Newsletter 364: Raid-Sur

Three-spoke steering wheels in 1/43 scale, such as those used in racing and street cars during the 40s, 50s and 60s. The steering wheel core comes in a photo-etched part and the rim part is made up of two semicircles of injected plastic.

Decoration for the Tamiya model of the Honda RC213V in 1/12 scale corresponding to the Marc VDS team sponsored by Estrella Galicia during the 2016 Moto GP World Championship. In addition to the decals, templates are included to make the masks for painting the fairing, and resin parts to modify the fairing in the area around the handlebar and to reproduce the communication antenna on the rear tail.

Decoration used in the Yamaha YZF-R1 for celebrating the 60th anniversary of Yamaha Motorcycles, inspired by the decoration used by Kenny Roberts in competition.

Livery for the Yamaha YZF-R1 for celebrating the 20th anniversary of its market launch.

Michelin, Bridgestone and Battlax logos as well as various brands and labels used on the tires and rims of the MotoGP World Championship bikes.

Decoration of Sunji Yathushiro's Honda NSR500 during the 1986 World Championship, with which he achieved 7 points and position 13th at the end of the season.

Decoration of the Ducati 916 Senna special edition in honor of the Formula 1 driver Ayrton Senna. The set includes photo-etched parts, decals and resin parts.

Decoration of the bike ridden by Stoner and Marquez during the tests performed by the HRC team at Motegui and Sepang circuits in 2014 and 2015, designed to be used with your Tamiya model of the Honda RC213V.

Decoration of the machine ridden by Marquez at the 2014 Motorcycle Grand Prix held in Brno. Includes resins and decals in addition to the instructions to execute the assembly correctly.

Michelin, Dunlop, Michelin Pilot and Bridgestone logos designed to be used in a large number of Tamiya motorcycle scale model references in 1/12 scale.

Michelin Pilot logos specifically designed to be used in 90's race motorcycles scale models in 1/12 scale, specially those manufactured by Tamiya.

Decoration to reproduce the Honda NSR500 with which Shinichi Itoh raced in the first round of the 500cc Motorcycle World Championship in 1989, held at the Suzuka circuit. The decal sheet has been specially designed to be used on the Hasegawa kit, and includes patterns to make the masks with which to separate the different colours of the fairing when painting it and that adjust to the size of the decals,

Decoration to reproduce the Honda NSR500 with which Pierfrancesco Chili raced in the 500cc Motorcycle World Championship in 1989. The decal sheet has been specially designed to be used on the Hasegawa kits, and includes patterns to make the masks with which cover the white areas and thus be able to paint the yellow areas,

Photo-etched parts designed to replace the front and rear brake discs of the Honda NSR500 Hasegawa kit from 1989. These discs faithfully reproduce the brake discs used by the private teams that used the Honda during the 1989 World Championship season of 500cc, such as the HB Gallina, the Elf Lubricants or the Seed Racing. The front discs have an outer diameter of 27.5 mm, and an internal diameter of 22.3 mm.

These decals will allow you decorating your Ducati Panigale S model in 1/12 scale of the in the variant made in commemoration of Ayrton Senna.

These decals including Michelin Radial logos and badges have been designed to use in the tires of the Motorcycling World Championship bikes of the 80s.

Decals for you to make the decoration of the FZR750 that raced in the 24 Hours of Bol d'Or back in 1985, although unfortunately for the team they had to abandon around the 20th hour due to an engine failure. Includes tobacco logos.

There are decorations that, if they did not exist, would have to be invented. Based on the same Revell model of the Porsche 934 RSR of the Jägermeister and Vaillant versions, it is now the turn of a variant sponsored by Martini, taking as a reference the decoration used in other Porsches by the driver David Betts. The kit maintains the option of detailing the area of the front opening under the hood, where elements such as the fuel tank or the turret reinforcement bar are located, as well as detailing the rear engine.

Resin made figure, unassembled and unpainted, recreating the famous mechanic and hot-rodder Aaron Kaufman.

Set of photo-etched parts, carbon decals, and other parts, for improving and detailing the BMW M6 GT3 kit from Platz and Nunu. The set works for all the different models previously published.

After almost achieving it in '96, and staying further the previous year, Porsche returned to the fray at the 1998 Le Mans 24 Hours with a more refined and evolved Porsche 911 GT1, achieving an undeniable double, being the unit with the dorsal #26 the one that crossed the finish line in first position. Most of the pieces in this model are executed in resin, which are complemented by a photo-etched plate for the finer details, all with the usual quality and detail of Profil24.

Multi material kit recreating the Aston Martin Vantage GTE as it raced in 2018 and 2019 at the 24 Hours of Le Mans in the LMGTE PRO category