Newsletter 420: Candy!!!

Here you have the long-awaited plastic Peugeot 306 Maxi, with a really complete parts list, with all the bottom and the interior extensively detailed. It includes the livery of the two official drivers designated by Peugeot for the 1996 Monte Carlo Rally, Francois Delecour and Francois Chatriot, where Delecour achieved a fantastic second place finish making the most of a Monte Carlo with virtually no snow.

This is the perfect photo-etched parts set for the Peugeot 306 Maxi, manufactured by Nunu. Includes radiator grilles, brake discs, windshield wipers, hood latches, harness seatbelt bucles, etc. recreated in photo-etched parts. And if those weren't enough, it also includes a decal sheet with various logos, and carbon fibre and Kevlar patterns for the bucket seats. To finish, you also have the fabric to simulate the harnesses, the base of the antenna in turned metal, and the roof antenna in metal.

This time we bring you the Group B MG Metro 6R4, edited by the European manufacturer Belkits. In the huge box you will find a huge pile lot of parts, since the model includes a fully detailed engine, interior, the whole transmission and the steering, in addition to several photo-etched parts, Cartograf printed decals , and material to make the harnesses. Night lights are also included. A model that is absolutely essential on your shelf.

Second variant of the incredible group B MG Metro 6R4 from the European manufacturer Belkits, in this case the Rothmans team from the 1986 season. In the huge box you will find a lot of parts since the model includes the entire engine exploded and detailed , as well as the interior, all transmission and steering, as well as various photo-etched parts, decals printed by Cartograf, and material to make the harnesses. Also included are the headlight pod for the night sections. An absolutely indispensable kit for your showcase .

Reedition of the classic Tamiya kit, but retouched by Ebbro with the necessary parts to recreate the version used in the 1968 British Grand Prix, held at Brands Hatch. In addition, photo-etched parts have been added. The kit allows you to reproduce the Matra 10-cylinder V engine, different from the Ford V8 used by Steward in car #14, and it comes with two rear wing configurations, so you can also mount the smaller one that was used in practice, and that it was placed in a more delayed position. This kit is a LIMITED series with a very small production.

Time-limited reedition of this seasoned Tamiya kit. HURRY before they fly off the shelves!

New Tamiya scale model kit, this time recreating the Honda CBR1000RR-R Fireblade SP. In the box you will find an endless pile of plastic parts, since the engine is completely exploded and detailed, as well as the rest of the motorcycle parts. Don't let her run away!!

New reedition of this fantastic MFH kit, in very limited quantities . If you want it, do not hesitate a second to order yours now!!!

New reedition of this fantastic MFH kit, in very limited quantities. If you want it, do not hesitate a second to order yours now!!!

The single-seater that occupied the third step of the podium at the 1970 Monaco Grand Prix, driven by Henri Pescarolo, and now reproduced in 1/20 scale by Model Factory Hiro. Inside the box you will find turned metal parts, white metal parts, photo-etched parts, and all the magic of the fabulous multimedia kits from this Japanese manufacturer. New reedition of this fantastic MFH kit, in very limited quantities. If you want to have it, do not hesitate a second to order yours now!!!!

The 3rd place single seater at the 1970 Belgian Grand Prix, driven by Beltoise, and now reproduced in 1/20 scale by Model Factory Hiro. Inside the box you will find turned metal parts, white metal parts, photo-etched parts, and all the magic of the fabulous multimedia kits from this Japanese manufacturer. New reedition of this fantastic MFH kit, in very limited quantities. If you want to have it, do not hesitate a second to order yours <now!!!!

New reedition of this fantastic MFH kit, in very limited quantities . If you want it, do not hesitate a second to order yours now!!!

Resin pieces and decals to modify the passenger compartment of the Peugeot 106 Xsi from the Hachette Collections 1/24 scale collection model. This detailed set, which includes bucket seats, safety arch, wheels, base with the floor simulating the "naked" sheet metal, dashboard, etc., allows you to transform the street version into a full group A rally vehicle. And if you have no idea what decoration to use, Renaissance offers us an alternative to the version that participated in the Tour de Corse Rally in 1993.

Decoration of the Porsche 935 Kremer K3 sponsored by BP Malardeau as it raced the 24 Hours of Le Mans in 1982, finishing in 5th position.

Set of four 15-inch Speedline 3220 rims with smooth tires. The diameter of the rims is 16.5mm and the width is 7mm. The tire has a diameter of 24mm by 8mm wide.

French blue paint formulated to decorate the Bugatti Type 35 . It is served ready for airbrush use, in a 60ml bottle.

Decoration for the Group B Opel Manta 400 that finished in third position in the Rally Manx, with Bertie Fisher at the wheel.

Photo-etched parts for detailing the Kenworth K123 / 125 scale model by AMT. Includes the front radiator grille, radiator brackets, exhaust guards, fuel tank caps, etc.

Recently re-edited kit by Hasegawa recreating the Safari version of the Mitsubishi Galant VR-4. The box contains the usual plastic parts and a set of photoetched parts that will help you to give even more realism to your build.

Livery for the Ford Escort RS1600 Mk I that finished second in the 1973 RAC rally, that you can now recreate with these decals and with of the Belkits kits of this classic Ford car.

Decals with all kinds of badges and logos for the interior of competition vehicles to complete the bucket seats, fire extinguishing systems, digital odometers, main panels of the Terratrip and Tripmaster, intercom systems, ecu, etc.