Newsletter 131: It's springtime!April 16th, 2014
It's springtime!
Spring weather is finally arriving to our latitude, and with it our wharehouse is blooming with a thousand shades thanks to the arrival of a new shipment from Zero Paints, perfect to give that touch of color to your kits :)We have Benetton, Lola, Sauber and Michelin blues, as well as McLaren MP4-12C purple pearl, Sauber C14 dark blue and Tamiya TS58-like pearl light blue.
In the yellow ranges, we have... almost all! Brembo yellow, Jordan yellow, Minardi yellow, Michelin yellow, Benetton yellow...
Talking about Benetton, we also have the Team Benetton Alfa Romeo and Castrol Lotus 107B greens as well.
Switching towards warmer tones, we have the Gulf orange, and the Mica and Lola reds.
And in our Accessories section, not to be missed the official SpotModel™ masking tape and 30ml bottles spare caps (so you won't run short nor long :), and a couple of Reji transkits just in case you don't have anything at hand to paint :)
Get carried along by the spring at SpotModel! :D
Zero Paints: Paints set for airbrush - Michelin Pilot Ford Escort RS - Blue and Yellow - 2 x 30ml - for Tamiya reference TAM24153
Reference: ZP-1260
All paints are pre-thinned for airbrush use, to a consistency suitable for airbrushes with nozzle sizes of 0.3mm upwards. It is NOT recommended to overthin the paint: mixing too much thinner will increase the chance of the paint becoming too hot during application, thus affecting/melting the plastic below the primer. If unsure, we recommend you to test it first before applying to your kit.
SpotModel: Masks - Masking tape 3mm (20 meter roll)
Reference: SPOT-006
Paint mask specifically designed to be used with your scale models. It has a very good adherence while it can be easily removed. Its thickness will allow you to adjust the mask to both flat and curved surfaces. It measures 20 meters long by 3mm wide.
Zero Paints: Paint for airbrush - Beatrice-Lola THL2 Ford THL2 Red - 1 x 60ml - for Airbrush
Reference: ZP-1266
All paints are pre-thinned for airbrush use, to a consistency suitable for airbrushes with nozzle sizes of 0.3mm upwards. It is NOT recommended to overthin the paint: mixing too much thinner will increase the chance of the paint becoming too hot during application, thus affecting/melting the plastic below the primer. If unsure, we recommend you to test it first before applying to your kit.
Zero Paints: Paint for airbrush - Benetton B197 - B198 Light Blue - 1 x 60ml - for Airbrush
Reference: ZP-1262
Blue color tone specifically formulated for decorating the Benetton B197 and B198. Designed for airbrush use.
Zero Paints: Paint for airbrush - Benetton B193 Signal Yellow - 1 x 60ml - for Airbrush
Reference: ZP-1268
All paints are pre-thinned for airbrush use, to a consistency suitable for airbrushes with nozzle sizes of 0.3mm upwards. It is NOT recommended to overthin the paint: mixing too much thinner will increase the chance of the paint becoming too hot during application, thus affecting/melting the plastic below the primer. If unsure, we recommend you to test it first before applying to your kit.
Zero Paints: Paint for airbrush - Benetton Team Alfa Romeo 185T Green United Colors of Benetton - 1 x 60ml - for Airbrush
Reference: ZP-1263
All paints are pre-thinned for airbrush use, to a consistency suitable for airbrushes with nozzle sizes of 0.3mm upwards. It is NOT recommended to overthin the paint: mixing too much thinner will increase the chance of the paint becoming too hot during application, thus affecting/melting the plastic below the primer. If unsure, we recommend you to test it first before applying to your kit.
Zero Paints: Paint for airbrush - Brembo Brake Yellow - 1 x 30ml - for Airbrush
Reference: ZP-1255
All paints are pre-thinned for airbrush use, to a consistency suitable for airbrushes with nozzle sizes of 0.3mm upwards. It is NOT recommended to overthin the paint: mixing too much thinner will increase the chance of the paint becoming too hot during application, thus affecting/melting the plastic below the primer. If unsure, we recommend you to test it first before applying to your kit.
Zero Paints: Paint for airbrush - Bright Mach Blue - Similar to Tamiya MS4 - 1 x 60ml - for Airbrush
Reference: ZP-1256
All paints are pre-thinned for airbrush use, to a consistency suitable for airbrushes with nozzle sizes of 0.3mm upwards. It is NOT recommended to overthin the paint: mixing too much thinner will increase the chance of the paint becoming too hot during application, thus affecting/melting the plastic below the primer. If unsure, we recommend you to test it first before applying to your kit.
Zero Paints: Paint for airbrush - Bright Mica Red Paint - Similar to Tamiya TS-85 - 1 x 60ml - for Airbrush
Reference: ZP-1254
All paints are pre-thinned for airbrush use, to a consistency suitable for airbrushes with nozzle sizes of 0.3mm upwards. It is NOT recommended to overthin the paint: mixing too much thinner will increase the chance of the paint becoming too hot during application, thus affecting/melting the plastic below the primer. If unsure, we recommend you to test it first before applying to your kit.
Zero Paints: Paint for airbrush - Gulf Orange - 1 x 60ml - for Airbrush
Reference: ZP-1259
All paints are pre-thinned for airbrush use, to a consistency suitable for airbrushes with nozzle sizes of 0.3mm upwards. It is NOT recommended to overthin the paint: mixing too much thinner will increase the chance of the paint becoming too hot during application, thus affecting/melting the plastic below the primer. If unsure, we recommend you to test it first before applying to your kit.
Zero Paints: Paint for airbrush - Jordan EJ11 Yellow - 1 x 60ml - for Airbrush
Reference: ZP-1270
All paints are pre-thinned for airbrush use, to a consistency suitable for airbrushes with nozzle sizes of 0.3mm upwards. It is NOT recommended to overthin the paint: mixing too much thinner will increase the chance of the paint becoming too hot during application, thus affecting/melting the plastic below the primer. If unsure, we recommend you to test it first before applying to your kit.
Zero Paints: Paint for airbrush - Lola LC87, LC88, LC89 Blue - 1 x 60ml - for Airbrush
Reference: ZP-1265
All paints are pre-thinned for airbrush use, to a consistency suitable for airbrushes with nozzle sizes of 0.3mm upwards. It is NOT recommended to overthin the paint: mixing too much thinner will increase the chance of the paint becoming too hot during application, thus affecting/melting the plastic below the primer. If unsure, we recommend you to test it first before applying to your kit.
Zero Paints: Paint for airbrush - Lotus Ford 107B Castrol Green - 1 x 60ml - for Airbrush
Reference: ZP-1261
All paints are pre-thinned for airbrush use, to a consistency suitable for airbrushes with nozzle sizes of 0.3mm upwards. It is NOT recommended to overthin the paint: mixing too much thinner will increase the chance of the paint becoming too hot during application, thus affecting/melting the plastic below the primer. If unsure, we recommend you to test it first before applying to your kit.
Zero Paints: Paint for airbrush - Minardi M02 Yellow - 1 x 60ml - for Tameo Kits reference TMK292
Reference: ZP-1264
All paints are pre-thinned for airbrush use, to a consistency suitable for airbrushes with nozzle sizes of 0.3mm upwards. It is NOT recommended to overthin the paint: mixing too much thinner will increase the chance of the paint becoming too hot during application, thus affecting/melting the plastic below the primer. If unsure, we recommend you to test it first before applying to your kit.
Zero Paints: Paint for airbrush - Pearl Light Blue - Similar to Tamiya TS-58 - 1 x 60ml - for Airbrush
Reference: ZP-1257
All paints are pre-thinned for airbrush use, to a consistency suitable for airbrushes with nozzle sizes of 0.3mm upwards. It is NOT recommended to overthin the paint: mixing too much thinner will increase the chance of the paint becoming too hot during application, thus affecting/melting the plastic below the primer. If unsure, we recommend you to test it first before applying to your kit.
Zero Paints: Paint for airbrush - Purple Pearl for Mclaren MP4-12C GT3 Super GT 2013 #2 EVA RT - 1 x 60ml - for Airbrush
Reference: ZP-1258
All paints are pre-thinned for airbrush use, to a consistency suitable for airbrushes with nozzle sizes of 0.3mm upwards. It is NOT recommended to overthin the paint: mixing too much thinner will increase the chance of the paint becoming too hot during application, thus affecting/melting the plastic below the primer. If unsure, we recommend you to test it first before applying to your kit.
Zero Paints: Paint for airbrush - Sauber C14 Dark Blue - 1 x 60ml - for Airbrush
Reference: ZP-1267
All paints are pre-thinned for airbrush use, to a consistency suitable for airbrushes with nozzle sizes of 0.3mm upwards. It is NOT recommended to overthin the paint: mixing too much thinner will increase the chance of the paint becoming too hot during application, thus affecting/melting the plastic below the primer. If unsure, we recommend you to test it first before applying to your kit.
Zero Paints: Hobby tool - Spare Caps for 30ml Zero Paints and Alclad bottles
Reference: ZP-2009
Reji Model: Marking / livery 1/24 scale - Subaru Impreza WRC sponsored by Activa #1 - Patrick Snijers + John Muth - Sezoens Rally Belgium 2003 - resin parts, water slide decals, assembly instructions and painting instructions - for Tamiya references TAM24199, TAM24218 and TAM24227
Reference: REJI-099
After its time in the World Rally Championship, the S6 versions of the Subaru Impreza WRC go to private teams, and participate in different national championships, such as the case of this version driven by Snijers in the Sezoens Rally in Belgium in the 2003 season. This Reji transkit includes all the changes made to the Impreza S6 from the year 2000, such as the air intakes on the hood, the front bumper or the roof, as well as the exhaust line, the front spoiler or the rear wing with a shape much more developed. Let yourself be captivated by this striking version!
beta
