Newsletter 279: Spares

Spares

Spares
Raise your hand those of you who ever, by accident, destroyed a decal, scratched a glass, lost some tiny little part, or split a bodywork in half... Wow, there are more than a few hands raised out there!

Without a doubt, we have all gone through these problematic moments, and that's because being a patient, delicate, meticulous and detailed modeler doesn't mean that, from time to time, "we don't make a complete mess"...

But don't worry!!!! At SpotModel we are launching the new "Spare Parts" category for your models, where we will gradually add lots of spare parts references. Don't you just love it?

SpotModel: for scale modellers, by scale modelers ;)

Zero Paints: Hardener - Spare Hardener for Diamond Finish 2K clearcoat Set - 1 x 60ml - for Zero Paints references ZP-3035 and ZP-3043 image

Zero Paints: Hardener - Spare Hardener for Diamond Finish 2K clearcoat Set - 1 x 60ml - for Zero Paints references ZP-3035 and ZP-3043

Zero Paints Reference: ZP-3035b

Spare catalyst for use with the Zero Paints Diamond Finish - 2 Pack GLOSS Clearcoat System, in a 60ml bottles. The manufacturer recommends using the product within six months counted from the date of purchase, since past that time frame it loses properties and can damage your model when applied.
Click here for more details

Model Factory Hiro: Car scale model kit 1/12 scale - Porsche 917K Martini International Racing Team #22 - Helmut Marko + Gijs van Lennep - 24 Hours Le Mans 1971 - photo-etched parts, resin parts, rubber parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts, other materials and assembly instructions

Model Factory Hiro Reference: MFH-K609

Scale kit to assemble the version of the Martini team that won the 1971 24 Hours of Le Mans. A complete and detailed kit that includes white metal parts, resin parts, photo-etched parts, vacuum formed parts, turned metal parts, rubber tires with prepainted manufacturer's logos, decals, etc. Once assembled, the model allows you to remove the front and rear hoods, as well as the doors, leaving the complete interior and mechanical parts visible. This reference features a front hood with different air intakes for the grilles compared to the previous season's version, in addition to vertical fins that were mounted on the back of the rear hood to improve high-speed stability on the straights.
Click here for more details
Model Factory Hiro: Car scale model kit 1/12 scale - Porsche 917K John Wyer Automotive Engineering Team sponsored by Gulf #1, 2, 19 - Richard Attwood (GB) + Herbert Müller (CH), Joseph 'Jo' Siffert (CH) + Derek Bell (GB), Pedro Rodriguez (MX) + Jackie Oliver (GB) - Monza 1000 Kilometres, 24 Hours Le Mans 1971 - photo-etched parts, resin parts, rubber parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts, other materials and assembly instructions image

Model Factory Hiro: Car scale model kit 1/12 scale - Porsche 917K John Wyer Automotive Engineering Team sponsored by Gulf #1, 2, 19 - Richard Attwood + Herbert Mller, Joseph 'Jo' Siffert + Derek Bell, Pedro Rodriguez + Jackie Oliver - Monza 1000 Kilometres, 24 Hours Le Mans 1971 - photo-etched parts, resin parts, rubber parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts, other materials and assembly instructions

Model Factory Hiro Reference: MFH-K610

Scale kit to be able to assemble the versions of the Porsche 917K of the John Wyer Automotive Engineering team that raced in the events of the 24 hours of Le Mans and the 1000 km of Monza in 1971. A complete and detailed kit that includes white metal parts, parts resin, photo-etched, vacuum-formed, turned metal parts, rubber tires with pre-painted manufacturer's logos, decals, etc. Once assembled, the model allows you to remove the front and rear hoods, as well as the doors, leaving the complete interior and mechanical parts visible. This reference has a different front hood than other teams' cars, with a central air intake under the front window and a different arrangement of the air outlets over the front wheels.
Click here for more details
Model Factory Hiro: Car scale model kit 1/12 scale - Porsche 917K Martini International Racing Team #3, 4 - Vic Elford (GB) + Gérard Larrousse (FR), Helmut Marko (AT) + Gijs van Lennep (NL) - Monza 1000 Kilometres 1971 - photo-etched parts, resin parts, rubber parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts, other materials and assembly instructions image

Model Factory Hiro: Car scale model kit 1/12 scale - Porsche 917K Martini International Racing Team #3, 4 - Vic Elford + Grard Larrousse, Helmut Marko + Gijs van Lennep - Monza 1000 Kilometres 1971 - photo-etched parts, resin parts, rubber parts, turned metal parts, vacuum formed parts, water slide decals, white metal parts, other materials and assembly instructions

Model Factory Hiro Reference: MFH-K611

Scale kit to assemble the version of the silver Porsche 917K Martini that raced in the 1000 km of Monza in 1971. A complete and detailed kit that includes white metal parts, resin parts, photo-etched parts, vacuum formed parts, turned metal parts, rubber tires with prepainted manufacturer's logos, decals, etc. Once assembled, the model allows you to remove the front and rear hoods, as well as the doors, leaving the complete interior and mechanical parts visible. This reference includes two striking induction ducts at the rear that are located on the rear engine cover.
Click here for more details
Scale Production: Transkit 1/24 scale - Mercedes Benz 190 Evo2-T - resin parts and vacuum formed parts - for Fujimi references FJ03322, ID-22, FJ037448, FJ06113, TC-83, FJ06135, TC-62, FJ06233, FJ06245, FJ062457, FJ062648, FJ06271, TC-83, FJ06272, FJ12051, FJ12418, RS-18, FJ12571, FJ125718, RS-14, FJ126692, RS-14, FJ12682, FJ18630, FJ6103, TC-93, FJ62648 and TC-6 image

Scale Production: Transkit 1/24 scale - Mercedes Benz 190 Evo2-T - resin parts and vacuum formed parts - for Fujimi references FJ03322, ID-22, FJ037448, FJ06113, TC-83, FJ06135, TC-62, FJ06233, FJ06245, FJ062457, FJ062648, FJ06271, TC-83, FJ06272, FJ12051, FJ12418, RS-18, FJ12571, FJ125718, RS-14, FJ126692, RS-14, FJ12682, FJ18630, FJ6103, TC-93, FJ62648 and TC-6

Scale Production Reference: SPTK24058

Impressive, as usual, the resin from Scale Production, on this occasion to carry out the transformation of any of the Fujimi kits of the Mercedes 190E, both in its Group A versions and in the versions of the 190E 2.5-16 Evolution II, in the station wagon variant of the Mercedes Benz 190 Evo2-T.
Click here for more details

Molotow: Masks - Grafx art masking liquid pump maker 4 mm

Molotow Reference: 728002

Molotow art masking liquid 4MM is a rechargeable masking pen with 4mm interchangeable tips. It contains an ink composed of masking liquid that allows to create a film to protect / mask. It dries very fast so the film that is created with the liquid masking allows us to continue painting on the protected area. Once dried for 15-20 min, we can now remove it with the finger or with a rubber.
Click here for more details

Molotow: Masks - Masking liquid refill - 1 x 30ml

Molotow Reference: 693600

30ml refill of liquid mask for use with either airbrush or Molotow rechargeable markers.
Click here for more details
Beemax Model Kits: Detail up set 1/24 scale - Toyota Corolla Levin AE92 Group A - photo-etched parts and seatbelt fabric - for Beemax Model Kits references B24010 and Aoshima 098240, or Nunu references PN24016 and PN-24016 image

Beemax Model Kits: Detail up set 1/24 scale - Toyota Corolla Levin AE92 Group A - photo-etched parts and seatbelt fabric - for Beemax Model Kits references B24010 and Aoshima 098240, or Nunu references PN24016 and PN-24016

Beemax Model Kits Reference: E24010

Upgrade kit by Beemax to be used in your Group A Toyota Corolla Levin AE92 scale model kit. It includes a photo-etched parts sheet and material to recreate both driver and co-drivers harnesses.
Click here for more details
Model Factory Hiro: Reference / walkaround book - JOE HONDA Sportscar Spectacles by Hiro: Part 1 - Can-Am Canadian-American Challenge Cup 1970 image

Model Factory Hiro: Reference / walkaround book - JOE HONDA Sportscar Spectacles by Hiro: Part 1 - Can-Am Canadian-American Challenge Cup 1970

Model Factory Hiro Reference: MFH-SS010

First issue of the "Sportscar Spectacles - Sport Prototypes" series about the Can-Am races celebrated in 1970, including Mont-Tremblant, Watkins Glen, and Mid-Ohio races, and featuring a total of 106 pages.
Click here for more details

Hasegawa: Car scale model kit 1/24 scale - Porsche 968 Club Sport - plastic parts, rubber parts, water slide decals and assembly instructions

Hasegawa Reference: 20317

Here is the limited time re-edition of the Sport Club version of the Porsche 968 by Hasegawa. The kit includes a detailed engine and body parts injected in yellow plastic.
Click here for more details
Studio27: Carbon fibre pattern decal set 1/24 scale - Mitsubishi Lancer Evo VI - water slide decals and assembly instructions - for Tamiya references TAM24213 and TAM24220 image

Studio27: Carbon fibre pattern decal set 1/24 scale - Mitsubishi Lancer Evo VI - water slide decals and assembly instructions - for Tamiya references TAM24213 and TAM24220

Studio27 Reference: ST27-CARBOND24024

Carbon fiber and kevlar patterns for the Mitsubishi Lancer Evo VI by Tamiya. It can be used in both rally and street versions.
Click here for more details
Tamiya: Masks - Masking tape for curves 12mm image

Tamiya: Masks - Masking tape for curves 12mm

Tamiya Reference: TAM87184

Tamiya took a big big step forward creating this 12 mm wide and 20 meters long masking tape, reaaaally helpful when executing straight lines and/or curves on your models.
Click here for more details