Newsletter 412: Come hell or high water

Come hell or high water

Come hell or high water
As we wrote last week we are still here, open for you, operating at the same rate and as normally as possible, and putting all our efforts into not letting the exceptional nature of these days reflect in our work, although it is inevitable that the external circumstances affect us all in some way.

Delivery time on some shipment may extended a bit, some manufacturers have temporarily shut down operations, there are some places where couriers are temporarily not delivering... But we don't give up, we know you need us, and we won't let you down :D

Our warehouse goes on shipping your orders as always, and we work day and night to make sure they reach their destination as soon as possible. In the meantime, let's enjoy gluing, sanding, painting and clearcoating our models while we stay patiently at home with our families :)

At SpotModel we will be by your side as long as we can reach you :)

USCP: Transkit 1/24 scale - Mansory AMG GT-S - resin parts and rubber parts - for Revell references REV07028 and 80-7028

USCP Reference: 24T037

Absolutely mind blowing, it's the only workd we can find to describe this transkit to recreat the Mansory AMG GT-S based on the Mercedes Benz AMG GT. Inside the box you will find the bodywork, low profile tires, rims, rear spoiler and other parts, all executed in a thin and silky touch resin, really spectacular. Must be seen to be believed. It is without any doubts a great product from USCP.
Click here for more details

Print Lab Decals: Marking / livery 1/24 scale - Land Rover Series III LWB Station Wagon+Volkswagen Transporter T2 Bussi sponsored by Martini #2, 5 - East African Safari Rally 1978 - water slide decals manufactured with digital technology - for Revell references REV07047 and REV07667

Print Lab Decals Reference: PLB2-467749

Decoration for the assistance vehicles of the Martini Porsche team in the 1978 East African Safari. On that occasion Porsche raced with the 911SC and used a Volkswagen Type 2 and a Land Rover Station Wagon as assistance vehicles fitted with roof racks to transport wheels, tools and spare parts.
Click here for more details

Arena Modelli: Car scale model kit 1/24 scale - Porsche 911SC Group 4 Porsche Almeras Team #9 - Jean-Luc Thrier + Michel Vial - Tour de Corse 1980 - resin multimaterial kit

Arena Modelli Reference: ARE700-24

The model contains engine details and removable rear bonnet for a detailed reproduction of the flat six engine.
Click here for more details

Arena Modelli: Car scale model kit 1/24 scale - Opel Kadett GTE 2000 Group 2 Conrero Team sponsored by Mobil1 #1, 7 - Federico Ormezzano, Roberto 'Rudy' Dalpozzo - Isola d'Elba Rally, Della Lana Rally 1978 - photo-etched parts, resin parts, rubber parts, vacuum formed parts, water slide decals, white metal parts and assembly instructions

Arena Modelli Reference: ARE551-24

New delivery of the Opel Kadett GTE 2000 at 1/24 scale from Arena, with the option of making two decorations corresponding to the Elba Rally (number #7, achieving sixth position) and the Della Lana Rally (number #1, achieving victory) by the 1978 season.
Click here for more details

Scale Production: Rims and tyres set 1/24 scale - 13 inches Ford RS - 3D printed parts, rubber parts and turned metal parts - for Belkits references BEL006, BEL-006, BEL007 and BEL-007, or Italeri references 3650, IT3650, ITA3650 and 3655, or Revell references REV07374 and 7374 - 4 units

Scale Production Reference: SPRF24002+SLICKS

Set of 4 wheels made up of a turned aluminum rim, 3D printed rim core, and slick rubber tires. It corresponds to the 13-inch wheels of the Ford Escort, Fiesta, Capri, etc. in their RS versions of different generations. With the tire mounted, the rim has an overall diameter of approximately 21.5mm.
Click here for more details

Scale Production: Rims and tyres set 1/24 scale - 16 inches Fuchs with stretch wall tyres - metal parts, rubber parts and turned metal parts - 4 units

Scale Production Reference: SPRF24096-1

Fuchs rims featuring turned aluminum rings, metal rim center, and low-profile rubber tires. It corresponds to the 16-inch wheels of the classic Porsche. The measurements of whole tire and rim assembly are 22.3 mm in diameter and 10.0mm wide.
Click here for more details

Evergreen Scale Models: Plasticard - Round solid 0,75mm rod - plastic parts - 10 units

Evergreen Scale Models Reference: EVERGREEN-210

Solid round polystyrene rods, measuring 0.75mm diameter and 36cm long.
Click here for more details

Evergreen Scale Models: Plasticard - Round solid 2.5mm rod - plastic parts - 5 units

Evergreen Scale Models Reference: EVERGREEN-213

Solid round polystyrene rods, measuring 2.5mm diameter and 36cm long.
Click here for more details

Evergreen Scale Models: Plasticard - Round solid 0,64mm rod - plastic parts - 10 units

Evergreen Scale Models Reference: EVERGREEN-219

Solid round polystyrene rods, measuring 0.64mm diameter and 36cm long.
Click here for more details

Evergreen Scale Models: Plasticard - Round solid 0.88mm rod - plastic parts - 10 units

Evergreen Scale Models Reference: EVERGREEN-220

Solid round polystyrene rods, measuring 0.88mm diameter and 36cm long.
Click here for more details

Evergreen Scale Models: Plasticard - Hollow round 2.4mm pipe - plastic parts - 6 units

Evergreen Scale Models Reference: EVERGREEN-223

Hollow round polystyrene pipe, measuring 2.4mm diameter and 36cm long.
Click here for more details

Renaissance Models: Steering wheel 1/43 scale - Three spokes steering wheels rally - photo-etched parts and plastic parts - 4 units

Renaissance Models Reference: VR3

Set of four three spokes steering wheels to detail your competition models at 1/43 scale. Parts are included to assemble up to four steering wheels, made up of a photo-etching for the central core of the steering wheel, and two plastic pieces to simulate the thickness of the outer ring.
Click here for more details

Hasegawa: Car scale model kit 1/24 scale - Toyota 87C Group C Auto Beaurex Motorsport Team #3 - Steven Andskar + Andrew Gilbert-Scott - All Japan Sport Prototype Championship (JSPC) 1988 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Hasegawa Reference: 20351

New version of the Hasegawa kit of the STP sponsored Toyota 87C Group C with the decoration of the Auto Beaurex Motorsport Team, as it raced in the Japanese Championship of Sport Prototypes. It includes a total of 82 parts.
Click here for more details

Fujimi: Car scale model kit 1/24 scale - Porsche 911 R Coupe 1967 - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Fujimi Reference: FJ126678

New reissue for a limited time of this very interesting Fujimi scale model of the Porsche 911 R Coupe. It belongs to the "Enthusiast" series. It includes all the detailed and exploded engine, as it happens with the front compartment, being able to choose to open the hood exposing all its elements.
Click here for more details