Newsletter 365: Detailing

Detailing

Detailing
Decalcas has done it again: they have turned the boss speechless once again, the one who is always bragging about having seen it all in the modeling world (haha), and yet today we have seen him eyes wide open, jaw dropped, mouth drooling and with goosebumps all over...

The reason is none other than the arrival at SpotModel of the long-awaited detail set that Decalcas has manufactured for the Ford GT Le Mans 2017 by Revell. For a long time we wanted to have a look at it first-person, because the pictures we had seen of Sascha Mller's build looked reaaaally good, and when we had it in our hands it did not disappointed. With a packaging as impeccable as usual on the brand, this new set impresses for detail of the resin parts, especially the diffuser, the wheels and the steering wheel. Gentlemen, stuff this good is not seen every day.

The end of this story is more than predictable... once again the boss got missing again (with an unlikely excuse), carrying under his arm both the Revell model and the Decalcas set.

SpotModel loves Decalcas, and you too, right? :)

Decalcas: Detail up set 1/24 scale - Ford GT - 24 Hours Le Mans 2017 - resin parts, water slide decals and assembly instructions - for Revell references REV07041 and 85-4418

Reference: DCL-PAR003

Set of resin parts to be used on the 1/24 scale Ford GT Le Mans kit by Revell, for improving the less detailed areas of the original model such as rims, brake discs and calipers, tyres, rear diffuser, fuel inlets, compressed air intake, steering wheel, etc. All parts have been computer designed with last generation 3D software.
Click here for more details

Decalcas: Marking / livery 1/24 scale - Audi Quattro Sport S1 Audi Sport Team - Hannu Mikkola + Arne Hertz - Toyota Olympus Rally 1985 - water slide decals, assembly instructions and painting instructions - for Beemax Model Kits references B24017 and 103982, or Profil24 reference P24065, or Reji Model reference REJI-2406

Reference: DCL-DEC019

Decoration of the absolute winner of the Toyota Olympus FIA World Championship Rally rally, held in Washington in 1985. The cover image is taken by John P. "Gianni" Burrows and you can see more images of the test at his website Vintage Northwest Motorsport.
Click here for more details

Decalcas: Clear parts 1/24 scale - Guillotine windows for modern GTS and rally cars - Type 02 - other materials

Reference: DCL-VAC015

Transparent plastic sheet precut to size, for replacing the injected plastic side windows that usually include rally car kits and gt in 1/24 scale. Give more realism to your models with these side windows made with the same material as real vehicles, with the possibility of presenting the window opened or closed, as well as greater transparency.
Click here for more details

Decalcas: Clear parts - Transparent window - other materials - 4 units

Reference: DCL-VAC016

Transparent lexan sheet for replacing the windows and injected plastic crystals usually included in rally and gt cars kits in all scales. Give more realism to your models with these sheets made with the same material as real vehicles. Includes 4 sheets measuring 104x73mm.
Click here for more details

Revell: Model truck kit 1/24 scale - Mercedes-Benz Schlingmann Unimog RW1 - plastic parts, rubber parts, water slide decals, other materials, assembly instructions and painting instructions

Reference: REV07531

Time-limited time re-edition of the gorgeous Mercedes-Benz Schlingmann Unimog RW1 fire truck. Includes decals for recreating several versions from different German cities.
Click here for more details

Meng Model: Model bike kit 1/9 scale - Kawasaki Ninja H2R pre-painted version - metal parts, photo-etched parts, plastic parts, rubber parts, water slide decals and assembly instructions

Reference: MT-001s

The kit includes 210 parts, and measures 230mm long by 130mm high once assembled. This IS the version including pre-painted parts. Includes photo-etched parts, chromed plastic parts, rubber stamped plastic parts, rubber tyres and tubes, screws, and a wealth of other parts along with beautiful assembly instructions that will carefully walk you through your genius build of this 1/9 scale Kawasaki Ninja H2R.
Click here for more details

Beemax Model Kits: Detail up set 1/24 scale - Toyota Carina ST191 - photo-etched parts, seatbelt fabric, turned metal parts and water slide decals - for Beemax Model Kits reference B24024

Reference: E24024

Enhancement set for the Toyota Carina ST191 by Beemax / Aoshima, including photo-etched parts for the interior and exterior of the car, metal antenna, harness fabric, and decals. Absolutely essential if you want to add further detail your model!
Click here for more details

Zero Paints: Paint - Caterpillar yellow - 1 x 60ml - for Airbrush

Reference: ZP-1358

Yellow paint similar to the tone used in Caterpillar heavy machinery. It is served ready for airbrush use, in a 60ml bottle.
Click here for more details

Italeri: Model truck kit 1/24 scale - Scania R400 Streamline flat roof - plastic parts, rubber parts, water slide decals, assembly instructions and painting instructions

Reference: 3947

New edition of the Scania R400, this time with the diffuser over the cabin. As usual in Italeri, it includes a fully detailed engine and cabin, and spectacular decals.
Click here for more details

Studio27: Detail up set 1/24 scale - Nissan R91CP Group C - photo-etched parts, seatbelt fabric, white metal parts and assembly instructions - for Hasegawa references 21131, HC-31 and HSGHC31

Reference: ST27-FP24212

Set of photo-etched parts designed for further detailing the Nissan R91CP kit by Hasegawa. The set includes brake discs, quick locks, radiator grilles, mirrors, pedals, windshield wipers, harness buckles, etc.
Click here for more details

Studio27: Carbon fibre pattern decal 1/12 scale - Kawasaki Ninja ZX-RR - water slide decals and assembly instructions - for Tamiya reference TAM14109

Reference: ST27-CD12008

Decal sheet featuring the carbon fibre patterns needed for decorating the fairing, fender, rear cowling and other details and parts of your Kawasaki Ninja ZX-RR by Tamiya.
Click here for more details

Model Factory Hiro: Model bike kit 1/9 scale - Harley Davidson Panhead 1948 - metal parts, photo-etched parts, resin parts, rubber parts, water slide decals, white metal parts, other materials, assembly instructions and painting instructions

Reference: MFH-K712

Do you like bikes? Are you a highly skilled modeler, or want to earn your stripes? In that case, do not miss this exclusive scale model kit of one of the most beautiful and interesting bikes from the last century.
Click here for more details

Renaissance Models: Marking / livery 1/24 scale - Ford Fiesta WRC DMACK World Rally Team #3 - Elfyn Evans + Daniel Barrit - Wales Rally GB, Monte Carlo Rally - Rallye Automobile de Monte-Carlo 2017 - water slide decals and assembly instructions - for Belkits reference BEL013

Reference: TK24-460

Decoration of the Ford Fiesta WRC of the DMack team as it raced the Rally of Wales and Montecarlo in 2017. Printed by Interdecal with their new manufacturing systems, resulting in a thinner and more detailed decal.
Click here for more details