Newsletter 462: Renntransporter

Parts to transform the Hasegawa model of the Volkswagen Transporter to the long platform version ("Renntransporter"). Includes lift ramps, complete deck, side panels, and hydraulics.

Set of 3 steering wheels in 1/43 scale, with four spokes, similar to those used in classic rally cars. They are made with 3D printing, with a diameter of 8.1mm.

Set of 3 steering wheels in 1/43 scale, with three spokes, similar to those used in classic rally cars. They are made with 3D printing, with a diameter of 8.1mm.

Set of 3 steering wheels, in 1/43 scale, with three spokes, similar to those used in classic rally cars. They are made with 3D printing, with a diameter of 8.1mm.

Set of 3 steering wheels, in 1/43 scale, with three spokes, similar to those used in classic rally cars. They are made with 3D printing, with a diameter of 8.1mm.

Set of 3 steering wheels, in 1/43 scale, with two spokes, similar to those used in classic rally cars. They are made with 3D printing, with a diameter of 8.1mm.

Set of 4 steering wheels, in 1/43 scale, with four, three (2 different versions) and two spokes, similar to those used in classic rally cars. They are made with 3D printing, with a diameter of 8.1mm. It includes one unit of each of the following references: DAB43-013, DAB43-014, DAB43-015 and DAB43-016.

Set of 4 steering wheels in 1/43 scale, with four (1 version) and three spokes (3 versions), similar to those used in classic rally cars. They are made with 3D printing, with a diameter of 8.8mm.It includes one unit of each of the referencess DAB43-013, DAB43-014, DAB43-015 and DAB43-016.

Set of 3 steering wheels in 1/43 scale, similar to those used in classic racing cars. They are made with 3D printing, with a diameter of 8.8mm.

Set of 3 steering wheels, in 1/43 scale, similar to those used in classic racing cars. They are made with 3D printing, with a diameter of 8.8mm.

Set of with 3 steering wheels, in 1/43 scale, similar to those used in classic racing cars. They are made with 3D printing, with a diameter of 8.8mm.

Set of 3 steering wheels, in 1/43 scale, similar to those used in classic racing cars. They are made with 3D printing, with a diameter of 8.8mm.

Set of 4 steering wheels, in 1/24 scale, similar to those used in classic race cars. They are made with 3D printing, with a diameter of 15 and 17.1mm depending on the model. It includes one unit of each of the references DAB24-007, DAB24-008, DAB24-009 and DAB24-010.

Set of 3 steering wheels, in 1/24 scale, similar to those used in classic race cars. They are made with 3D printing, with a diameter of 15.8 mm.

Set of 3 steering wheels, in 1/24 scale, similar to those used in classic race cars. They are made with 3D printing, with a diameter of 15.8 mm.

Set of 3 steering wheels, in 1/24 scale, similar to those used in classic race cars. They are made with 3D printing, with a diameter of 15 mm.

Set of 3 steering wheels, in 1/24 scale, similar to those used in classic race cars. They are made with 3D printing, with a diameter of 17.1 mm.

Set of 3 steering wheels, in 1/24 scale, similar to those used in classic rally cars. They are made with 3D printing, with a diameter of 14.5 mm.

Set of 3 steering wheels, in 1/24 scale, similar to those used in classic rally cars. They are made with 3D printing, with a diameter of 14.5 mm.

Set of 3 steering wheels, in 1/24 scale, similar to those used in classic rally cars. They are made with 3D printing, with a diameter of 14.5 mm.

Set of 3 steering wheels, in 1/24 scale, similar to those used in classic rally cars. They are made with 3D printing, with a diameter of 14.5 mm.

Set of 3 steering wheels, in 1/24 scale, similar to those used in classic rally cars. They are made with 3D printing, with a diameter of 14.5 mm.

Set of 4 steering wheels, in 1/24 scale, similar to those used in classic rally cars. They are made with 3D printing, with a diameter of 14.5 mm. Includes one unit of each of the references DAB24-012, DAB24-013, DAB24-014 and DAB24-015.

Elegant and fluid lines, luxurious finish and outstanding performance. This is how the Mercedes 500K was advertised in its time... an object of desire. Now it can also be yours, albeit to scale, thanks to this Heller kit, where the engine, chassis and interior have been reproduced in detail. Both the doors and the engine covers can be mounted so that they are open, as they are independent parts of the bodywork.

Drivers from the 90s returning to the pits. It is based on the figures of Nigel Mansell and Ayrton Senna at the end of the 1991 British Grand Prix. These figures are designed for use with the Tameo FW14.

Driver celebrating victory on the podium with a bottle of champagne. It is based on the figure of Daniel Ricciardo. Includes a green resin champagne bottle.

Drivers from the 90's arguing. It is based on the figures of Jean Alesi and Pierluigi Martini at the 1990 Hungarian Grand Prix.

Driver lying on the ground, hands over his face, looking desperate. It is based on the George Russell figure at the 2020 Sakhir Grand Prix. Includes the helmet and two Hans devices.

Driver sitting on the ground after finishing the race. It is based on the figure of George Russell at the 2021 Emilia Romagna Grand Prix.

Driver sitting in a chair resting while sunbathing. It is based on the figure of Fernando Alonso in the 2015 Brazilian Grand Prix. It includes the driver, the helmet, the saddle chair, and two Hans devices.

Limited series of the Hasegawa Porsche 962C scale kit, this time with the incredible Fat International decoration used by the Brun team in the 1000 Kms of Spa Francorchamps, ninth round of the 1987 World Sport Prototype Championship, achieving third position final. The kit does not have any new parts compared to other versions of the Hasegawa 962C, except for the aforementioned decals.

Limited edition of the kit of the Lancia Delta HF Integrale 16V Evo, this time with the livery used by Tommi Mäkinen during his participation in the 1993 1000 Lakes Rally, in which he demonstrated his class with a car that was already out of date with respect to the competition finishing a fantastic fourth position. Regarding other references of the same Hasegawa model, the only change is the new decal sheet and the incorporation of 8-arm dirt wheels already seen in other models of the same manufacturer.