Newsletter 451: Merry Christmas!

Marlboro logos not included on BMW 320i E46 kit by Nunu.

Pre-thinned paint bottle ready for airbrush use, including 30ml of product. It has been formulated to match the blue tone used in the Hyundai i20 WRC.

Mini Cooper Factory and Privateer race and rally liveries. 6 complete and different cars can be made with this sheet. Tamiya and Revell kits to be used.

Design including three decorations for use in 1/24 scale corresponding to Nichimo's Alpine Renault A310 1800 during his participation in the 1976 Portugal RAlly with Jean Ragnotti and Jacques Jobert, both of which retired due to an accident; the Renault R8 Gordini by Heller / Humbrol / Wave / Unión in their participation in the TAP International Rally in 1967 with José Carpinteiro Albino and António Silva Pereira (winners); and for the Morris Mini Cooper S by Tamiya in its participation in the TAP International Rally in 1968 with Vítor Colaço Marques and Diogo Reis, who had to abandon the event.

Decoration of the Audi Quattro Rally winner of the 1982 Rally de Portugal - Vinho do Porto with Michele Mouton and Fabrizia Pons at the controls. It is designed for use with the Tamiya kit.

Decoration of the Audi Quattro in its first appearance in a rally, the Rallye do Algarve in 1980, with Hannu Mikkola and Arne Hertz. This time he was "car 0" and turned out being 30 minutes faster than the winning car of the rally.

Decals for two decorations. The first is from the MG Metro 6R4 in its participation in the 1986 Rally Portugal with Malcom Wilson and Nigel Harris and also for the machine driven by Tony Pond and Arthur Rob, both retired like all the machines of group B. On the other hand you can perform the decoration of the Toyota Celica TA64 but at the Portugal Rally 1984, with Juha Kankkunen and Fred Gallager who also had to retire due to a broken steering. For both decorations you need to use part of the original decals of the models.

Decorations for use with the Mini-Z Mercedes AMG GT3 with reference MZN198. The first corresponds to the number 4 of the Black Falcon Team Langstrecke in its participation in the 24 Hours of Nurburgring in 2016. The second corresponds to the number 33 of the WeatherTech Team in the race of the 12 hours of Sebring held in the year 2017.

Pre-thinned paint bottle ready for airbrush use, including 30ml of product. It has been formulated to match the blue and orange tones used in the Ford GT40 cars sponsored by Gulf.

Pre-thinned paint bottle ready for airbrush use, including 30ml of product. It has been formulated to match the white tone used in the Ford Mustang GT4.

Pre-thinned paint bottle ready for airbrush use, including 30ml of product. It has been formulated to match the grey tone used in the Ford Mustang GT4.

History is not always written by the winners, and the Moynet is a case in point. Not only were its drivers exclusively female, with Michele Mouton being the best known, but it also took victory among vehicles up to 2 liters in displacement, thanks to its 1994cc Simca-JRD engine. As usual, Profil has managed to faithfully reproduce all the details of the real model, including the small engine that is visible through the rear transparent cover. The photos that include the instructions are undoubtedly of great help to finish detailing the model.

Shunko Models is well know by their immaculate and impressive decal designs. Here is once again another great example of it: bright and really intense colors, and Peugeot team blues, reds and yellows are... excellent!!

High quality silkscreen printed decals made in Japan. This decal is limited production

High quality decals made in Japan. These decals belong to a limited series, so they will be available for a short time. They have been designed to replace the original Tamiya decals of the Ferrari F1 2000 kits.

The use of high-level motor sports for advertising upcoming film releases was beginning to become fashionable, and in 2004, on the occasion of the premiere of Spiderman 2, a decoration reminiscent of Spider-man's suit and cobwebs could be seen so famous superhero on Melandri's Yamaha. This did not bring much luck to the rider in the Portuguese GP, as he crashed on lap 7... Renaissance has recreated such a curious decoration with a decal sheet that imitates the different frames with an aluminum finish to place them on the previously painted fairing. Spectacular!

Decoration for the Tamiya scale model of the Porsche 911 993 GT2, so that you can recreate the vehicle that raced with the number 72 in the 24 Hours of Le Mans 24 in 1998.

Spare wiper blades for the Revell Ford GT detailing set. It can also be used with other modern GTs or directly on the Revell kit.

Rubber made rain tyres, perfect for your MotoGP scale models in 1/12 scale. Front tire measures 48mm outer diameter, 36mm inner diameter, and 10,5mm wide. Rear tire measures 52,5mm outer diameter, 36mm inner diameter, and 15,8mm wide.

An interesting scale model kit by Revell, featuring an excelent part break up, good fittngs, and many welcomed details such as the possibility of leaving doors and trunk open. We built it and it was reaaaaally fun. The kit is classified by Revell as a Skill Level 4, for high experienced modelers.

Fantastic detail up set made up of several photo-etched plates, masks and 3D-printed resin parts to detail and update the different references of the 1/12 scale Tamiya model of the Porsche 934 Turbo RSR Group 4.

Fantastic set of photo-etched parts for improving the Fujimi Porsche 911 997 GT3R in 1/24 scale. It includes the air vented brake discs, the rear spoiler bracket, grilles, pedals, etc.

Fantastic set of photo-etched parts to improve the Porsche Carrera RSR Turbo in 1/24 scale by Fujimi. Includes templates to paint the tires, harnesses, pedals, windshield wipers, hood latches, grilles, ... all executed in photoengraving. You will also find harness fabric and paint masks for the glass frames.

High quality decals made in Japan. These decals belong to a limited series, so they will be available for a short time. They have been designed to replace the original Tamiya decals of the McLaren Honda MP4/7 kit. Of course, it also includes the decals with the Marlboro sponsor missing on the original decal sheet of the model.

Decals for the 1/12 scale model kit of the McLaren Honda MP4/6 by Tamiya. Includes tobacco logos.

Decals newly designed to replace those of the McLaren Honda MP4/4 Tamiya kit in 1/20 scale. One of the most relevant aspects is that it includes tobacco advertising, not present in some of the versions of the kit, and as a curious fact for fans of the Italian driver, the names of the test driver, Emanuele Pirro, are included.

Newly designed decals for replacing those of the McLaren Honda MP4/5B kit by Tamiya in 1/20 scale, including tobacco sponsors.

A multi scale sheet that allows you to build 1/24 + 1/32 + 1/43 scale 917K of David Piper's team at Le Mans in 1970

A multi scale sheet that allows you to build 1/24 + 1/32 + 1/43 scale 917K of David Piper's team at two races in 1970

A multi scale sheet that allows you to build 1/24 + 1/32 + 1/43 scale 917K of David Piper's team at the Watkins Glen USA world endurance championship race in 1970, shining in the famous green livery that Piper was known for.

Are you going to assemble Nunu's DTCC BMW 320i E46 kit? Well in that case you should definitely use this detail up set in your model. Inside you will find photo-etched parts to improve the brake discs, the windshield wipers, the front grille, the hood latches, the harness buckles, etc. In addition, material is included to execute the belts, the antenna made of turned metal, and additional decals with the carbon patterns for various pieces as well as the Marlboro logos (which are NOT included in the original kit). What is it worth?

The dimensions of the model once assembled are 198 mm long, 91 mm wide, and 60 mm high. The bodywork is made up of a central monocoque to which the exterior panels are added, just like in the real car. It includes a fully detailed engine, and can be assembled either its European, North American or Japanese versions.