Newsletter 444: Quattro Sport

Model of the Audi Sport Quattro S1 Gr.B, based on the model of the Sport Quattro E2 from the same manufacturer. It has a new mold for the body, with new wings and fenders, as well as new wheels with the design used in gravel rallies, although the slick tires do not correspond to the Olympus rally version, contested entirely on gravel. A very good base to use with the different decorations used by the works Audi team in the rest of the world championship rallies.

If the actual car is gorgeous, the scale model is even more! Pay special attention to the rain tyres included in this kit: they are simply awesome! And don't forget to also throw in the tobacco decals, since they're not included in the original.

The 1970 LeMans winner, now reedited by Fujimi in one of their classic and most renowned kits without any doubts. Reminder: the kit does NOT include a detailed engine.

Here's the reedition of this classic Fujimi kit of the winner of Le Mans 24 hours in 1968. A gorgeous machine in Gulf colours, that you can decorate with three different numbers. This kit does not allow you an open assembly for the door or bonnet, and it does not include a detailed engine either.

Here's the reedition of this classic Fujimi kit of the 1996 Le Mans 24 hours winner. A gorgeous machine in black colors, also including some photoetched parts. This kit does not allow you an open assembly for the doors or bonnet, and it does not include a detailed engine either.

New volume of the Komakai "Fast Guides" series, this time about the Mazda 787B, with a total of 32 full-color A5 pages. It is the perfect reference book for assembling the Fujimi model.

New volume of the Komakai "Fast Guides" series, this time about the Volkswagen Polo WRC, with a total of 32 full-color A5 pages. It is the perfect reference book for assembling the Fujimi model.

Kawasaki Ninja H2 Carbon windshield made of 0.2mm transparent laminated material, for replacing the transparent plastic parts of your kit. You will achieve a more realistic look on your kit, both for the reduced thickness (much closer to reality on that scale than the original transparent part) as well as for its shininess and transparency. Windshield comes already cut, fitting your model perfectly without any additional cutting.

Tire sidewall white chalk marking decals in 1/20 scale: An extensive decal sheet with a variety of white numbers and markings such as those commonly found on Formula 1 and GTs car tires. Includes inscriptions such as "practice", "set", "test", … and are also valid for your 1/18 scale cars.

Tire barrier like those used in Formula 1. It is the perfect complement to give a touch of realism to your 1/43 scale dioramas.

Set of five HANS devices in 1/43 scale for complementing your figures and dioramas of formula 1 and GTs.

A modern racing driver, wearing a HANS device, celebrating victory with an elaborate pose. This figure is based upon Charles Leclerc's pose, having won the Belgian Grand Prix in 2019.

A modern racing driver, wearing a HANS device, celebrating victory with an elaborate pose.

Modern formula 1 driver, with a HANS device, celebrating victory with an elaborate pose. This figure is based on Lewis Hamilton in his victory at the 2016 Monaco Grand Prix.

A modern driver wearing a cap, jumping for joy at the top of the podium (modelled on Michael Schumacher's famous pose). It is suggested that this figure is mounted from the back to give the impression of the figure being in mid-air. Also includes a champagne bottle in transparent green resin.

A modern driver standing on the podium, looking down at his team, giving a thumbs-up. He is holding his cap behind his back. Ideal for a podium diorama, partnered with BW43007. Also includes a champagne bottle in transparent green resin.

A mid-90's F1 driver, riding back to the pits on a rival's car, celebrating victory (this figure is based upon Jean Alesi's pose, winning the Canadian Grand Prix in 1995). This figure has been designed to fit the Benetton Renault B195 kit by Tameo Kits (TMK200)

The helmets are intended as an accessory for those wishing to add more detail to their models. Included is a template to cut visors from clear plastic .

Five helmets with closed visors, which can be used with any of the helmeted figures in the Bad Wolf Miniatures range. Ideal as replacements for lost helmets, of for use in a diorama.

Ten champagne bottles in transparent green resin. Perfect for a replacement if the original gets lost, but also perfect for podium or motorhome dioramas.

Logos of the prestigious Ferrari brand so you can customize your own vehicle, regardless of the scale of the model you are building.

Logos of the prestigious Lamborghini brand in red for customizing your own vehicle, regardless of the scale of the model you are building.

Time-limited reedtion of this gorgeous photo-etched parts sheed for the Ferrari 330 P4 kits by Fujimi. Fantastic!!

The Tamiya model of the Ferrari 310B is wonderful, but it lacks a small detail to be totally "complete", the Marlboro tobacco decals. For those who do not want to do without this important detail when assembling their model, this sheet by Tabu Design is the solution.

Do you want to see your MP4/8 with all the original sponsors? Don't miss the Marlboro logos and rubber stickers, and bring your kit to life.

Enhance the beauty and realism of your Tamiya kit with this set of two decal sheets with carbon fiber patterns that Studio27 has specially developed for the Honda RC213V.

Although the Yamaha YZF-R1M is a street bike, it is becoming more and more common for brands to incorporate some carbon parts, both to reduce weight and to resemble their competition counterparts. Studio27 has created a decal sheet with the necessary carbon patterns to decorate the fairing, fenders, rear cowl, and for other details and parts of your Yamaha YZF-R1M Tamiya kit.

Decals with all the logos and badges missing in the Ferrari 312T4 scale model kit by Tamiya. It works for the original kit as well as for the re-edition.

The Honda CBR1000RR was born to be used in the WSBK, so weight is vital, which is why several of its parts are made of carbon... apart from the aesthetically pleasing finish. So that your Tamiya kit does not lack detail, we present you the carbon frames designed by Studio27 for use in the 1/12 scale Honda CBR1000RR-R Fireblade SP. Simply wonderful!!!

Kit based on the 936 with number # 4 driven by J.Barth / H.Haywood / J.Ickx, winner at Le Mans in 1977. Includes a complete and detailed kit of various materials, including white metal, resin, photo-etched parts, turned parts made of metal, rubber tires including pre-printed sponsor logos, silk-printed decals and various cables that allow the maximum realism with the original vehicle. Aluminum turned parts are used for the wheels, headlight trim, wheel shaft and locknut. The front and rear cowl are removable, and the doors open and close allowing a full view of the detailed interior after assembly is complete.

Pre-thinned paint bottle ready for airbrush use, including 30ml of product. It has been formulated to match the white tone used in the Audi R8 LMS GT3.

Pre-thinned paint bottle ready for airbrush use, including 30ml of product. It has been formulated to match the black tone used in the Audi R8 LMS GT3.