Newsletter 448: Treat yourself and be amazed

Treat yourself and be amazed

Treat yourself and be amazed
Very special dates are arriving, in which we all want to show our affection and closeness to the people that we love, sharing good times and, of course, giving away some detail that makes them feel that we have them in our mind and in our heart. But... what about you? Don't you love yourself?

And we have thought: what could we do at SpotModel to make you feel us a little closer in Christmas? Well, we are going to tell you: we have created for you a very special product, which will be available for time and limited units, which is called SpotModel Magic Box . It consists of a mystery gift-wrapped box containing an article exclusively created by SpotModel, as well as some other surprises... Take one, you'll be giving yourself a present and a surprise :D

We would love you to place it under the Christmas tree and open it at that moment you feel as the most special for you on these dates and thus, in some way, we could be sharing it with you :)

Of course you can also send a magic box to your scale modeling friends, and take for granted you will make them really happy!!

Happy Holidays with SpotModel :D

SpotModel: Material - SpotModel Magic Box - other materials

SpotModel Reference: MAGIC-BOX

This is a product that we have created especially for you . It will be available for a limited time and units and consists of a gift-wrapped mystery box that contains an item exclusively created by SpotModel , as well as some other surprises... Take one, you'll be giving yourself a present and and a surprise!
Click here for more details

Fujimi: Car scale model kit 1/24 scale - Ferrari 250 GTO - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Fujimi Reference: FJ123370

The GTO was the king of Gran Turismos at the beginning of the 1960s. In fact, it won three world championships for makes for the Maranello-based company. Fujimi has reproduced this mythical model in a fantastic model that includes the car's chassis, complete engine and gearbox, as well as the interior, in great detail. So hurry, as it will be available in limited time and units.
Click here for more details

StreetBlisters: Paint for airbrush - Honda Granada Black Pearl - 1 x 30ml

StreetBlisters Reference: SB30-0286

Pre-thinned paint bottle ready for airbrush use, including 30ml of product. It has been formulated to match the black tones used in the Honda Del Sol, Integra, Civic, etc.
Click here for more details

Scale Motorsport: Detail up set 1/24 scale - Toyota Corolla WRC - photo-etched parts - for Tamiya reference TAM24209

Scale Motorsport Reference: SM3015

Set of photo-etched parts for giving a touch of realism to the Toyota Corolla WRC scale model by Tamiya, including, among other things, the radiator grilles, tow hooks, bonnet pins, brake discs, etc.
Click here for more details

LB Production: Logotypes 1/24 scale - Tire sidewall white chalk markings - water slide decals

LB Production Reference: LB-24024

Decal with various numbers and marks made in white chalk, very common on racing tires before going out to the track.
Click here for more details

LB Production: Marking / livery 1/24 scale - Audi R8 LMS GT3 Land Motorsport Team sponsored by Montaplast #28, 29 - Stphane Ortelli + Christopher Haase, Frederic Vervisch + Peter Hoevenaars, Christopher Mies + Connor De Phillippi - ADAC GT Masters 2016 - water slide decals and assembly instructions - for Nunu references PN24004, NU-24004, PN24004, NUNPN24004, PN24024, PN-24024, PN24028 and NU24028

LB Production Reference: LB-24028

Maybe it wasn't the fastest, but it was the most regular. A single victory, accompanied by another six podium finishes, earned the Land Motorsport team the 2016 ADAC GT Master champion, while also taking over the VLN series with the endurance races held exclusively at the Nrburgring. A beautiful decoration full of green tones that LB Production has reproduced with great accuracy, and that lovers of modern GTs will certainly appreciate.
Click here for more details

LB Production: Marking / livery 1/24 scale - BMW 320i E46 Ravaglia Motorsport BMW Team Germany Team sponsored by Mauri, Beretta #1, 2 - Peter Kox, Norman Simon - European Super Production Championship 2001 - water slide decals and placement instructions - for Nunu references PN24007 and NU-24007

LB Production Reference: LB-24029

In 2001 there was a second category in the European Touring Car Championship, called the Super Production Championship. Peter Kox, riding for the BMW team Germany, dominated the championship, claiming victory after 3 wins and as many second places in 10 races. Using Nunu's BMW 320i E46 as a base, LB Production gives us the option of recreating this model with high-quality decals, with the logos and numbers of the two team cars.
Click here for more details

LB Production: Marking / livery 1/24 scale - BMW 320i E46 Schubert Motorsports Team sponsored by Vlpker Montanwachs #8, 44 - Markus Gedlich - Guia Race of Macau, DTC Deutsche Tourenwagen Cup 2001 - water slide decals and assembly instructions - for Nunu references PN24007 and NU-24007

LB Production Reference: LB-24030

Two decorations in one for the BMW 320i of the Schubert team, used during the 2001 season in different categories and championships that used the vehicles of the Super Production category. We love this decoration not only for its definition, but also for some of its details, such as the scheme of the roof of the German Motopark Oschersleben circuit, or the spark plugs that peek out from behind the door numbers. The mythical Macau or the DTC champion? Matter of taste.
Click here for more details

Nunu: Car scale model kit 1/24 scale - Audi Sport Quattro S1 Audi Sport Team #5 - John Buffum + Neil Wilson - Toyota Olympus Rally 1986 - plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Nunu Reference: PN24023

Model of the Audi Sport Quattro S1 Gr.B, based on the model of the Sport Quattro E2 from the same manufacturer. It has a new mold for the body, with new wings and fenders, as well as new wheels with the design used in gravel rallies, although the slick tires do not correspond to the Olympus rally version, contested entirely on gravel. A very good base to use with the different decorations used by the works Audi team in the rest of the world championship rallies.
Click here for more details

Top Studio: Detail up set 1/12 scale - Williams Renault FW14B - photo-etched parts, turned metal parts, other materials and assembly instructions - for Tamiya reference TAM12029

Top Studio Reference: TD23259

Photo-etched and milled parts for detailing the rear spoiler, front spoiler, and the flat bottom of the 1/12 scale Williams Renault FW14B model kit.
Click here for more details

Top Studio: Nuts - Hex fitting 1.0mm for hydraulic pipes - metal parts - 10 units

Top Studio Reference: TD23260

Set of ten 1.0mm hex nuts, mainly used for hydraulic fittings.
Click here for more details

Top Studio: Nuts - Hex fitting tapered 1.1mm for hydraulic pipe joints - metal parts - 10 units

Top Studio Reference: TD23261

Hexagonal nut 1.1mm wide, 1.7mm high, and 0.7mm inner diameter, perfect for simulating fittings and all types of hydraulic pipe joints.
Click here for more details

Top Studio: Detail 1/20 scale - Oxygen sensor - photo-etched parts, turned metal parts and other materials - 4 units

Top Studio Reference: TD23262

Set of lambda sensors for measuring oxygen in the exhaust pipes of modern vehicles. Includes turned metal parts, wiring and photo-etched parts for recreating four units in 1/20 and 1/24 scale.
Click here for more details

Top Studio: Detail 1/12 scale - Oxygen sensor - photo-etched parts, turned metal parts and other materials - 4 units

Top Studio Reference: TD23263

Set of lambda sensors for measuring oxygen in the exhaust pipes of modern vehicles. Includes turned metal parts, wiring and photo-etched parts for recreating four units in 1/12 scale.
Click here for more details

Top Studio: Detail 1/12 scale - Bleed nipple screws - CNC metal parts - 10 units

Top Studio Reference: TD23264

Hydraulic bleeder set for 1/12 scale, made of turned and machined metal. They are a tiny little marvel!! You can use them in brake calipers, levers, brake pistons, etc.
Click here for more details

Top Studio: Detail 1/20 scale - Bleed nipple screws - CNC metal parts - 10 units

Top Studio Reference: TD23265

Hydraulic bleeder set for 1/20 and 1/24 scale, made of turned and machined metal. They are a tiny little marvel!! You can use them in brake calipers, levers, brake pistons, etc.
Click here for more details

Top Studio: Air valve 1/12 scale - Air valves - CNC metal parts - 5 units

Top Studio Reference: TD23266

Set of five inflation valves recreated in 1/12 scale, made of turned and milled metal.
Click here for more details

Top Studio: Detail 1/12 scale - Banjo fitting - CNC metal parts - 10 units

Top Studio Reference: TD23267

Set of six complete banjo type fittings recreated in 1/12 scale, made of turned and machined metal, perfect for completing and improving the hydraulic fittings of your scale model cars, trucks and motorcycles.
Click here for more details

Top Studio: Detail 1/12 scale - Banjo fitting - CNC metal parts - 10 units

Top Studio Reference: TD23268

Set of ten banjo type fittings recreated in 1/12 scale, made of turned and machined metal. They are perfect for completing and improving the hydraulic fittings of your scale model cars, trucks and motorcycles.
Click here for more details

Top Studio: Detail 1/12 scale - Banjo fitting - CNC metal parts - 10 units

Top Studio Reference: TD23269

Set of ten banjo type fittings recreated in 1/12 scale, made of turned and machined metal. They are perfect for completing and improving the hydraulic fittings of your scale model cars, trucks and motorcycles.
Click here for more details

Top Studio: Detail 1/12 scale - Banjo fitting set - CNC metal parts and other materials - 6 units

Top Studio Reference: TD23270

Set of six complete banjo type fittings recreated in 1/12 scale, made of turned and machined metal, perfect for completing and improving the hydraulic fittings of your scale model cars, trucks and motorcycles.
Click here for more details

Top Studio: Detail 1/12 scale - Banjo fitting set - CNC metal parts and other materials - 6 units

Top Studio Reference: TD23271

Set of six complete banjo type fittings recreated in 1/12 scale, made of turned and machined metal, perfect for completing and improving the hydraulic fittings of your scale model cars, trucks and motorcycles.
Click here for more details

Top Studio: Detail 1/12 scale - Banjo fitting set - CNC metal parts and other materials - 6 units

Top Studio Reference: TD23272

Set of six complete banjo type fittings recreated in 1/12 scale, made of turned and machined metal, perfect for completing and improving the hydraulic fittings of your scale model cars, trucks and motorcycles.
Click here for more details

Top Studio: Nuts - Hex nuts 0.5mm - metal parts - 10 units

Top Studio Reference: TD23246

0.5mm wide hex nut and 0.4mm shank made of metal. Product from the "Hex Rivet (C) Silvery" range.
Click here for more details

Top Studio: Nuts - Hex nuts 0.6mm - metal parts - 10 units

Top Studio Reference: TD23247

0.6mm wide hex nut and 0.4mm shank made of metal. Product from the "Hex Rivet (C) Silvery" range.
Click here for more details

Top Studio: Nuts - Hex nuts 0.7mm - metal parts - 10 units

Top Studio Reference: TD23248

0.7mm wide hex nut and 0.4mm shank made of metal. Product from the "Hex Rivet (C) Silvery" range.
Click here for more details

Top Studio: Nuts - Hex nuts 0.8mm - metal parts - 10 units

Top Studio Reference: TD23249

0.8mm wide hex nut and 0.5mm shank made of metal. Product from the "Hex Rivet (C) Silvery" range.
Click here for more details