Newsletter 414: R8 LMS GT3

R8 LMS GT3

R8 LMS GT3
Since a few days, what we must do, for both our own safety and for the others, is staying at home. That stops us, for some time, from doing some things we love, like going out for a walk, hanging out with our friends, going for a bike ride, going to the cinema or the theater... But luckily WE CAN do one of the things we like the most in the world... building models!!! :D

In these complex times, the SpotModel staff is glad to work for you and keep sending parcels to your home, even if they arrive with a little more delay or if we have to work even harder to overcome some problems or limitations during their processing (especially on Postal shipments). So you have no excuses that stop you from getting the new Nunu model of the Audi R8 LMS GT3 with the decoration of the 24 Hours of SPA of the year 2015, or some of the recently reissued AMT kits, or the Tamiya sprays for the Alpine or the NSR500 sponsored by Repsol, or ...

For sure, at SpotModel you will find those little things that make your day! :)

Nunu: Model car kit 1/24 scale - Audi R8 LMS GT3 WRT Team #1,2 - 24 Hours SPA Francorchamps 2015 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Reference: PN24004

New Nunu kit, this time recreating nothing less than the Audi R8 LMS GT3 of 2015. Inside the box you will find an extensive parts list, in addition to decals for recreating two of the versions that raced the 24 Hours of SPA.
Click here for more details

Nunu: Detail up set 1/24 scale - Audi R8 LMS GT3 - photo-etched parts, seatbelt fabric, turned metal parts, water slide decals and other materials - for Nunu references PN24004, NU-24004, PN24004 and NUNPN24004

Reference: NE24004

Here's what your scale model kit of the Audi R8 LMS GT3 by Nunu needs: the set of photo-etched parts, decals, seatbelts, and turned metal antenna, all of each carefully designed for improving the looks of your model.
Click here for more details

Zero Paints: Paint remover - Paint Stripper - 1 x 120ml

Reference: ZP-5119

Stripper for paints applied over plastic. It is necessary to wear gloves during use. Shake well before use, and apply a layer of product on the surface to be stripped; leave for 15 to 60 minutes, and apply a second layer if necessary. Once the product has penetrated, rub the surface to remove the paint with the help of a small brush or paintbrush. Wash thoroughly with water to remove product residue.
Click here for more details

Ukrainian Scale Cars Production: Rims and tyres set 1/24 scale - Speedline Rally 16 inches - resin parts and rubber parts - 4 units

Reference: 24W048

Set of four 16-inch Speedline Rally rims, and four semi-slick tires, designed for Aoshima, Fujimi or Tamiya kits.
Click here for more details

AMT: Model car kit 1/16 scale - Chevrolet Bel Air Convertible 1955 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Reference: AMT1134-06

Limited time reedition of this fantastic AMT model. It includes a huge pile of parts, some of them chromed. An American classic that you can now build again!
Click here for more details

Revell: Model car kit 1/24 scale - Porsche 911 996 GT-1 Evo sponsored by Texaco The History Channel #76 - 24 Hours of Daytona 2001 - plastic parts and water slide decals

Reference: 85-2177

Scale model kit for recreating the Porsche 911 996 GT-1 Evo sponsored by Texaco that raced at Daytona. This kit is VERY RARE and difficult to find, since it has been discontinued for years. This kit is delivered WITHOUT THE ORIGINAL BOX and WITHOUT ASSEMBLY INSTRUCTIONS and will be available in limited units for a short period of time.
Click here for more details

Scale Production: Transkit 1/24 scale - Porsche 911 930 Turbo RWB - resin parts - for Tamiya reference TAM24279

Reference: SPTK24061

Set of resin parts for transforming the Porsche 930 kit by Tamiya into the RWB tuner version. Includes the rear spoiler, front spoiler, rear bumper, and heel pockets. The adaptation for the Porsche GT2 requires some modifications on the bodywork. Spoiler brackets and and vertical planes are NOT included, which must be self made from a plastic sheet ("scratch" technique)
Click here for more details

Tameo Kits: Detail 1/43 scale - Selector plate - photo-etched parts and white metal parts - 16 + 16 units

Reference: FT32

Plates and gear sticks for improving your classic street and racing car models in 1/43 scale.
Click here for more details

AMT: Model car kit 1/25 scale - Ford Galaxie Hardtop 500 7-Litre #6 1966 - plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Reference: AMT904

Limited-time reedition of the Ford Galaxie by AMT, which can be built in either it's street or racing version. Includes an extensive parts list featuring chrome parts, and a fully detailed engine and interior.
Click here for more details

AMT: Model car kit 1/25 scale - Chevrolet Camaro Baldwin Motion SS 454 1970 - plastic parts, rubber parts, water slide decals, other materials and assembly instructions

Reference: AMT855-12

Here's one of the most spectacular and beautiful Chevrolets of the 70s, originally released by AMT, and reedited again for a limited time. The customary and beautiful AMT box hides a really interesting parts listing, including a fully detailed engine, chromed parts, and a large decals sheet.
Click here for more details

Tamiya: Spray - Brilliant Orange Repsol TS - 1 x 100ml - for Tamiya reference TAM14077

Reference: TAM89829

Paint specially formulated by Tamiya to paint the NSR500 of the year 1999 as well as all types of vehicles sponsored by Repsol in the late 90s.
Click here for more details

Tamiya: Spray - Coral blue TS-41 - 1 x 100ml - for Hasegawa reference 20411, or Tamiya reference TAM20028

Reference: TAM85041

Specifically formulated tone by Tamiya for decorating the Leyton House sponsored Formula 1 and GTs.
Click here for more details

AMT: Model car kit 1/25 scale - Chevrolet Chevy Impala sponsored by The invincible Iron Man - plastic parts, rubber parts, other materials and assembly instructions

Reference: AMT856-12

Quick assembly scale model of the Chevrolet Chevy Impala decorated with Marvel Iron Man comic stickers. Tires include printed GoodYear logos, and the windows feature pre-painted frames.
Click here for more details

Decalcas: Detail 1/24 scale - Battery master switch - resin parts and water slide decals - 10 units

Reference: DCL-PAR027

Electric cut switch used in rally cars and modern GTs, made in top quality resin. It also includes a decals sheet with assorted electrical icons.
Click here for more details