - water slide decals manufactured with digital technology

Print Lab Decals Reference: PLB2-964757

Decals of the winner in his category at the 2013 Petit Le Mans. They can be used on Spark diecasts with references S3735, S3737, S3776, S3780, S3781 or S4232.
Click here for more details

Renaissance Models: Marking / livery 1/24 scale - Mitsubishi Lancer Evolution IV Mitsubishi RalliArt Team #1, 2 - Tommi Mäkinen + Seppo Harjanne, Tommi Mäkinen + Risto Mannisenmäki, Richard Burns + Robert Reid - Monte Carlo Rally - Rallye Automobile de Monte-Carlo 1997 and 1998 - water slide decals, assembly instructions and painting instructions - for Hasegawa references 20310, 25072 and CR-112

Renaissance Models Reference: TK24-477

Decal sheet with everything necessary to make the version of the Mitsubishi Lancer Evo IV Group A with which Tommi Mäkinen participated in the 1997 and 1998 editions of the Monte Carlo rally, wearing the number #1 in both cases, getting a third place in 1997 and leaving in 1998, in what was the premiere with his new co-driver. The decal sheet also makes it possible to make the second unit, renamed Carisma, used by Richard Burns in the same rally in 1998, an edition in which the names of the drivers also began to be seen on the side rear windows.
Click here for more details

Model Factory Hiro: Car scale model kit 1/43 scale - Ferrari 126C2 Scuderia Ferrari Team sponsored by Fiat Agip #27, 28 - Gilles Villeneuve, Didier Pironi - San Marino Formula 1 Grand Prix 1982 - photo-etched parts, vacuum formed parts, water slide decals, white metal parts and assembly instructions

Model Factory Hiro Reference: MFH-K767

The MFH Ferrari 126C2 is a delight. A complete and detailed kit where multiple materials are combined such as white metal, photo-etched plate, rubber tires, aluminum rims, colored semi-transparent resin air ducts and a sheet of decals. All this allows the original vehicle to be reproduced down to the smallest detail. The top cover can be removed, allowing a full view of the detailed interior and engine/gearbox assembly. This specific version is the one that ran in the 1982 San Marino GP, not using a front spoiler and mounting reduced in size front brake refrigeration ducts.
Click here for more details

Model Factory Hiro: Car scale model kit 1/43 scale - Ferrari 126C2 Scuderia Ferrari Team sponsored by Fiat Agip #27 - Gilles Villeneuve - Belgian Formula 1 Grand Prix 1982 - photo-etched parts, vacuum formed parts, water slide decals, white metal parts and assembly instructions

Model Factory Hiro Reference: MFH-K768

The MFH Ferrari 126C2 is a delight. A complete and detailed kit where multiple materials are combined such as white metal, photo-etched plate, rubber tires, aluminum rims, colored semi-transparent resin air ducts and a sheet of decals. All this allows the original vehicle to be reproduced down to the smallest detail. The top cover can be removed, allowing a full view of the detailed interior and engine/gearbox assembly. This particular version is the one that participated in the training sessions for the 1982 Belgian GP, in what was Villeneuve's last outing on the track, mounting a front spoiler, radiators of different size and small front brake ventilation ducts.
Click here for more details

Model Factory Hiro: Material - Circular aluminium brushed - large pattern - other materials

Model Factory Hiro Reference: MFH-P1091

Sticking sheet with a circular brushed aluminum look, measuring 18 x 15 cm.
Click here for more details

Model Factory Hiro: Chain set 1/9 scale - Chain - photo-etched parts, white metal parts and assembly instructions

Model Factory Hiro Reference: MFH-P1099

Hyper realistic chain to be assembled one link at a time. Your 1/9 motorbike scale models will look MUCH more realistic once you equip them with this beauty.
Click here for more details

Model Factory Hiro: Material - Heat protection shield - 150 x 180 mm - other materials

Model Factory Hiro Reference: MFH-P928

Adhesive material similar in appearance to the thermal protection blankets used in modern GTs, motorcycles and Formula 1. A 150 x 180mm sheet is served, featuring a material that has a slight raised texture to increase the realism of your models.
Click here for more details

Tamiya: Motorbike scale model kit 1/12 scale - Honda NSR500 HRC Honda Racing Corporation Team #3 - Keiji Kinoshita - All Japan Road Race Championship 500cc 1986 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Tamiya Reference: TAM14099

Same bike (and scale kit) as the one used in the 1986 World Championship by Wayne Gadner, but with HRC colors for the Japanese domestic championship, where he won the 500cc title, after 5 years without doing so. An exquisite model with a fully detailed chassis and engine.
Click here for more details

Tabu Design: Marking / livery 1/20 scale - Ferrari 641/2 F1-90 Scuderia Ferrari Team sponsored by Marlboro #1, 2 - Nigel Ernest James Mansell, Alain Prost - FIA Formula 1 World Championship 1990 - water slide decals and tobacco sponsor decals - for Fujimi references FJ090375, GP5 and FJ090436

Tabu Design Reference: TABU20045

Here are the tobacco sponsor logos, plus several other decals not included in the Fujimi Ferrari 641/2 F1-90 model kit, such as tire stickers, thermal stickers, FIA homologation sticker, driver's badges with their names (in fluorescent ink), etc.
Click here for more details

Heller: Car scale model kit 1/24 scale - Mercedes 500 K Special Roadster 1934 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Heller Reference: 80710

Elegant and fluid lines, luxurious finish and outstanding performance. This is how the Mercedes 500K was advertised in its time... an object of desire. Now it can also be yours, albeit to scale, thanks to this Heller kit, where the engine, chassis and interior have been reproduced in detail. Both the doors and the engine covers can be mounted so that they are open, as they are independent parts of the bodywork.
Click here for more details

Meng Model: Car scale model kit 1/24 scale - Ford GT40 Mk II Shelby American Team #1, 2, 5 - Denis Clive 'Denny' Hulme + Ken Miles, Bruce McLaren + Chris Amon, Ronnie Bucknum + Dick Hutcherson - 24 Hours Le Mans 1966 - paint masks, photo-etched parts, plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Meng Model Reference: CS-004

Finally we can have in our showcase a 1/24 scale plastic model of the Ford GT40 Mk II with the engine exploded. Good!!!!! In addition, the central part of the front hood is practicable to show the spare wheel, the fuel tank, etc... And also, you can choose between the 3 versions that the decals allow you to build. Are you one of those who prefer the winner of the race, the number #2, the legendary Gulf with the number #2 that came second and even more famous for the movie "Le Mans 66", or do you prefer the spectacular golden version of third place, with the number #5? Regardless of which one you choose, it is undoubtedly an essential reference in your collection.
Click here for more details

Tabu Design: Marking / livery 1/12 scale - Williams Renault FW14B sponsored by Camel, Courses Inc, Racing Service - water slide decals and tobacco sponsor decals - for Tamiya reference TAM12029

Tabu Design Reference: TABU12017R

As has been customary for a few years, many of our models do not include those corresponding to tobacco advertising on their decal sheets. as it happens with the Tamiya Williams FW14B at 1/12 scale. If you want to include Camel advertising in your model, this decal sheet will be more than useful. And so that nothing is missing, the logos of Courses Inc. and Racing Service are also included, messages that replace Camel's camel in some races, such as the 1992 Magny Cours,
Click here for more details

Tabu Design: Marking / livery 1/20 scale - Williams Renault FW14B Williams Grand Prix Engineering Team sponsored by Camel - Nigel Ernest James Mansell - FIA Formula 1 World Championship 1992 - water slide decals and tobacco sponsor decals - for Fujimi references FJ090528, 09052, GP-17, FJ090702, 09070, GP-24, FJ090757, 09075, GPSP-13, FJ090795, 09079 and GP-26

Tabu Design Reference: TABU20077R

You must have missed some of the sponsor logos on the decal sheet of your Fujimi kit of the Williams FW14B. If you are one of those who want to recreate the complete decoration, including the tobacco logos, this additional decal sheet is what you need.
Click here for more details

Italeri: Car scale model kit 1/24 scale - Volvo 760 GLE - plastic parts, rubber parts, water slide decals and assembly instructions

Italeri Reference: 3623

Re-edition of the veteran Italeri mold, which at the time was already re-edited by Revell and Testors. These are the same molds, injected again, and with the decals printed again. The model allows you to choose to leave the front hood closed, or separate it to have a view of the engine, whose upper half is detailed on a flat base.
Click here for more details

Italeri: Tractor head scale model kit 1/24 scale - Iveco Turbostar 190.48 Special - plastic parts, rubber parts, water slide decals and assembly instructions

Italeri Reference: 3926

Italieri presents us with another of the great "monsters" of the road, the Iveco Turbostar, with a decal sheet that allows us to make the versions with yellow or red stripes. A complete exploded view of the entire chassis and cabin will delight the most demanding modellers.
Click here for more details

Bad Wolf Miniatures: Figure 1/43 scale - Taxi Ride 2 - Ayrton Senna da Silva + Nigel Ernest James Mansell - British Formula 1 Grand Prix - 3D printed parts - for Tameo Kits references TMK138 and TMK148

Bad Wolf Miniatures Reference: BW43013

Drivers from the 90s returning to the pits. It is based on the figures of Nigel Mansell and Ayrton Senna at the end of the 1991 British Grand Prix. These figures are designed for use with the Tameo FW14.
Click here for more details

Bad Wolf Miniatures: Figure 1/43 scale - Podium Shoey - Daniel Ricciardo - 3D printed parts

Bad Wolf Miniatures Reference: BW43014

Driver celebrating victory on the podium with a bottle of champagne. It is based on the figure of Daniel Ricciardo. Includes a green resin champagne bottle.
Click here for more details

Bad Wolf Miniatures: Figures set 1/43 scale - Drivers arguing - Jean Alesi + Pierluigi Martini - Hungarian Formula 1 Grand Prix - 3D printed parts - for Tameo Kits references TMK138 and TMK148

Bad Wolf Miniatures Reference: BW43015

Drivers from the 90's arguing. It is based on the figures of Jean Alesi and Pierluigi Martini at the 1990 Hungarian Grand Prix.
Click here for more details